Rockford Fosgate RFX-8140 Installation Reference Sheet

Páginas de Referencia para la Instalación Schéma d’Installation Installations Beiblatt Istruzioni di Installation RFX-8140

Detachable Faceplate w/IR Remote RFX-8140 Specification Reference Sheet RFX-8140 ® ® AUD SEL 6 RDM RPT SCAN PAUSE D.SCN DIM 4 3 5 2 1 P.SCN LOUD DSPL CLOCK ILLUM PWR AUTO VOL TUNE COMPACT DIGITAL AUDIO GENERAL • ISO Mountable – 178mm x 50.4mm (trim ring removed) • SMART-On (Sequentially Managed Accessory Remote Turn-On) Separate turn-on leads for amplifiers and signal processors that protect speakers and electronics from damaging transients • Any Button Wake-Up • Clock • Cell Phone Mute • Switchable Loudness – Enables bass response to be boosted at low listening levels • IR Remote Compatible w/ Pulse – Ability to operate functions via remote control as well as trigger external devices (amp racks, neon lights, etc.) • Dimmable Dual Color Illumination – Green or Amber color • Smart Power Antenna Output AUDIOphile PREAMP • Low Source Impedance – Enables multiple amplifiers to be driven without signal loss • 2-ch BAL/RCA Pre-Out – 6-pin Balanced or RCA FEATURES • Source Tone Memory – Enables separate Bass and Treble memory for different formats • Dual External Audio Inputs – Allows the source unit to play additional audio sources (VCR, video game, etc.) • Signal Processor Loop – Allows an external processor to be inserted before the source unit’s volume control TUNER • Gen 3.2 w/patented Digital Automatic Alignment • MIR (Multipath Interference Rejection) – Improves audio performance when radio reception is poor • World Wide Tuner – America/Europe/Aust/Saudi • 24 Station Presets – 6AM/18FM Presets • Auto Store – Auto programming of all 24 presets COMPACT DISC • 5.0 Hologram laser w/multi-damping • Dual 1 Bit D/A Converters w/8x Oversampling • Digital Servo Control w/Auto Focus – Adjusts to CD manufacturing tolerances for accurate tracking SPECIFICATIONS FM TUNER Frequency Response ................................. 30Hz – 15kHz Usable Sensitivity ..........................................20dB @ 1uV Alternate Ch. Selectivity ........................................... 90dB Adjacent Ch. Selectivity ........................................... 50dB 50dB Quieting Sensitivity ........................................ 18dBf Signal-to-Noise Ratio ............................................... 72dB Channel Separation ...................................≥25dB @ 1kHz Capture Ratio ................................................ 2.6 @ 45dBf CD PLAYER Usable Discs ..................................................... 5” and 3” Frequency Response ...................... 20Hz – 20kHz (±2dB) Signal-to-Noise Ratio ............................................. >90dB Channel Separation .................................................. 86dB Dynamic Range ..................................................... 100dB AM TUNER Sensitivity.......................... 31dBf max. @ 10dB sensitivity –6dB Bandwidth ....................... 5kHz min. – 12kHz max. GENERAL Operating Voltage ............................... +10.5 to +16V DC Pre-Out Voltage (vol. max.) ................................ 8.5 Vrms Preamp Output Impedance ....................................... 