Dynex DX-32L151A11 Quick Setup Manual

box, satellite receiver or game station Using HDMI (best) Using component (better) Connecting an antenna Connect a 75 ohm cable (not included) to ANT/CABLE IN jack on the back of your TV and the RF OUT jack on the antenna. Connecting a home theater system Using analog audio cable: Note: Cable connectors and jacks are often color-coded. Match the colors when you connect the AV cable. Using digital audio cable: Note: The DIGITAL OUTPUT jack only works with digital TV channels. Connecting power Connect the power cable to the AC IN jack on the back of the TV, then connect the other end to a power outlet. Remote control sensor Power indicator Philips PHDVD5, PH5DSS, PMDVR8, PDVR8 115 DirectTV RC23 10463 RCA RCU807 135 One for All URC-6690 0464 Sony RM-VL600 8043 Comcast M1057 0463 Dish Network VIP508, VIP622 720 Motorola DRC800 0463 TIVO Series 3, HD 0091 Universal remote control makers and models Set-top box makers and models Universal remote control TV codes(for all Dynex TVs manufactured after Jan. 1, 2007) Stand column Stand Locating holes Front and side features Installing the stand 1 Remove the stand from the box and place it on a table or bench. 2 Lay the TV flat (screen down) on a flat, cushioned surface. 3 Align the stand with the TV, as shown. 4 Secure the stand to the column with the screws provided Installing a wall-mount bracket 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the four screws holding the TV to its stand column, then remove the stand column. 3 Secure the wall-mount bracket (not included) to the back of your TV using the four M6 screws provided with the bracket. Setting up your remote control 1 While pressing the release button on the battery compartment cover on the back of the remote, lift the cover off the remote. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries align with the + and – symbols in the battery compartment. 3 Replace the cover. To program your existing remote control to work with your Dynex TV, see the table below for common codes. If you have problems programming your remote, or need a different remote control code, visit www.dynexproducts.com for the latest remote control code information. HDMI 1 PC I N C OMPONE NT IN ANT/ C AB LE I N AUDIO O UT P B P R DIG ITA L O UTP UT VG A AUDIO Y AUDIO L R AUDIO L R HDMI 1 PC I N C OMPONE NT IN ANT/ C AB LE I N AUDIO O UT P B P R DIG ITA L O UTPUT VG A AUDIO Y AUDIO L R AUDIO L R 32” and 37" LCD TV QUICK SETUP GUIDE DX-32L151A11/DX-37L130A11 HDMI cable (not included) HDMI device Remote control and 2 AAA batteries Composite video and audio cable AC power cord TV stand and screws Quick Setup Guide Component video device Back of TV Back of TV Audio cable Component video cable HDMI 1 PC I N C OMP ONE NT IN ANT/ C AB LE I N AUDIO O UT P B P R DIG ITA L O UTPUT VG A AUDIO Y AUDIO L R AUDIO L R 75-Ohm coaxial cable HDMI 1 PC I N C OMPONE NT IN ANT/ C AB LE I N AUDIO O UT P B P R DIG ITA L O UTP UT VG A AUDIO Y AUDIO L R AUDIO L R Back of TV Back of TV HDMI 1 PC I N C OMP ONE NT IN ANT/ C AB LE I N AUDIO O UT P B P R DIG ITA L O UTPUT VG A AUDIO Y AUDIO L R AUDIO L R Back of TV Digital optical cable Digital sound system Audio amplifier Power cord Component audio cable (not included) Power outlet C M Y CM MY CY CMY K DX-32L151A11_DX-37L130A11_10-0569_QSG_V1_EN.eps 1 6/1/2010 6:16:53 PM DX-32L151A11_DX-37L130A11_10-0569_QSG_V1_EN.eps 1 6/1/2010 6:16:53 PM

1 Plug in your TV and turn it on. The initial Setup Wizard opens. 2 Press  or  to select the menu language you want, then press ENTER. The Time screen opens. 3 Press  or  to highlight an option and press  or  to change the setting. Options include: • Time Zone-Select your time zone • DST-If your area uses daylight savings time • Mode-Select Manual to set date/time manually or Auto to have them set automatically. • If you select Manual, press  or  to highlight an option, then press  or  to change the setting. 4 When you are done, press ENTER to move to the next screen. The Choose your Picture Mode screen opens. 5 Press  or  to highlight Home Mode (recommended) or Retail Mode. If you selected Home Mode, the Choose your TV source screen opens. 6 Press  or  to highlight Antenna, Cable, or Cable/Satellite Box, then press . If you selected Antenna or Cable, your TV automatically scans for available channels. If you selected Cable/Satellite Box, you are asked to select the correct input source for your set top box. The channel scanning can take up to 30 minutes. 7 Press EXIT to close the menu, then select the input source through the INPUT SOURCE menu. Selecting the video input source 1 Press INPUT, press  or  to highlight a source, then press ENTER. You can also press any of the video source buttons directly. Adjusting the volume • Press VOL+ or VOL- to change the volume. • Press MUTE to turn off the sound. Selecting a channel • To move to a different channel in the channel list, press CH^ or CH ^ . OR • Enter the channel number directly using the number buttons. Viewing channel information • Press INFO to view an information banner. The information banner shows the current program information such as channel number, video input source, and resolution. • Digital mode information—Displays the channel number, station name, channel label, broadcast program name, TV rating, signal type, audio information, resolution, CC mode, current time, and current program start and end times. • Analog mode information—Displays channel number, channel label (if preset), signal type, audio information, and resolution. • Press GUIDE to show the digital program guide, which may view a list of available programs, program times, and program summaries, depending on the information provided by the broadcaster. On-screen menu overview Picture menu AUDIO menu SETUP menu CHANNEL menu Navigating menus with your remote control 09-0xxx MENU Exit Time Closed Caption Menu Settings VGA Settings Input Label Restore Default Audio Only Audio Channel Parental Controls Off Setup Picture Select Move Picture MENU Exit Sound Mode Bass Treble Balance Surround Digital Output Audio Language Setup Channel Custom 57 50 0 AVC Audio Off English RAW Off Select Move One-year limited warranty Visit www.dynexproducts.com for details. Need additional help? See your User Guide! This comprehensive guide includes everything from basic how-to steps to more advanced features. Your User Guide is also available at www.dynexproducts.com. We’re here for you www.dynexproducts.com For customer service, call: 800-305-2204 (U.S./Canada markets) 01 800-926-3020 (Mexico market) Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-3645 Best Buy Imports, S. de R.L. de C.V. Av. Santa Fe 485, Segundo Piso, Colonia Cruz Manca, Programa Parcial de Desarrollo Santa Fe, Delegación Cuajimalpa, Distrito Federal, México 05349 RFC#BBI0802114Q2 © 2010 BBY Solutions, Inc., All Rights Reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. ENGLISH 10-0569 32" and 37" LCD TV I QUICK SETUP GUIDE I DX-32L151A11/DX-37L130A11 Press to move the cursor on the screen or to adjust a selected item. Press to open the on-screen menu. Press to return to the previous menu. Press to select menu options. Press to confirm a selection or to enter a sub-menu. Press to close the menu. Press to change the volume. Press to change the channel. TV AV Component HDMI1 HDMI2 VGA C M Y CM MY CY CMY K DX-32L151A11_DX-37L130A11_10-0569_QSG_V1_EN.eps 2 6/1/2010 6:17:17 PM DX-32L151A11_DX-37L130A11_10-0569_QSG_V1_EN.eps 2 6/1/2010 6:17:17 PM