METHVEN Amio Installation Manual

PAIR 01-4804 PAIR 01-3807 Installation Guide Illustration may not reflect actual product shape. www.methven.com Āmio Rere Use of this product in non-domestic applications voids warranty. All pipe work must be thoroughly flushed prior to the installation of the mixer. NEFA inline filters must be installed on both hot and cold supplies. Do not remove the ceramic cartridge from the mixer when installing. Damage caused by hydrostatic testing is not covered by our warranty. IMPORTANT Please read all of the instructions before installation Technical Specifications SPARE PARTS AUG 2010 MA433414 THE METHVEN GUARANTEE The warranty statement shall apply to all tapware & showers supplied by Methven For more information visit www.methven.com THIS WARRANTY ISSUED BY: Methven Australia Pty Ltd, Melbourne Australia We recommend that this product is installed by a licensed plumber. Methven Australia Pty Ltd ABN 15 104 813 390 Melbourne, Australia www.methven.com Inlet Connections: All 1/2’ BSP Operating Pressure: 150kPa - 500kPa Operating Temperatures: Recommended hot water supply 50°C, maximum 70°C. AS 3500 requires all hot water supplies to any sanitary fitting to be tempered to 50°C. Recommended Rough in Set up: Face of finished wall to front of breech (body) 8mm Tolerance : Min: 4mm Max: 12mm Standard Spindle & Handle Assembly Set up Flange Male Adaptor 04-9905 Spindle Only Hot 04-9752 Cold 04-9769 Extended Spindles (Not Included) Hot 04-9707 Cold 04-9714 Flange Male Adaptor 04-9899 Standard Spindle 12mm Extension 04-9837 (Not Included) Grub screws Handle Flange Locking Nut Flange Flange 0-rings Spindle Spindle Flange M & F Extension 04-9875 (Not Included) Spindle as assembled Blue washer = COLD Red washer = HOT STANDARD WALL-TOP ASSEMBLY Adjustment For Handle Line Up. The spindle can be tightened allowing the handle to be adjusted on the spline.

PAIR 01-4804 PAIR 01-3807 Installation Guide Illustration may not reflect actual product shape. www.methven.com Āmio Rere Use of this product in non-domestic applications voids warranty. All pipe work must be thoroughly flushed prior to the installation of the mixer. NEFA inline filters must be installed on both hot and cold supplies. Do not remove the ceramic cartridge from the mixer when installing. Damage caused by hydrostatic testing is not covered by our warranty. IMPORTANT Please read all of the instructions before installation Technical Specifications SPARE PARTS AUG 2010 MA433414 THE METHVEN GUARANTEE The warranty statement shall apply to all tapware & showers supplied by Methven For more information visit www.methven.com THIS WARRANTY ISSUED BY: Methven Australia Pty Ltd, Melbourne Australia We recommend that this product is installed by a licensed plumber. Methven Australia Pty Ltd ABN 15 104 813 390 Melbourne, Australia www.methven.com Inlet Connections: All 1/2’ BSP Operating Pressure: 150kPa - 500kPa Operating Temperatures: Recommended hot water supply 50°C, maximum 70°C. AS 3500 requires all hot water supplies to any sanitary fitting to be tempered to 50°C. Recommended Rough in Set up: Face of finished wall to front of breech (body) 8mm Tolerance : Min: 4mm Max: 12mm Standard Spindle & Handle Assembly Set up Flange Male Adaptor 04-9905 Spindle Only Hot 04-9752 Cold 04-9769 Extended Spindles (Not Included) Hot 04-9707 Cold 04-9714 Flange Male Adaptor 04-9899 Standard Spindle 12mm Extension 04-9837 (Not Included) Grub screws Handle Flange Locking Nut Flange Flange 0-rings Spindle Spindle Flange M & F Extension 04-9875 (Not Included) Spindle as assembled Blue washer = COLD Red washer = HOT STANDARD WALL-TOP ASSEMBLY Adjustment For Handle Line Up. The spindle can be tightened allowing the handle to be adjusted on the spline.