Mitsubishi Electric MELSERVO J5 Series Operation & User’s Manual

9.7 [Supported drive modes (Obj. 6502h)] 9.7 [Supported drive modes (Obj. 6502h)] [Supported drive modes (Obj. 6502h: 00h)] Description The supported control mode is returned. The available control modes vary depending on the setting of [Pr. PA01.0 Control mode selection] and the network settings. *1 For servo amplifiers with firmware version earlier than A5, the defined value is "0". *2 For servo amplifiers with firmware version earlier than B0, the defined value is "0". *3 For MR-J5W_-_G servo amplifiers, the defined value is "0". Data Type Access Mapping Default R ...

When exported from Japan, this manual does not require application to the Ministry of Economy, Trade and Industry for service transaction permission. HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN NAGOYA WORKS : 1-14 , YADA-MINAMI 5-CHOME , HIGASHI-KU, NAGOYA , JAPAN ...

6.2 [Alarm history _1 (Obj. 2A01h)] - [Alarm history _15 (Obj. 2A0Fh)] 37 6 [Alarm time (second) (Obj. 2A00h: 04h)] Description The alarm time is returned as a 32-bit integer (time passed from January 1, 1970, 0:00:00.000000000). If time data cannot be obtained from the network, alarm occurrence time shows the cumulative power-on time from January 1, 1970, 0:00:00.000000000. Use this object together with [Alarm time (nanosecond) (Obj. 2A00h: 05h)] according to the system. [Alarm time (nanosecond) (Obj. 2A00h: 05h)] Description The digits after the ones indicating a second in ...