uAvionix EXP Quick Start Manual

uAvionix Brand Logo Specs (REV D) 20160329 = PANTONE P 48-16 C (OR EQUIVALENT) = PANTONE P 179-11 C (OR EQUIVALENT) uAvionix AV-Link EXP Q U I C K S T A R T G U I D E

Size 52.06 x 52.63 x 25.91 mm Weight 32.2 grams Operating temperature range -45°C to +70°C Maximum pressure altitude 35,000ft uAvionix products are warranted to be free from defects in material and workmanship for two years from the installation of tailBeaconX on the aircraft. For the duration of the warranty period, uAvionix, at its sole option, will repair or replace any product which fails in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. Restrictions: This warranty does not apply to cosmetic damage, consumable parts, damage caused by accident, abuse, misuse, fire or flood, theft, damage caused by unauthorized servicing, or product that has been modified or altered. Disclaimer of Warranty: IN NO EVENT, SHALL UAVIONIX BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE OR INABILITY TO USE THE PRODUCT OR FROM DEFECTS IN THE PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

the AV-30 by inserting the unit into the DB-15 connector on the back of the AV-30. Attach AV-Link to AV-30 Using a 3/16” nut driver, tighten the two [2] Jack Screws to 5 in-lbs max. DO NOT overtighten. Using a flat screwdriver, tighten the two [2] screws to 5 in-lbs max. DO NOT overtighten. Tighten Jack Screws (2x) Reattach original back-shell connector 1 1 2 3

Power on the AV-30 after the AV- Link has been installed. Power on the AV-30 Connect a PC to the AV-Link Wi-Fi Network (AV_XXXX). In a Web Browser, navigate to the AV-Link home page via the following URL: 192.168.4.1 At the bottom of the page select AV Firmware Update Connect PC via Wi-Fi Open Web Browser Select AV Firmware Update 1 2 3 4

2 Select Choose File, then select the downloaded AV-30 firmware. Download Firmware: http://uavionix.com/downloads/ service_bulletins/displays/AV-30-E/2.0.3/UAV- 1004037-001-av30e-2_0_3-68867db.bin Choose Update File Once the file has been selected, click Start Update DO NOT power off the unit or close the web browser until the update is complete. The screen on the AV-30 will go black while the device reboots After the reboot, the AV-Link homepage will be displayed. Start the Update AV-30 will Reboot Update Complete Verify Firmware Version 5 6 7 8

By default, AV-Link will automatically identify preferred uAvionix™ ADS-B devices and connect to the nearest device, making the initial use very simple. AV-Link will automatically connect to the nearest: • Sentry • Sentry Mini • SkyEcho • echoUAT • skySensor If a custom ADS-B Receiver is desired, AV-Link can be connected to nearly any GDL90 receiver via the AV-Link Wi-Fi setup page, accessible by a web browser at: 192.168.4.1 Please refer to section 13.5 of the AV-30-E Pilot Guide to configure a custom ADS-B Receiver. Auto Connect Manually Connect

Hold center knob 3 seconds to change screens. Traffic Display is the third screen. Power on the supported ADS-B Receiver

detailed operation instructions. Copyright 2021, All Rights Reserved Go to AV-30-E Pilot Guide uAvionix Brand Logo Specs (REV D) 20160329 uAvionix.com 