ECS KM400-M2 Manual 

This motherboard has a Socket-462 socket. When choosing a processor, consider the performance requirements of the system. Performance is based on the processor design, the clock speed and system bus frequency of the processor, and the quantity of internal cache memory and external cache memory. 1 Install your CPU. Pull up the lever away from the socket and lift up to 90-degree angle. 2 Locate the CPU cut edge (the corner with the pin hold noticeably missing). Align and insert the CPU correctly. 3 Press the lever down and apply thermal grease on top of the CPU. ...

Front Panel Header The front panel header (PANEL1) provides a standard set of switch and LED headers commonly found on ATX or Micro ATX cases. Refer to the table below for information: Pin Signal Function Pin Signal Function 1 HD_LED_P Hard disk LED+ 2 FP PWR/SLP *MSG LED+ 3 HD_LED_N Hard disk LED- 5 RST_SW_N Reset Switch 7 RST_SW_P Reset Switch 9 RSVD Reserved 4 FP PWR/SLP *MSG LED- 6 PWR_SW_P Power Switch 8 PWR_SW_N Power Switch 10 Key No pin * MSG LED (dual color or single color) ATX1: ATX 20-pin Power Connector Pin Signal Name Pin ...

international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Version 3.0 Disclaimer The information in this document is subject to change without notice. The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. The manufactu ...

Create Array 1 In the VIA RAID BIOS utility main menu, select Create Array then press the key. The main menu items on the upper-left corner of the screen are replaced with create array menu options. RAID 0 for performance 1 Select the second option item Array Mode, then press the key. The RAID system setting pop-up menu appears. 2 Select RAID 0 for performance from the menu and press . From this point, you may choose to auto-configure the RAID array by selecting Auto Setup for Performance or manually configure the RAID array for stripp ...