50Ω Equalization ....................................... Bass ±8dB @ 60Hz Treble ±10dB @ 10kHz Chassis Dimensions ........................... 7"W x 63⁄8"D x 2"H (178mm x 162mm x 50.4mm) Nosepiece Dimensions ................... 71⁄16"W x 7⁄8"D x 2"H (179.7mm x 22.2mm x 50.4mm) Weight ................................................... 3.46 lbs. (1569g) IR REMOTE Dimensions ............................... 29⁄16” W x 33⁄4” L x 3⁄4” H (6.51cm x 9.53cm x 1.9cm) ® ® Specifications subject to change without notice ® 1-6 + – ®

Detachable Faceplate w/IR Remote Installation Reference Sheet Antenna Minimum & Maximum Mounting Angle 20° 20° Antenna Input Turn-On “B” = Amplifier(s) Turn-On “A” = Signal Processor(s) ® ® 1-6 + – IR Remote RFX-1110 Press “Diamond R” Button to Pulse Turn on “C” Battery Replacement (2) CR2032 Ext Aud-1 (L–) Ext Aud-1 (L+) 3 4 5 6 7 8 9 10 1 2 (Looking into the Radio Connector) DIN (R–) DIN (R+) DIN (L GND) DIN (R GND) DIN (L–) DIN (L+) 10 9 8 7 6 5 4 3 2 1 Balanced DIN Harness Ext Aud-1 (R–) Ext Aud-1 (R+) Power Harness (Looking into the Radio Connector) 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 N/C Turn-On “B” Turn-On “A” Turn-On “C“ Audio Mute Ex Audio-2 Sig. Processor Loop IN (R–) Sig. Processor Loop OUT (R–) Sig. Processor Loop IN (L–) Sig. Processor Loop OUT (L–) Chassis Ground (Blue/White) (Lt. Blue) (Blue/Red) (Brown) (Green/White) (Black) N/C Dimmer Out Dimmer In Ignition +12V N/C Pwr. Antenna Sig. Processor Loop IN (R+) Sig. Processor Loop OUT (R+) Sig. Processor Loop IN (L+) Sig. Processor Loop OUT (L+) Battery +12V (Orange/White) (Orange) (Red) (Dk. Blue) (Yellow) + L Signal GND Shield + R Signal – R Signal – L Signal NC NC CD Changer/ Ex Audio-2 DIN (Looking into the Changer DIN) 4 3 2 1 8 7 6 5 12 11 10 9 13 1 2 3 4 5 6 7 8 9 10 11 12 13 Right Signal (+) Audio Common (–) Left Signal (+) Shield (Barrel) Ground N/C N/C N/C N/C Battery (+12V) E&C Data N/C N/C G R E E N Ext. Aud-1 Input White (Left) Bal. Aud. Output (6-pin DIN) Ext. Aud-1 Input Red (Right) Ext. Aud-1 (L–) Ext. Aud-1 (L+) 3 4 5 6 7 8 9 10 1 2 (Looking into the Radio Connector) N/C Right (+) Left (–) Right (–) N/C Left (+) 10 9 8 7 6 5 4 3 2 1 RCA Harness Ext Aud-1 (R–) Ext Aud-1 (R+) G R E E N Ext. Aud-1 Input White (Left) Audio Output White (Left) Ext. Aud-1 Input Red (Right) G R A Y Audio Output Red (Right) Orange/White Orange Green/White Brown Blue/Red Lt. Blue Dk. Blue Black Signal Processor Loop (L) (Input) Turn-On “C” (300mA Max) (Output) (Pulsed 500ms) Turn-On “B” (300mA Max) (Output) (.5 sec DELAY ON – FAST OFF) Turn-On “A” (2.0 Amp Max) (Output) (FAST ON – .5 sec DELAY OFF) Battery +12V (Input) Ignition (switched +12V) (Input) Chassis Ground (Input) Yellow Red Power Antenna (300mA Max) (Output) 10A Fuse The External Signal Processor Loop is defaulted to the BYPASS position. To ENABLE the External Signal Processor Loop, remove the bottom cover and adjust the selector switch. Blue/White Signal Processor Loop BYPASS ENABLE E X T E X T Radio Remove Bottom Cover 22-pin harness 10-pin harness External Signal Processor OUT IN Audio Mute (GND to activate) (Input) Ex Audio-2 (GND to activate) (Input) Dimmer In (+12V to activate) (Input) Dimmer Out (External Control) (Output) Signal Processor Loop (R) (Output) Signal Processor Loop (L) (Output) Signal Processor Loop (R) (Input) ® RESET RFX-8140 Instrument Panel Thickness Tabs to Bend A B C D E F G 1.2mm to 2.5mm x x x 2.4mm to 3.5mm x x x 3.6mm to 4.5mm x x 4.6mm to 5.5mm x x x 5.6mm to 7.0mm x x 7.0mm to 12mm x x x 12.0mm to 15mm x x Left Side View Right Side View Top View G G C C C B F A D E E D A F B C FA-1609-A FA-1614-A FA-1613-A

