EAW SM15 Specifications

508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 [email protected] www.eaw.com EAW products are continually improved. All specifications are therefore subject to change without notice. SM15/2 pp October 2001 Printed in USA FEATURES PERFORMANCE PHYSICAL • High output, two-way stage-monitor system • 1x 15-in LF, vented • 3-in voice coil/1.4-in exit neodymium HF (40° x 60° coverage pattern) • Angles up 53° Applications include: •Concert Tours •Corporate Events •Major Televised Events •Cathedrals •Large Houses of Worship •Live Music Clubs Frequency Response (Hz) ±3 dB 75 Hz to 17 kHz -10 dB 50 Hz Axial Sensitivity (dB SPL, 1 Watt @ 1m) LF 98 HF 110 Impedance (Ohms) LF 8 HF 8 Power Handling (Watts, Contimuous) LF 800 HF 200 Recommended High-Pass Frequency 24 dB/Octave 50 Hz Calculated Maximum Output (dB SPL) LF Peak 133.0 HF Peak 139.0 LF Long Term 127.0 HF Long term 133.0 Nominal Coverage Angle, -6 dB Points (degrees) Horizontal 40 Vertical 60 LF Subsystem 1x 15-in, vented HF Subsystem 3-in voice coil/1.4-in exit neodymium compression driver on constant directivity horn System Configuration Full range floor monitor Powering Mode Bi-amplified Cabinet Type (shape) Stage monitor Enclosure Materials Baltic birch plywood Finish Wear-resistant textured black paint Connectors 4x Neutrik NL4 Speakon (2 per side) Grille Powder coated perforated steel, foam backed Dimensions Inches Millimeters Height 14.9 377 Width 29.8 756 Depth 17.2 436 Weights Pounds Kilograms Net Weight 73.00 33.20 Shipping Weight 78.00 35.50

DIMENSIONAL DRAWING One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 [email protected] www.eaw.com EAW products are continually improved. All specifications are therefore subject to change without notice. SM15/2 pp October 2001 Printed in USA The two-way full range loudspeaker system shall incorporate a 15-in neodymium LF transducer and a 3-in voice coil/1.4-in exit neodymium compression driver. Powering mode is bi- amplified. The LF driver shall be mounted in a vented enclosure tuned for optimum low frequency response. The HF driver shall be loaded on a constant directivity horn with a nominal coverage pattern of 40° (h) x 60° (v). System frequency response shall vary no more than ±3 dB from 75 Hz to 17 kHz measured on axis. The LF shall produce a Sound Pressure Level (SPL) of 98 dB SPL on axis at 1 meter with a power input of 1 Watt, and the HF shall be capable of producing an output of 110 SPL on axis at 1 meter with a power input of 1 Watt. The LF shall handle 800 Watts of ampli- fier power (continuous) and the HF shall handle 200 Watts of amplifier power. Both shall have a nominal impedance of 8 Ohms. The loudspeaker enclosure shall be irregularly triangular in shape with its baffle angled up 53°. It shall be constructed of multi-ply, void-free cross-grain-laminated Baltic birch ply- wood and shall employ extensive internal bracing. It shall be finished in wear-resistant textured black paint. Input connec- tors shall be 4x Neutrik NL4 Speakon (2 per side). The front of the loudspeaker shall be covered with a powder coated per- forated steel grille backed with open cell foam to protect against dust. The two-way full range loudspeaker shall be the EAW model SM15. S 5 FRONT GRILLE PARTIALLY 29.75 SHOWN BACK 14.85 2X HANDLE SIDES 509070 (A) 3.00 5.28 .73 4.00 2X INPUT R 23.28 6.96 17.18 .59 .59 8.61 2X HANDLE 509070 (A) 8/31/99 Manufacturing tolerances are +/- 0.13 and +/- 1°