Satel OPAL Manual 

Text of the manual

Outdoor dual technology motion detector

Firmware version 3.00 opal_en 03/21 SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND tel. +48 58 320 94 00 www.satel.eu

The device should be installed by qualified personnel.

Prior to installation, please read carefully this manual. Changes, modifications or repairs not authorized by the manufacturer shall void your rights under the warranty. SATEL aims to continually improve the quality of its products, which may result in changes in their technical specifications

Features ........................................................................................................................... 2

2. Description ........................................................................................................................ 2 Anti-mask feature .........................................................

The OPAL detector detects motion in the protected area. It is designed for outdoor use.

This manual applies to the detector with electronics version D. The detector meets the requirements of the EN 50131-2-4 standard for Grade 2. The Grade 2 certificate applies to the indoor use. The outdoor use of the detector (despite full Grade 2 functionalit

The LEDs indicate:

 warm-up – all LEDs flashing alternately for about 40 seconds;  motion detected by microwave sensor – green LED ON for 4 seconds;  motion detected by PIR sensor – yellow LED ON for 4 seconds;  alarm – red LED ON for 2 seconds;  trouble – all LEDs ON for entire duration of the trouble. Th

Other Security Sensors Manuals