Frontal Extraible con Mando a Distáncia Páginas de Referencia para la Instalación RFX-8140 Amplitud del panel Lengüetas a doblar A B C D E F G 1.2mm to 2.5mm x x x 2.4mm to 3.5mm x x x 3.6mm to 4.5mm x x 4.6mm to 5.5mm x x x 5.6mm to 7.0mm x x 7.0mm to 12mm x x x 12.0mm to 15mm x x Vista lateral desde la Izquierda Vista lateral desde la Derecha Vista en planta G G C C C B F A D E E D A F B C de instrumental 20° 20° ® ® Ext Aud-1 (L–) Ext Aud-1 (L+) 3 4 5 6 7 8 9 10 1 2 DIN (R–) DIN (R+) DIN (L GND) DIN (R GND) DIN (L–) DIN (L+) 10 9 8 7 6 5 4 3 2 1 Conector DIN Balanceado Ext Aud-1 (R–) Ext Aud-1 (R+) + L Señal Tierra Blindaje +R Señal – R Señal – L Señal NC NC 4 3 2 1 8 7 6 5 12 11 10 9 13 1 2 3 4 5 6 7 8 9 10 11 12 13 V E R D E Ext. Aud-1 Entrada Blanco (Izquierda) Salida Balanceada de Audio (Conector DIN de 6 pines) Ext. Aud-1 Entrada Rojo (Derecha) Ext. Aud-1 (L–) Ext. Aud-1 (L+) 3 4 5 6 7 8 9 10 1 2 N/C Derecha (+) Izquierda (–) Derecha (–) N/C Izquierda (+) 10 9 8 7 6 5 4 3 2 1 Ext Aud-1 (R–) Ext Aud-1 (R+) V E R D E Ext. Aud-1 Entrada Blanco (Izquierda) Salida de Audio Blanco (Izquierda) Ext. Aud-1 Entrada Rojo (Derecha) G R I S Salida de Audio Rojo (Derecha) E X T E X T 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 11 Conector de Alimentación N/C Encendido “B” Encendido “A” Encendido “C“ Silenciador de Audio Audio Externo Posterior (L–) Posterior (R–) Frontal (L–) Frontal (R–) Toma de tierra del chasis (Azul/Blanco) (Azul Claro) (Azul/Rojo) (Marrón) (Verde/Blanco) (Verde/Negro) (Viloeta/Negro) (Blanco/Negro) (Gris/Negro) (Negro) N/C Salida de Dimmer Entrada de Dimmer Alimentación +12V N/C Alimentación de la Antena Posterior (L+) Posterior (R+) Frontal (L+) Frontal (R+) Batería +12V (Naranja/Blanco) (Naranja) (Rojo) (Azul Oscuro) (Verde) (Violeta) (Blanco) (Gris) (Amarillo) (Mirando hacia el Conector de la Radio) 12 13 14 15 16 17 18 19 20 21 22 Entrada de la Conexión del Procesador de Señal (L) Entrada de la Conexión del Procesador de Señal (R) Salida de la Conexión del Procesador de Señal (L) Salida de la Conexión del Procesador de Señal (R) Salida de Dimmer (Control Externo) (Salida) Silenciador de Audio (GND para ser activado) (Entrada) Encendido “C” (300mA Máx) (Salida) (Pulsado 500ms) Encendido “B” (300mA Máx) (Salida) (Delay de 0.5 segundos conectado apagado Rápido) Encendido “A” (2.0 Amp Máx) (Salida) (Encendido Rápido Delay de 0.5 segundos desconcectado) Batería +12V (Entrada) Ignition (switched +12V) (Entrada) Toma de tierra del Chasis (Entrada) Entrada de Dimmer (+12V para ser activado) (Entrada) Fusible de 10 Amperios Azul Oscuro Naranja/Blanco Naranja Verde/Blanco Marrón Amarillo Rojo Azul Claro Azul/Rojo Azul/Blanco Negro Encendido “B” = Amplificadore(s) Encendido “A” = Procesador de Señal La conexión del Procesador de Señal Externo, está en posición BYPASS por defecto. Para Activar la conexión del Procesador de Señal