Mocka Winnie Chair Assembly Instructions
Read Online
Read the Mocka Winnie Chair Assembly Instructions online using the built-in PDF viewer.
Text of the manual
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
F
Large
Screw x2
Phillips screwdriver
For quicker assembly, we recommend the use of a power drill on a low-speed setting.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 1 x Front Leg (K), 1 x Back Leg (J), 1 x Left Frame (L) and 1 x
Right Frame (M) and secure with 12 x Small Bolts (A), 12 x Spring
Washers (C) and 12 x Flat Washers (D). Tighten with an Allen Key (E).
Tighten all of the pre-installed screws with a screwdriver.
Attach 1 x Seat (I) and secure with 3 x Large Bolts (B), 3 x Spring
Washers (C) and 3 x Flat Washers (D). Tighten with an Allen Key (E).
Attach Back Leg (J) to the Seat (I) as shown and secure with 2x Large
Screws (F). Tighten with a Screwdriver.
E
A
A
C
C
D
D
E
E
E
B
B
B
K
K
J
J
C
C
C
D
D
D
F
I
L
M
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Secure 1 x Backrest (H) with 2 x Small Bolts (G), 2 x
Spring Washers (C) and 2 x Flat Washers (D).
Tighten the screws 50%
4
G
H
J
J
H
H
E
C
D
Attach 1x Backrest (H) as shown making sure to click into place.
Then tighten Small Bolts (G) with a screwdriver. You’re done, enjoy!
