NISBETS ESSENTIALS DA091 Instruction Manual

Electronic Scales Instruction manual Model: DA091 DA091_EN_A5_v2_20201030.indb 1 DA091_EN_A5_v2_20201030.indb 1 2020/10/30 11:37 2020/10/30 11:37

• Converts between metric and imperial measurements, for both weight and volume • Low battery power / Overload indication • High precision strain gauge sensor • Zero and tare function • Auto off • Increment: 1g/0.1oz • Max. load capacity: 5kg / 11lb • Min. load capacity: 20g To install or replace batteries 1. Remove the battery compartment cover (on the bottom of the appliance). 2. Insert 2 x 1.5V AAA batteries (not supplied), and ensure to follow polarity markings on the battery compartment. Re-locate the battery compartment cover. 3. Position the appliance on a flat stable surface. Note: It is important that the scales are level to ensure accuracy. LCD Screen: Weight unit (kg) Volume unit (ml) Volume unit (fl’oz) Weight unit (lb:oz) Tare Weight Zero weight Negative value Mode Weight mode Milk volume mode Water volume mode Button function MODE Mode conversion Turn on / Turn off / Zero / Tare UNIT Convert unit systems between Metric and imperial (Conversion button on the bottom of the appliance) DA091_EN_A5_v2_20201030.indb 2 DA091_EN_A5_v2_20201030.indb 2 2020/10/30 11:37 2020/10/30 11:37

2. Press MODE button to select desired mode as shown below. To convert weight unit If the scale is with both unit systems of metric (g, ml) and Imperial (lb:oz, fl’oz), press MODE bottom to choose working mode (weight, milk volume, water volume). Then press UNIT conversion button to convert between two systems. Take the conversion of weight unit for example: • When setting “g” as weight unit, the default volume unit is “ml”. • When setting “lb:oz” as weight unit ,the default volume unit is “fl’oz”. To start weighing Weighing mode 1. Place a bowl (if necessary) on the scale. 2. Press to turn on. Wait until LCD shows “O”. 3. Press MODE button to convert to weighing mode. 4. Load weighing object on the scale (or in the bowl) to start weighing. LCD will show the weight reading. 5. If the weighing object is water or milk, press MODE button to choose volume mode and view the volume of weighing object. DA091_EN_A5_v2_20201030.indb 3 DA091_EN_A5_v2_20201030.indb 3 2020/10/30 11:37 2020/10/30 11:37

1. Press to turn on. Wait until LCD shows “O”. 2. Press MODE button to choose “Water” or “Milk” mode. 3. Put a liquid container onto the scale platform. LCD shows the weight of container. 4. Press to zero or tare weight. 5. Pour liquid (water or milk) into the container. LCD shows the volume of the liquid. 6. Press MODE button to choose “Weight” mode and view the weight of liquid. “ZERO” or “TARE” function To weigh different loads consecutively without removing previous loads from the scale: 1. Put first Load on the scale and get weight reading. 2. Press button to reset the reading to “O” before adding next load. You can repeat this operation. Condition 1: “ZERO” function When total sum of all loads on scale is ≤4% of scale’s max. weight capacity (4% here means 200g with this scale), LCD will show “-----” or “0g” each time is pressed. “-----” means reading is not stable. Please wait for a moment. “0g” and meanwhile an icon “O” on the left side of LCD indicate ZERO function is activated. In this case, Max. weight capacity remains unchanged. DA091_EN_A5_v2_20201030.indb 4 DA091_EN_A5_v2_20201030.indb 4 2020/10/30 11:37 2020/10/30 11:37

When total sum of all loads on scale is >4% of scale’s max. weight capacity, LCD will show “-----” or “0g” each time is pressed. “-----” means reading is not stable. Please wait for a moment. “0g” and meanwhile an icon “T” on the left side of LCD indicate TARE function is activated. In this case, Max. Weight capacity is reduced by total weight of all loads. Under this condition: • By pressing , you can see the total weight of all loads on the scale. • To weigh more loads, just press to reset LCD reading to ‘0’ again. Shut off Auto shut-off: Auto shut-off occurs if LCD shows ‘0’ or shows the same weight reading for 2 minutes. Manual shut-off: To maximize battery life, press button continuously to turn off scale after use. Warning indicators Low battery. Replace with new batteries. Scale overloaded. Remove items to avoid damage Cleaning, Care & Maintenance • Clean the case with a damp cloth and warm water. • Remove the batteries if the unit is not to be used for an extended period of time. Compliance Dispose of depleted batteries in accordance with local regulations, within the EC there are nominated disposal points for batteries. The WEEE logo on this product or its documentation indicates that the product must not be disposed of as household waste. To help prevent possible harm to human health and/ or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area. Nisbets Essentials parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities. Nisbets Essentials products have been approved to carry the following symbol: All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Nisbets Essentials. Every effort is made to ensure all details are correct at the time of going to press, however, Nisbets Essentials reserves the right to change specifications without notice. DA091_EN_A5_v2_20201030.indb 5 DA091_EN_A5_v2_20201030.indb 5 2020/10/30 11:37 2020/10/30 11:37

