Rohl Perrin & Rowe U.4846LS-2 Installation Instructions

PERRIN & ROWE® MIMAS CONTEMPORARY SINGLE HOLE KITCHEN FAUCET WITH “C” SPOUT AND SIDESPRAY U.4846LS-2 FEATURES • Metal lever handle only • Made from solid brass • 1/4-turn ceramic disc valves • Insulated brass sidespray • 1 3/4” max. installation depth on deck • 15” spout height • 9” reach swivel spout • Inca Brass & English Bronze not available • 1.8 GPM • Requires 2 1/2” clearance from backsplash COLORS/FINISHES • Polished Chrome • Polished Nickel • Satin Nickel WARRANTY • Limited Lifetime 15" 9" 9" 3" 5 1/2" 5" Ø2" Ø2 1/4" Ø1 1/8" HOLE HOSE LENGTH 47 1/4" COLD SUPPLY 1/2" NPSM Ø1 3/8" HOLE HOT SUPPLY 1 3/4" MAX Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.

Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com. Perrin & Rowe is a registered trademark of Avilion Ltd. 904885U Issue 3 * Where indicated please specify color SPARES MIXER SERVICE KIT 9.54885 ROHL WARRANTY POLICY All products supplied by ROHL carry warranties against manufacturing defects. Perrin & Rowe products carry a Limited Lifetime Warranty. ROHL LLC will provide free of charge, as its options, replacement part(s) or product (or a comparable alternative product) to replace those which have proven defective in materials or workmanship. For full ROHL LLC WARRANTY please contact ROHL or visit www.rohlhome.com SPARE PARTS & SERVICE 3 Parker Irvine CA 92618 (714) 557-1933 www.rohlhome.com Perrin & Rowe products are manufactured in the UK, using the latest technology and built to the highest quality standards. We would like to thank you for purchasing a Perrin & Rowe product and take this opportunity to invite you to look at other luxury products by us. Please contact us to recieve our latest catalogue. 9.12861* 9.17862* 9.25552 9.20867* 9.20860* RINSE - 9.13842 NON-RINSE - 9.13843 9.07840 9.17862* 9.25552 9.26400 9.28735 9.28512 RINSE VERSION 9.18381* 9.12840* 9.01840* 9.26860* 9.13841 BAR SPOUT 9.18875* Complete Rinse Head 9.27878* 9.19426 Complete Hose 9.28426* 9.20112* 9.25552 9.17862*

Contemporary Mimas Mono Sink Mixer with Rinse 904885U Issue 3 Temp Range: Min 1°C/34°F Max 85°C/185°F Recommended Working Pressure: Max5bar/75psi Min 1bar/15psi Ideal performance obtained with equal hot & cold pressures. • U.4841LS-2 C-Spout Mono Mixer • U.4846LS-2 C-Spout W/Rinse 1.3/8" HOLE 1.1/8" HOLE uct (or a comparable alternative hip. The Contemporary Kitchen Collection Installation & User Guide ed in the UK, using the latest ity standards. ng a Perrin & Rowe product and ok at other luxury products by us. atalogue. HOT IN 1/2" COLD IN 1/2" 9 1/4" CRS 1 3/8" MAX 9 1/4" CRS 1. 3/8" HOLE HOT IN 1/2" COLD IN 1/2" 1 . 3/4" MAX 6" CRS HOT IN 1/2" COLD IN 1/2" 1 . 3/4" MAX 1. 3/8" HOLE • U.4842LS-2 Bar Spout Mixer 9.20860* 9.28512 RINSE VERSION 9.18381* 9.12840* 9.01840* 9.26860* 9.13841