Externo, saque la tapa y ajuste el communtador como proceda. Conexión del Procesador de Señal BYPASS ACTIVADO Radio Saque la tapa superior Conector de 22 pines Procesador de Señal Externo SALIDA ENTRADA Antena Ángulos Máximo y Mínimo para montaje Entrada de Antena Cambiador de CD's/ Conector DIN EX Audio-2 (Mirando hacia el Cambiador de CD's) Señal Derechal (+) Común Audio (–) Señal Izquierda (+) Blindaje (Protección) Tierra N/C N/C N/C N/C Battería (+12V) Datos E/C N/C N/C (Mirando hacia el Conector de la Radio) Conector RCA Mando a distancia por Infrarrojos RFX-1110 Pulse el botón R Diamante para el encendido “C” Cambio de batería (2) CR2032 1-6 + – ® (Mirando hacia el Conector de la Radio) Conector de 10 pines Audio Externo (GND para ser activado) (Entrada) Alimentación de la Antena (Máx 300mA (Salida) RESET FA-1609-A FA-1614-A FA-1613-A

Face détachable avec télécommande IR Schéma d’Installation RFX-8140 Epaisseur du tableau de bord Languettes à plier A B C D E F G 1.2mm to 2.5mm x x x 2.4mm to 3.5mm x x x 3.6mm to 4.5mm x x 4.6mm to 5.5mm x x x 5.6mm to 7.0mm x x 7.0mm to 12mm x x x 12.0mm to 15mm x x Vue de gauche Vue de droite Vue du haut G G C C C B F A D E E D A F B C (Orange/Blanc) (Orange) (Rouge) (Jaune) 20° 20° ® ® Aud Ext-1 (G–) Aud Ext-1 (G+) 3 4 5 6 7 8 9 10 1 2 DIN (D–) DIN (D+) DIN (G GND) DIN (D GND) DIN (G–) DIN (G+) 10 9 8 7 6 5 4 3 2 1 Connecteur DIN BLT Aud Ext-1 (D–) Aud Ext-1 (D+) 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Processeur Signal IN (D–) Processeur Signal OUT (D–) Processeur Signal IN (G–) Processeur Signal OUT (G–) Masse chassis N/C Sortie Dimmer Entrée Dimmer Allumage +12V N/C Antenne Electrique (Bleu Foncé) Processeur Signal (D+) Processeur Signal (D+) Processeur Signal IN (G+) Processeur Signal OUT (G+) Batterie +12V Signal +G Blindage Signal +D Signal –D Signal –G NC NC DIN Changeur CD/ Ex Audio-2 DIN (Vue sur le DIN du Changeur) 4 3 2 1 8 7 6 5 12 11 10 9 13 1 2 3 4 5 6 7 8 9 10 11 12 13 N/C N/C N/C N/C Batterie +12V V E R T Entrée Aud. Ext. blanc (G) Sortie Audio BLT (DIN 6 broches) Entrée Aud. Ext. rouge (D) Aud Ext-1 (G–) Aud Ext-1 (G+) 3 4 5 6 7 8 9 10 1 2 N/C Droite (+) Gauche (–) Droite (–) N/C Gauche (+) 10 9 8 7 6 5 4 3 2 1 Aud Ext-1 (D–) Aud Ext-1 (D+) V E R T Ext. Aud-1 Entrée Blanc (G) Ext. Aud-1 Entrée Rouge (D) (Droite) G R I S Boucle Processeur de Signal (G) La Boucle du Processeur de Signal est en position désactivée d'origine. Pour activer la Boucle du Processeur de Signal, enlever le couvercle du fond et ajuster le commutatuer. Boucle Processeur de Signal DESACTIVE ACTIVE E X T E X T Radio Enlever le couvercle du fond Connecteur 22-broches Connecteur 10-broches Processeur de signal externe OUT IN Orange/Blanche Orange Vert/Blanche Brun Jaune Rouge Bleu clair Bleu/Rouge Bleu/Blanche Bleu foncé Noir Télécommande IR RFX-1110 Appuyer sur le bouton rouge “Losange R” pour activer la commande “C.” Batterie de remplacement (2) CR2032 1-6 + – ® Audio Externe (commande négative) (Entrée)) Antenne Electrique (300mA Max) (Sortie) Dimmer (Contrôle externe) (Sortie) Commande “C” (300mA Max) (Sortie) (Impulsion 500mA) Commande “B” (300mA Max) (Sortie) (Délai d'allumage 0,5s – coupure rapide) Commande “A” (2,0A Max) (Sortie) (Allumage rapide – Délai de coupure 