EAW JFL118 Declaration Of Conformity

PRODUCT Product Model: JFL118 Loudspeaker p/n 0030529-90 p/n 0032250-90 Description: Loudspeaker Dimensions (h x w x d): 508 mm x 631 mm x 740 mm / 20.0 in x 24.8 in x 29.1 in Material: A513 steel tubing 4140 steel bar stock Supplied Accessories: 3x Connecting Pin p/n 0031196-01 Accessories: Spare Connecting Pin p/n 0031196-01 M10 Eye Bolt p/n 0029818 FB121 Fly Bar p/n 0031170 p/n 0032275 JFL210 Loudspeaker p/n 0029139-90 p/n 0031237-90 COUNTRY OF ORIGIN FOR THE PRODUCT AND COMPONENTS China TECHNICAL SPECIFICATIONS The JFL118 and JFL210 loudspeakers are to be suspended below the FB121 Fly Bar or JFL118 loudspeaker. When used in accordance with the JFL Series Owner’s Manuals the Working Load Limits (WLL) and Design Factor are: Nominal Weight of JFL210 27 kg / 52 lb Nominal Weight of JFL118 44 kg / 97 lb Nominal Weight of FB121 13 kg / 29 lb WLL (for Fly Bar) 264 kg / 582 lb Ultimate Strength Design Factor >10:1 STANDARDS CONFORMITY The JFL118 loudspeakers are designed and intended to be suspended from the FB121 Fly Bar or M10 Eye Bolts in accordance with the JFL Series Owner’s Manual. Up to six (6) JFL118/JFL210 loudspeakers may be vertically suspended in a column below either the FB121 Fly Bar or M10 Eye Bolts. JFL210 loudspeakers must be flown below JFL118 loudspeakers in a mixed array. Two (2) M10 Eye Bolts must be installed in the front PI points of the top loudspeaker of Eye Bolt suspended arrays (Figure 1). For a JFL118 only array, one (1) M10 Eye Bolt may be installed in the rear PI point of the bottom loudspeaker as a pullback point to set the desired array tilt angle (Figure 2). For a mixed array, two (2) M10 Eye Bolts may be installed in the PI points of the bottom JFL210 loudspeaker and bridled together to be used as pullback points to set the desired array tilt angle (Figure 3). Page 1 of 3 October 2008 Eastern Acoustic Works Tel: 800 992 5013 One Main Street e-mail: [email protected] Whitinsville, Ma 01588 www.eaw.com

components or that of the FB121 Fly Bar. For combinations of JFL118 and JFL210, use the following formulas to determine maximum quantities of each. This keeps the total weight of the JFL118/JFL210 combination within the above-specified WLL. Maximum total quantities for suspended configurations using a combination of JFL118 and JFL210 loudspeakers are: Maximum Total Combination Maximum quantity JFL118 = 6 - quantity JFL210 The ultimate strength for the JFL118 loudspeaker was determined utilizing calibrated and certified destructive pull-tests. Page 2 of 3 October 2008 Eastern Acoustic Works Tel: 800 992 5013 One Main Street e-mail: [email protected] Whitinsville, Ma 01588 www.eaw.com

Eastern Acoustic Works Tel: 800 992 5013 One Main Street e-mail: [email protected] Whitinsville, Ma 01588 www.eaw.com Eastern Acoustic Works, as the manufacturer, hereby certifies that, in their delivered versions, The JFL118 loudspeaker complies with the provisions of the directives and standards listed below. European Council Directive on Lifting Accessories, 98/37/EEC European Council Directive on Low Voltage, 73/23/EEC BGV-C1: (German Standard for Lifting Accessories and Audio Rigging) DIN 56950 (German Machinery Installation – Safety) The Technical Report/File is maintained at: LOUD Technologies Inc. Worldwide Headquarters 16220 Wood-Red Road NE Woodinville, WA 98072 USA Tel: +1 425 892 6500 Tel: +1 866 858 5832 Fax: +1 425 487 4337 e-mail: [email protected] Authorized Representative: Kevin Howard Compliance Manager LOUD Technologies Inc. Issued: October, 2008