Omron D4BL - Manual 

Protective Doors Are Locked Until Machine Completely Stops Operation � Automatically locks when the operation key is inserted � Dedicated release lock ensures both easy maintenance and door-unlock at power failure � Tough aluminum die-cast unit incorporating a switch box with IP67 enclosure rating (EN60529, IEC529) � ...

D4BL - - 1 2 1. Conduit 3: 1/2-14NPT 2. Built-in Switch C: 1NC/1NO (Slow-action) + 1NC (Slow-action) D: 2NC (Slow-action) + 1NC (Slow-action) 3. Head Mounting Direction R: Right 4. Door Lock/Release Methods (Dedicated Release Key is Incorporated by All Models) A: Mechanical lock/24-VDC solenoid release B: Mechanic ...

3. General Ratings Rated Voltage Non-inductive Load Inductive Load g Resistive Load Lamp Load Inductive Load Motor Load NC NO NC NO NC NO NC NO 125 VAC 10 A 3 A 1.5 A 10 A 5 A 2.5 A 250 VAC 10 A 2 A 1 A 10 A 3 A 1.5 A 8 VDC 10 A 6 A 3 A 10 A 6 A 14 VDC 10 A 6 A 3 A 10 A 6 A 30 VDC 6 A 4 A 3 A 6 A 4 A 125 VDC 0.8 A 0.2 A 0.2 A 0.8 A 0.2 A 250 VDC 0.4 A 0.1 A ...

Item 24 VDC Models 110 VAC Models 230 VAC Models Rated operating voltage 24 VDC +10%/--15% (100% ED) 110 VAC ±10% (50/60 Hz) 230 VAC ±10% (50/60 Hz) Current consumption Approx. 300 mA Approx. 98 mA Approx. 45 mA Insulation class Class F 130°C (266°F) or less � INDICATOR CHARACTERISTICS Rated voltage 10 to 115 VAC/VDC C ...

Model Contact Contact Form D4BL-�C��-� DPDB-1NC/1NO+ DPDB-1NC 31 32 11 12 24 23 D4BL-�D��-� DPDB-2NC+DPDB-1NC 12 22 11 32 31 21 Internal Circuit LED R ZD R 10 to 115 VAC/DC Recommended Circuit Connection Example 1. Connect the crimp-style terminals of each indicator unit to the internal terminals (terminals 31 and 1 ...

(Example of Electromagnetic Interlock System Operating Mode of D4BL-�C��) Operating mode I II III IV Door The protective door is open. The protective door is closed. The protective door is closed and the machine is operating. The protective door is closed and the solenoid is operating. Door switch Operation Key: The mechanical lock i ...

Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. � SAFETY DOOR SWITCH D4BL-����-� Conduit opening Lock protection cap Cover 7 (0.27) 31 (1.22) 17 (0.67) 37.5 (1.48) 86 (3.39) 16 (0.63) Four, M3.5 head clamp- ing screws Indicators Conduit opening Four, 5.3 (0.21) dia. mounting holes Fo ...

5.3 (0.21) dia. M4 bolt with hexag- onal hole 20 (0.79) 12 (0.47) 40 (1.57) 26 (1.02) 40 (1.57) 80.7 (3.18) 36 (1.42) 5.4 (0.21) 30 (1.18) 34.6 (1.36) 17.5 (0.69) 37.8 (1.49) 19.5 (0.77) 2.5 (0.10) 30 (1.18) 11.6 (0.47) � WITH OPERATION KEY INSERTED R � 250 (side view) 81.5 min 85 max (3.21 min 3.35 max) 30 (1.18) 41 (1.61) 40 (1.57 ...

The following procedure is recommended so that the D4BL can be wired or connected to the Indicator Units with ease. Recommended connecting cable: AWB20 to AWG18 with seven conductors A UL2464-style cable is recommended. Apply sealing tape to the cable and conduit opening so that the D4BL can conform to IP67. Ti ...

whenmountingthe Safety-doorLock Switch. The rangeof space“a” must be determined according to the available set zone 4 mm (0.16 inch) max. of the Operation Key. Stopper Operation key Set zone mark Switch a Refer to Dimensions for the mounting dimensions of the Ope ...