Task Force Tips YE-RF-900 Instructions For Installation

LIY-410 July 10, 2016 Rev05 WIRELESS MONITOR OPERATOR STATION INSTRUCTIONS FOR INSTALLATION OF RADIO BOARD AND ANTENNA FOR (YE-RF-RAD-##) NOTICE Electrostatic sensitive devices. To prevent damage, use proper grounding techniques. Observe precautions for handling Electrostatic Sensitive Devices. Be sure to touch u ...

LIY-410 July 10, 2016 Rev05 2 STEP 1: Turn off power and remove lid from monitor control box. Unscrew the lid screws using 3mm allen head wrench, but do not removed the screws from the lid. Be careful to open the lid slowly as it is connected to the communication board by a fl at cable. Securely support the lid ...

LIY-410 July 10, 2016 Rev05 3 STEP 7: Plug the radio board to the communication board by aligning pin holes and pushing fi rmly. STEP 8: Attach the antenna connector to the radio board in the orientation shown. NOTE: In some cases, a cable tie may need to be cut to attach the antenna. STEP 9: Reinstall the commu ...

LIY-410 July 10, 2016 Rev05 TASK FORCE TIPS, INC. MADE IN USA • www.tft.com 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 • 219-462-6161 • Fax 219-464-7155 TEACHING ID CODE: NOTE: When the operator station is purchased at the same time as RC monitor, handheld unit will be pre-taught at fa ...