Risco ProSYS Plus Quick User Manual
Text of the manual
Quick User Guide
Full (“Away”) Arming
Quick mode:
High Security mode: Code
Quick mode:
.
High security mode:
code or use
Proximity tag
Full Arm all: Security
to apply to all partitions, or
slide a specific partition to the right under
.
Quick mode:
.
High Security mode:
code
Press
Partial (“Stay
code or use Proximity tag
Disarm all: Security
code
press Disarm
to disarm all partitions, or slide a specific
partition to the center under
enter code
Quick mode:
.
High security mode:
code
Disarm all: Press
Partition & Group Disarming
Partition disarming: Code
�
scroll to
Activities menu,
enter Utility
Output number,
.
Note: Must be installer-defined
Quick mode: Press button (1—3) for 2
seconds
High security mode: Press button (1—3)
for 2 seconds code or use Proximity tag.
Note: Must be installer-defined
Quick mode: Press button (1—3)
LED Indicators – Elegant Keypad
Power LED
On: Power OK.
Off: No power
Rapid flash: System trouble.
Slow flash: System is
programming
Ready LED
On: Ready to arm
Off: Not ready to arm
Slow flash: Ready to arm
while entry/exit zone is open
Arm LED
On: System in fully armed mode
Off: System disarmed
Rapid flash: Alarm
Slow
