rollease acmeda AUTOMATE Pulse 2 Setup Instructions

CREATING A LOCATION: ADDING A CUSTOM HOME IMAGE: STEP 1 – Custom Home Image From the main menu select the location you wish to change the home image for. STEP 2 – Custom Home Image Select “Change Location Image”. STEP 3 – Custom Home Image Choose to “Select Image from Library”. STEP 4 – Custom Home Image You will need to Allow Pulse 2 access to import a picture, Select the image and crop as desired. STEP 1 - Add Location Open the App from the home screen and select the menu button, click “ADD NEW LOCATION”. STEP 2 – Add Loc ...

STEP 3 - Configure a Hub Wait as the App creates a Location for the Hub. STEP 4 – Time Zone Select your Time Zone. This is important for timers to operate correctly. Ensure daylight savings is enabled. STEP 5 - Configure a Hub Make sure that your current Wi-Fi Network aligns with the network you want the hub connected to. STEP 6 - Configure a Hub Open your Wi-Fi settings and connect to the appropriate RA-PULSE-xxx network that corresponds with your hub. STEP 10 - Wi-fi Network Hub Enter your correct Wi-Fi networks password. STEP 7 - Configure ...

STEP 5 – Create a Room Select the appropriate icon for the Room. STEP 6 -Add Shades to a Room Select ‘ROOM DEVICES’ to add a new device to the room. STEP 7 -Add Shades to a Room Select the devices you wish to be added to the room. STEP 8 -Add Shades to a Room Press ‘DONE’ to complete the setup of the room. STEP 9 -Add Shades to a Room Wait for the App to conclude the process of room set up. STEP 10 – Operate a Room Select the Room to operate All shades that have been added to the room at the same time. STEP 11 – Operate a Room Oper ...

STEP 3 - Configure a Hub Wait as the App creates a Location for the Hub. STEP 4 – Time Zone Select your Time Zone. This is important for timers to operate correctly. Ensure daylight savings is enabled. STEP 5 - Configure a Hub Make sure that your current Wi-Fi Network aligns with the network you want the hub connected to. STEP 6 - Configure a Hub Open your Wi-Fi settings and connect to the appropriate RA-PULSE-xxx network that corresponds with your hub. STEP 10 - Wi-fi Network Hub Enter your correct Wi-Fi networks password. STEP 7 - Configure ...

MEANING OF ICONS: App Screen Icon MEANING STATUS Signal Strength Icons • Excellent Greater than -89 • Satisfactory Between -96 to -89 • Low Between -102 to -97 • No Signal Between -102 to -97 Battery Percentage Icon 3 Levels of Battery Full 100-70% Medium 69-11% Low 10% or less (and motor starts beeping) Pop up Motor Offline Pop up reminder The motor is offline, and the control device is not on the same network. Motor Offline The motor is offline, and the control device is not on the same network. Greyed out Icons Sig ...

HOW TO SHARE THE HUB: STEP 1 - Share a Hub In the ‘Add a Hub’ Screen, it is possible to connect to a shared hub. STEP 2 - Share a Hub The HUB must have been shared from another account. STEP 3 - Share a Hub The shared Hub will be listed on the shared Hubs list to be added. STEP 4 - Share a Hub After it is added, the shared hub will appear under the Location Settings it was added to with a red ‘S’ ...

HOW TO SHARE THE HUB: STEP 1 - Share a Hub In the ‘Add a Hub’ Screen, it is possible to connect to a shared hub. STEP 2 - Share a Hub The HUB must have been shared from another account. STEP 3 - Share a Hub The shared Hub will be listed on the shared Hubs list to be added. STEP 4 - Share a Hub After it is added, the shared hub will appear under the Location Settings it was added to with a red ‘S’ ...

STEP 3 - Configure a Hub Wait as the App creates a Location for the Hub. STEP 4 – Time Zone Select your Time Zone. This is important for timers to operate correctly. Ensure daylight savings is enabled. STEP 5 - Configure a Hub Make sure that your current Wi-Fi Network aligns with the network you want the hub connected to. STEP 6 - Configure a Hub Open your Wi-Fi settings and connect to the appropriate RA-PULSE-xxx network that corresponds with your hub. STEP 10 - Wi-fi Network Hub Enter your correct Wi-Fi networks password. STEP 7 - Configure ...