CARE & MAINTENANCE Wipe down after use to avoid water spottin Occasional cleaning with warm soapy wate plated finish in good condition. Do not use proprietary abrasive liquids products with ammonia bleach or lime guarantee. BEFORE USE • Carefully check the installation for leaks. • If further building work is to be carried ou the finish. • Please ensure that the installation complie 1 2 BASE RING LARGE BASE SEAL SECURING NUT BOX WRENCH Secure spout with supplied Box Wrench. Ensure all connections are firmly tightened • Temperature of the hot water supply does not exceed 185ºF. • Recommended minimum water supply pressure - 25psi. • Recommended maximum water supply pressure - 100psi. • Ideal performance obtained with equal hot & cold pressures. SIDE SPRAY UNIT SOCKET FIB BAC SIDE SPRAY HOSE BLACK RUBBER WASHER SIDE SPRAY SIDE SPRAY UNIT SOCKET FLEXIBLE HOSE Congratulations on the purchase of your Perrin & Rowe Kitchen Product. Correctly installed and with sensible care, this product will give you many years of trouble free service. The Contemporary Kitchen Collection Installation & User Guide IMPORTANT INFORMATION The following instructions are for the rinse and non-rinse version of the model you are installing. Please read carefully to ensure correct installation. Before you proceed... We recommend you engage the services of a registered plumber to install this product. For ease of possible future servicing, we also recommend the fitting of conveniently placed isolating valves. In addition to the guide below it is essential that the written information overleaf is carefully read and understood. Preparation Check Box for Installer Flush the plumbing system before installing the kitchen product. Once unpacked remove large & small base seals, rosette, fixing nut, securing nut and clamp plate ready for installation. CLAMP PLATE 3 Mimas - Lever should be on the right when viewed from the front of the fitting. Hole centre a minimum of 2. 1/2" from the wall. Monobloc mixers require a Ø1. 3/8" hole through the surface they are to be installed on. Maximum counter top thickness 1. 3/4". Insert the flexible connections through the hole ensuring that the base seal is in place between the mixer and mounting surface. From the underside of the counter top, place the clamp plate on the securing stud and using the box spanner supplied, put fixing nut in spanner and tighten until mixer is held firmly in position. SECURING STUD

Please Note: Ceramic disc valves are fitted as standard to this mixer. Flow from FULLY OFF to FULLY ON is achieved by rotating the handles a quarter turn. CARE & MAINTENANCE Wipe down after use to avoid water spotting and mineral build up. Occasional cleaning with warm soapy water, followed by a polish with a soft cloth is all that is required to keep the plated finish in good condition. Do not use proprietary abrasive liquids, powders, or pads to clean the shower. Do not use any products with ammonia bleach or limescale remover. You will damage the plated finish and void your guarantee. BEFORE USE • Carefully check the installation for leaks. • If further building work is to be carried out in the vicinity, cover the tap with a plastic bag to avoid damaging the finish. • Please ensure that the installation complies with the water supply bye-laws. If your mixer has a side spray please follow steps 2 & 3 to install correctly, otherwise please connect Hot & Cold water supplies. Secure side spray unit socket in a suitable position using a faucet wrench or a 36 AF wrench. Place flexible hose through top of side spray unit socket as shown in diagram. Screw flexible hose onto the end of side spray hose. Ensure connections are firmly tightened. Ensure black rubber washer is in place before securing side spray to flexible hose. Holding the side spray, screw the flexible hose onto the end of side spray and place into side spray unit socket. Make sure orientation of side spray is correct. Connect Hot & Cold water supplies to shanks. Ensure all connections are firmly tightened. 2 Wrench. irmly tightened supply does not exceed 185ºF. er supply pressure - 25psi. er supply pressure - 100psi. with equal hot & cold pressures. BASE SEAL SIDE SPRAY UNIT SOCKET FIBRE WASHER BACKNUT SIDE SPRAY HOSE BLACK RUBBER WASHER SIDE SPRAY SIDE SPRAY UNIT SOCKET FLEXIBLE HOSE ctly installed and with sensible care, the model you are installing. egistered plumber to install of conveniently placed tion overleaf is carefully read emove large & small base seals, t, securing nut and clamp plate tion. 3 e right when viewed from the a minimum of 2. 1/2" from the 3/8" hole through the surface they m counter top thickness 1. 3/4". through the hole ensuring that the he mixer and mounting surface. nter top, place the clamp plate on e box spanner supplied, put fixing l mixer is held firmly in position.