• Conformiteitsverklaring • Déclaration de conformité • Konformitätserklärung • Dichiarazione di conformità • • Declaración de conformidad • Declaração de conformidade Equipment Type • Uitrustingstype • Type d'équipement • Gerätetyp • Tipo di apparecchiatura • Tipo de equipo • Tipo de equipamento Model • Modèle • Modell • Modello • Modelo • Malli Electronic Scales 5 Kg DA091 Application of Territory Legislation & Council Directives(s) Toepassing van Europese Richtlijn(en) • Application de la/des directive(s) du Conseil • Anwendbare EU-Richtlinie(n) • Applicazione delle Direttive • Aplicación de la(s) directiva(s) del consejo • Aplicação de directiva(s) do Conselho Electro-Magnetic Compatibility (EMC) Directive 2014/30/EU - recast of 2004/108/EC EN 55014-1: 2017 EN 55014-2: 2015 Restriction of Hazardous Substances Directive (RoHS) 2015/863 amending Annex II to Directive 2011/65/EU Producer Name • Naam fabrikant • Nom du producteur • Name des Herstellers • Nome del produttore • Nombre del fabricante • Nome do fabricante Nisbets Essentials I, the undersigned, hereby declare that the equipment specified above conforms to the above Territory Legislation, Directive(s) and Standard(s). Ik, de ondergetekende, verklaar hierbij dat de hierboven gespecificeerde uitrusting goedgekeurd is volgens de bovenstaande Richtlijn(en) en Standaard(en). Je soussigné, confirme la conformité de l'équipement cité dans la présente à la / aux Directive(s) et Norme(s) ci-dessus Ich, der/die Unterzeichnende, erkläre hiermit, dass das oben angegebene Gerät der/den oben angeführten Richtlinie(n) und Norm(en) entspricht. Il sottoscritto dichiara che l'apparecchiatura di sopra specificata è conforme alle Direttive e agli Standard sopra riportati. El abajo firmante declara por la presente que el equipo arriba especificado está en conformidad con la(s) directiva(s) y estándar(es) arriba mencionadas. Eu, o abaixo-assinado, declaro que o equipamento anteriormente especificado está em conformidade com a(s) anterior(es) Directiva(s) e Norma(s) Date • Data • Date • Datum • Data • Fecha • Data 23rd October 2020 Signature • Handtekening • Signature • Unterschrift Firma • Firma • Assinatura Full Name • Volledige naam • Nom et prénom • Vollständiger Name • Nome completo • Nombre completo • Nome por extenso Ashley Hooper Eoghan Donnellan Josie Holt Position • Functie • Fonction • Position • Qualifica • Posición • Função Technical & Quality Manager Commercial Manager/ Importer Commercial Manager/ Responsible Supplier Producer Address • Adres fabrikant • Adresse du producteur • Anschrift des Herstellers • Indirizzo del produttore • Dirección del fabricante • Morada do fabricante Fourth Way, Avonmouth, Bristol, BS11 8TB United Kingdom 42 North Point Business Park New Mallow Road Cork Ireland 15 Bagdally Road, Campbelltown NSW 2560 DocuSign Envelope ID: 5F615EAA-1BB3-4AD8-9F4B-BF92FD6A90EC DA091_EN_A5_v2_20201030.indb 6 DA091_EN_A5_v2_20201030.indb 6 2020/10/30 11:37 2020/10/30 11:37

Eire NL 040 – 2628080 FR 01 60 34 28 80 BE-NL 0800-29129 BE-FR 0800-29229 DE 0800 – 1860806 IT N/A ES 901-100 133 PT [email protected] AU 1300 225 960 DA091_EN_A5_v2_20201030.indb 7 DA091_EN_A5_v2_20201030.indb 7 2020/10/30 11:37 2020/10/30 11:37

DA091_EN_A5_v2_20201030 http://www.nisbets.com/ DA091_EN_A5_v2_20201030.indb 8 DA091_EN_A5_v2_20201030.indb 8 2020/10/30 11:37 2020/10/30 11:37