0,5s) Batterie +12V (Entrée) +15 Allumage (Entrée) Masse Chassis (Entrée) Fusible 10A Atténuateur audio (mute) – commande négative (Entrée) Dimmer (+12V pour activer) (Entrée) Commande “B” = Amplificateur(s) Commande “A” = Processeur(s) de signal Boucle Processeur de Signal (D) Boucle Processeur de Signal (D) Boucle Processeur de Signal (G) (Vue sur le connecteur de la radio) N/C Commande “B” Commande “A” Commande “C“ Atténuateur audio Audio-2 (Bleu/Blanc) (Bleu clair) (Bleu/Rouge) (Brun) (Vert/Blanc) Cablage HP/Alimentation (Noir) Cablage RCA (Vue sur le connecteur de la radio) Sortie Audio blanc (G) Sortie Audio rouge (D) (Vue sur le connecteur de la radio) Antenne Fiche Antenne Angle de montage maximum et minimum Signal positif droite (+) Commun négatif signal (–) Signal positif gauche (+) Blindage Masse Données E&C N/C N/C RESET FA-1609-A FA-1614-A FA-1613-A

Abnehmbares Bedienteil/IR Fernbedienung Installations Beiblatt RFX-8140 Dicke des Instumenten-Panels Klammern zu biegen A B C D E F G 1.2mm to 2.5mm x x x 2.4mm to 3.5mm x x x 3.6mm to 4.5mm x x 4.6mm to 5.5mm x x x 5.6mm to 7.0mm x x 7.0mm to 12mm x x x 12.0mm to 15mm x x Linke Seitenansicht Rechte Weitenansicht Draufsicht G G C C C B F A D E E D A F B C Antenne 20° 20° ® ® Ext Aud-1 (L–) Ext Aud-1 (L+) 3 4 5 6 7 8 9 10 1 2 DIN (R–) DIN (R+) DIN (L GND) DIN (R GND) DIN (L–) DIN (L+) 10 9 8 7 6 5 4 3 2 1 Balanced DIN Harness Ext Aud-1 (R–) Ext Aud-1 (R+) 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 N/C Einschaltstrom “B” Einschaltstrom “A” Einschaltstrom “C“ Stummschaltung Audio-2 Sig. Processor Loop IN (R–) Sig. Processor Loop OUT (R–) Sig. Processor Loop IN (L–) Sig. Processor Loop OUT (L–) (Blau/Weiβ) (Hellblau) (Blau/Rot) (Braun) (Grün/Weiβ) (Schwarz) N/C Dimmer Ausgang Dimmer In Ignition +12V N/C Motor Antenne Sig. Processor Loop IN (R+) Sig. Processor Loop OUT (R+) Sig. Processor Loop IN (L+) Sig. Processor Loop OUT (L+) Batterie +12V + L Signal Masse- Schirm + R Signal – R Signal – L Signal NC NC 4 3 2 1 8 7 6 5 12 11 10 9 13 1 2 3 4 5 6 7 8 9 10 11 12 13 G R Ü N Bal. Aud. Augang (6-pin DIN) Ext. Aud-1 (L–) Ext. Aud-1 (L+) 3 4 5 6 7 8 9 10 1 2 N/C Rechte (+) Linke (–) Rechte (–) N/C Linke (+) 10 9 8 7 6 5 4 3 2 1 Ext Aud-1 (R–) Ext Aud-1 (R+) G R Ü N Ext. Aud-1 Eingang weiβ (links) Audio Ausgang weiβ (links) Ext. Aud-1 Eingang rot (rechts) G R A U Audio Ausgang rot (rechts) Prozessor Signal-Schleife (L) (Ausgang) Die externe Prozessor Siganl- Schleife (ist Voreingestellt auf Bypass Position) Um die externe Signalschleife einzuschalten, müssen Sie das Bedienteil abnehmen und den Wählschalter umstellen Prozessor Signal-Schleife Bypass eingeschaltet E X T E X T Taste zum Lösen des Bedienteils 22-pin Stecker 10-pin Stecker Externer Signal- prozessor Ausgang Eingang (Blick in den Radio Anschluβ) RCA Adapter Strom Stecker (Blick in den Radio Anschluβ) (Orange/Weiβ) (Orange) (Rot) (Dunkelblau) IR Fernbedienung RFX-1110 Drücke “Diamond R” Taste, um auf “C” Einschaltimpuls zu geben Ersatzbatterien (2) CR2032 1-6 + – ® (Gelb) Karosserie Masse (Blick in den Radio Anschluβ) Orange/Weiβ Orange Grün/Weiβ Braun Gelb Rot Hellblau Stummschaltung (GND zum aktivieren) (Eingang) Einschaltstrom “C” (300mA Max)(Ausgang) (Pulsed 500ms) Einschaltstrom “B” (300mA