Valcom V-D11025A Installation And Programming Manual

Installation and Programming Manual V1.03 Valcom, Inc. 5614 Hollins Road Roanoke, VA 24019 540-563-2000 P. 540-362-9800 F. www.valcom.com ...

Roanoke, VA 24019 540-563-2000 P. 540-362-9800 F. www.valcom.com Table of Contents V-D11025A/V-D11040A Digital Clocks Table of Contents—2 Flush Mount Installation—3 Flush Mount Installation—4 Surface (Wall) Mount Installation—5 Metal Double Mount Installation—6 Plastic Surface (Wall) Mount Installation—7 Plastic ...

Roanoke, VA 24019 540-563-2000 P. 540-362-9800 F. www.valcom.com 1. Mount the flush mount box into the wall. 2. Connect the ground wire into the flush mount box using the tooth lockwasher and the machine screw nut (included in the kit). 3. Disconnect the red filter from the display panel. 4. Connect the wiring as shown o ...

Roanoke, VA 24019 540-563-2000 P. 540-362-9800 F. www.valcom.com Flush Mount Angled View: Front View: Side View H = 4.65” W = 10.3” Flush Mount Picture 2.5” Figure 1 Front view: Flush Mount Angled View: Front View: Side View Flush Mount Picture 4.0” Figure 2 D3 = .28” D4 = 3.5” H = 4.65” D3 = .28” D4 = 3.5” ...

Roanoke, VA 24019 540-563-2000 P. 540-362-9800 F. www.valcom.com 1. Mount the wall mount box into the double gang box using four machine screws (#6-32) included in the kit. 2. Connect the ground wire into the flush mount box using the tooth lockwasher and machine screw nut (included in the kit). 3. Disconnect the red fil ...

Roanoke, VA 24019 540-563-2000 P. 540-362-9800 F. www.valcom.com 1. Screw hanger/mounting rod (included in the kit) into the crossbar (also included in the kit). 2. Insert wires through hanger/mounting rod. 3. Install crossbar using two (2) #6-32 screws into double gang box. 4. Mount the double mount box into the clock b ...

Roanoke, VA 24019 540-563-2000 P. 540-362-9800 F. www.valcom.com Plastic Surface (Wall) Mount Installation e w q r t y ...

Roanoke, VA 24019 540-563-2000 P. 540-362-9800 F. www.valcom.com q Mount Housing to Wall and/or Gang Box - To mount the housing to the wall, drive two (2) plastic anchors into the wall (not supplied in kit) and take two pan head screws (also not supplied in kit) and drive them into the plastic inserts leaving an 1/8th inch g ...

Roanoke, VA 24019 540-563-2000 P. 540-362-9800 F. www.valcom.com Plastic Double Mount Installation q t i a y r w w e u o ...

Roanoke, VA 24019 540-563-2000 P. 540-362-9800 F. www.valcom.com Plastic Double Mount Installation *For metal mounting bracket: Use a wall anchor that can support 50 lbs or more with a maximum screw size of 10/1.5” q Install metal mounting bracket - First, remove the metal mounting bracket from the inside of the double mo ...