peplink Pepwave AP One AX Installation Recommendations
Read Online
Read the peplink Pepwave AP One AX Installation Recommendations online using the built-in PDF viewer.
Text of the manual
©Peplink. All rights reserved.
AP One AX
Steps:
1. Slide the ceiling mount base into the
slot of the Access Point.
2. Hold the Access Point with one hand to
reach the other hand over the T-Rail
sides of the bracket.
3. Then hook the stationary end of the
ceiling mount bracket onto the T-Rail.
1
3
2
4
©Peplink. All rights reserved.
AP One AX
Steps:
1. Continued from A, determine
where the Access Point to be
placed and mark location on
the surface for the two
mounting holes.
2. Use the appropriate drill bit to
drill two 8.1mm diagram and
26mm depth holes in the
markings and hammer the
bolts into the openings.
3. Screw the anchors unto the
holes until they are flush with
the wall; screw the included
screws into the anchors.
4. Place the Access Point
against wall with the mounting
screw heads.
1
2