Max)(Ausgang) (.5 sec Einschaltverzögerung-Schnelles Ausschalten) Batterie +12V (Eingang) Zündung (schaltbar +12V) (Eingang) Karosserie Masse (Eingang) Blau/Rot Blau/Weiβ Motor Antenne (300mA Max) (Ausgang) Dunkelblau 10A Sicherung Schwarz Einschaltstrom “B” = Verstärker(s) Einschaltstrom “A” = Signal Prozessor(s) Dimmer Ausgang (Externe Kontrolle) (Ausgang) Dimmer In (+12V zum aktivieren) (Eingang) Audio (GND zum activieren) (Eingang) Einschaltstrom “A” (2.0 Amp Max) (Ausgang) (Schnelles Einschalten – .5 sec Ausschaltverzögerung) Prozessor Signal-Schleife (R) (Ausgang) Prozessor Signal-Schleife (R) (Eingang) Prozessor Signal-Schleife (L) (Eingang) CD Wechsler/Ex Audio DIN (Blick in den CD Anschluβ) Rechtes Signal (+) Audio gesamt (–) Linkes Signal (+) Abschirmung Masse N/C N/C N/C N/C Batterie +12V E&C Daten N/C N/C Minimaler & Maximaler Einbauwinkel Antenneneigang Ext. Aud-1 Eingang weiβ (links) Ext. Aud-1 Eingang rot (rechts) RESET FA-1609-A FA-1614-A FA-1613-A

Frontalino Estraibile con Telecomando Istruzioni di Installazione RFX-8140 Spessore del pannello Alette da piegare A B C D E F G 1.2mm to 2.5mm x x x 2.4mm to 3.5mm x x x 3.6mm to 4.5mm x x 4.6mm to 5.5mm x x x 5.6mm to 7.0mm x x 7.0mm to 12mm x x x 12.0mm to 15mm x x Vista da sinistra Vista da destra Vista dall’alto G G C C C B F A D E E D A F B C Antenna 20° 20° ® ® Aud est.-1 (L–) Aud est. 1 (L+) 3 4 5 6 7 8 9 10 1 2 DIN (R–) DIN (R+) DIN (L GND) DIN (R GND) DIN (L–) DIN (L+) 10 9 8 7 6 5 4 3 2 1 Cavo DIN bilanciato Aud est.-1 (R–) Aud est.-1 (R+) 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 IN loop del processore (R–) OUT loop del processore (R–) IN loop del processore (L–) OUT loop del processore (L–) N/C Dimmer Out Dimmer In Ignition +12V N/C Pwr. Antenna IN loop del processore (R+) OUT loop del processore (R+) IN loop del processore (L+) OUT loop del processore (L+) +12V batteria (Giallo) + L Segnale Massa Schermo + R Segnale – R Segnale – L Segnale NC NC 4 3 2 1 8 7 6 5 12 11 10 9 13 1 2 3 4 5 6 7 8 9 10 11 12 13 N/C N/C N/C N/C +12V Batteria E&C Data N/C N/C V E R D E Audio est.-1 Ingresso Bianco (sinistro) Bal. Aud. Uscita (6-pin DIN) Audio est.-1 Ingresso Rosso (destro) Aud est.-1 (L–) Audio est.-1 (L+) 3 4 5 6 7 8 9 10 1 2 N/C Destro (+) Sinistro (–) Destro (–) N/C Sinsitro (+) 10 9 8 7 6 5 4 3 2 1 Aud est.-1 (R–) Aud est.-1 (R+) V E R D E Audio est.-1 Ingresso Bianco (Sinistro) Audio Uscita Bianco (Sinistro) Audio est.-1 Ingresso Rosso (Destro) G R I G I O Audio Uscita Rosso (Destro) Loop del processore di segnale (L) (Ingresso) Consenso “C” (300mA Max) (Uscita) (Impulsi 500mSec) Consenso “B” (300mA Max) (Uscita) (Accensione ritardo 0,5 sec, spegnimento immediato) Consenso “A” (2.0 Amp Max) (Uscita) (Accensione immediata, ritardo 0,5 sec spegnimento) Antenna Elettrica (300mA Max) (Uscita) Il loop del processore di segnale é in posizione BYPASS dalla fabbrica. Per abilitare il loop del processore di segnale esterno, togliere il coperchio inferiore e regolare lo switch. Loop del processore di segnale BYPASS ATTIVO E X T Radio Rimuovere il coperchio inferiore Connessione 22 cavi Connessione 10 cavi Processore di segnale esterno USCITA INGRESSO E X T Loop del processore di segnale (R) (Ingresso) Loop del processore di segnale (L) (Uscita) Loop del processore di segnale (R) (Uscita) Uscita dimmer (Controllo esterno) (Uscita) Audio-2 est. (massa per attivare) (Ingresso) Ingresso dimmer (+12V per attivare) (Ingresso) Audio Mute (massa per attivare) (Ingresso) Arancione/Bianco Arancione Verde/Bianco Consenso “B” = Amplificatore Consenso “A” = Processore di Signale +12V batteria (Ingresso) Ignition (switched +12V) (ingresso) Massa del telaio (ingresso) Fusibile 10A Marrone Giallo Rosso Azzurro Blu/Rosso Blu/Bianco Blu scuro Nero Premere il tasto “DIAMOND R” per il consenso “C” Sostituzione batteria (2) CR2032 Telecomando infrarossi RFX-1110 Connettore RCA 1-6 + – ® (Blu/Bianco) (Azzurro) (Blu/Rosso) (Marrone) (Verde/Bianco) (Guardando il connettore della radio) (Guardando il connettore della radio) (Nero) N/C Consenso “B” Consenso “A” Consenso “C“ Audio Mute Esterno Audio Massa del telaio (Arancione/Bianco) (Arancione) (Rosso) (Blu Scuro) (Guardando il connettore della radio) Connettore di alimentazione Angolo minimo e massimo di installazione Ingresso Antenna CD Changer/ DIN Audio-2 Est (Vista del DIN del changer) Signale destro (+) Comune audio (–) Signal sinistro (+) Schermo Massa RESET FA-1609-A FA-1614-A FA-1613-A

Le bande di frequenza del sintonizzatore possono essere programmate per adeguarsi ai diversi sistemi dei paesi (Giappone escluso). 1.Tenere premuto DSPL per 2 secondi 2.Premere il tasto Onda Sinusoidale (Tuner) 3.Premere piú volte SEL per selezionare tra AMERI- CAS, EUR/AUST e SAUDI Nota: per l'Italia selezionare EUR/AUST Weltweiter Tuner Das Frequenzband des Tuners kann programmiert werden, um in den verschiedenen Ländern einwandfrei zu funktionieren (ausgenommen Japan). 1.Drücken und halten Sie DSPL für zwei Sekunden 2.Drücken Sie SINE WAVE (Tuner) 3.Drücken Sie SEL, um zwischen AMERICAS, EUR/ AUST und SAUDI umzuschalten Rockford Fosgate Rockford Corporation 546 South Rockford Drive Tempe, Arizona 85281 U.S.A. In U.S.A., (602) 967-3565 In Europe, Fax (49) 4207-801250 In Japan, Fax (81) 559-79-1265 MAN-1607-A 3/97 DEUTSCH ITALIANO Sintonizador Standard Mundial La banda de frecuencias del sintonizador puede ser programda para ser compatible con los diferentes códigos de los países (excepto Japón) 1.Mantenga pulsado el botón DSPL durante dos segundos 2.Pulse el botón con la onda senoidal (Radio) 3.Pulse SEL para cambiar secuencialmente entre AMERICAS, EUROPA/AUSTRALIA y ARABIA SAUDI ESPAÑOL World Wide Tuner The frequency band on the tuner can be programmed to conform with different country codes (except Japan) 1.Press and hold DSPL for two seconds 2. Press SINE WAVE (Tuner) 3. Press SEL to cycle through AMERICAS, EUR/ AUST and SAUDI ENGLISH FRANÇAIS World Wide Tuner La bande de fréquence peut être programmé pour convenir au codes des différent pays (excepté le Japon). 1.Enfoncez et tenez DSPL enfoncé durant deux secondes 2. Enfoncez SINE WAVE (Tuner) 3. Enfoncez SEL pour parcourir AMERICAS, EUR/ AUST et SAUDI MADE IN MEXICO Designed and Engineered in the USA by Delco Electronics and Rockford Fosgate This product was assembled by Delco Electronics at Deltronicos de Matamoros, Mexico. Due to the global nature of their manufacturing facilities and the electronics parts industry in general, some parts may be manufactured in other countries.