Huawei C5300 Manual 

and let your children know these, so that you can use your phone correctly and safely. For details, see "Warnings and Precautions". Do not switch on the phone when phone use is prohibited. Do not use the phone while driving. Switch off the phone near medical apparatus. Switch off the phone in an aircraft. Switch off the phone near high-precision electronic devices. Do not attempt to disassemble the phone or its accessories. Do not place the phone or its accessories in containers with strong electromagnetic field. Do not place magnetic storage media near the phone. Do not put the phone in a high-temperature place or use it in a place with flammable gas such as a gas station. Do not allow children to use the phone without guidance. Use approved batteries and chargers only to avoid explosion. Observe the laws or regulations on phone use.

All Rights Reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

1 Getting to Know Your Phone .......................................................1 Your Phone ...............................................................................1 Keys and Functions ..................................................................1 Screen Icons..............................................................................3 Interfaces ..................................................................................4 2 Getting Started...............................................................................5 Installing the Battery ................................................................5 Installing the UIM Card............................................................5 Charging the Battery.................................................................5 Powering On/Off the Phone .....................................................6 Using the Function Menu .........................................................6 3 Voice Services.................................................................................8 Making a Call ...........................................................................8 Receiving a Call........................................................................8 Options During a Call...............................................................9 4 Text Entry.....................................................................................10 Text Input Modes....................................................................10 Entering English .....................................................................11 Entering Symbols ...................................................................11 5 Menu Tree ....................................................................................12 6 Writing and Sending a Text Message ........................................13 7 Phonebook ....................................................................................14 Adding a New Contact ...........................................................14 Searching a Contact................................................................14

Activating the Alarm Clock....................................................15 Deactivating the Alarm Clock ................................................15 9 Security .........................................................................................16 Activating/Deactivating the Phone Lock................................16 Changing the Phone Lock Code.............................................16 10 Camera .......................................................................................17 Taking a Photo........................................................................17 Taking Multiple Photos by Just One Press.............................17 Taking a Photo After the Preset Time.....................................17 Viewing a Photo......................................................................18 11 Data Service................................................................................19 Data Modem ...........................................................................19 Setting Fax/Data Rx Mode .....................................................20 Sending a Fax .........................................................................20 Receiving a Fax ......................................................................21 Sending Asynchronous Data...................................................21 Receiving Asynchronous Data ...............................................21 12 Menu Commands.......................................................................22 13 Warnings and Precautions........................................................30

Your Phone OK 1 2 3 4 5 6 7 8 9 0 ABC DEF GHI JKL MNO PQRS TUV WXYZ Key * Number Keys Talk/Send Key Left Soft Key Scroll Key Screen Camera Key Earpiece Right Soft Key End/Power Key # Key OK 1 2 3 4 5 6 7 8 9 0 ABC DEF GHI JKL MNO PQRS TUV WXYZ Key * Number Keys Talk/Send Key Left Soft Key Scroll Key Screen Camera Key Earpiece Right Soft Key End/Power Key # Key Keys and Functions Press… To… � Make a call. � View dialed calls. � Answer an incoming call. � Power on or off the phone (by pressing and holding it for two seconds). � End a call. � Return to the home screen.

� Select the highlighted menu option. � View the phonebook in the standby mode. � Return to the previous menu. OK � Display Menu in the standby mode. � Select an item. � In the standby mode, access: Profiles ( ); Alarm ( ); Scheduler ( ); Messages or Write Message ( ) (by pressing and holding it for two seconds). � During a call, increase volume ( or ); decrease the volume ( or ). � In focusing mode of the camera, zoom in ( ); zoom out ( ); decrease luminance ( ); increase luminance ( ). … Z WXY � Enter numbers and characters. � Select a menu item.

� Display a symbol list in any input mode. � Switch between the meeting profile and the current profile (by pressing and holding it for two seconds). � If the phone is locked, press and to unlock. � Enter the # symbol. � Lock the keypad in the standby mode (by pressing and holding it for two seconds). � Change input modes when editing texts. Activate the camera in the standby mode (by pressing and holding the side key for two seconds). Screen Icons Icon Meaning Indicates the signal strength. The more the bars are, the stronger the signal is. There is an incoming call, a call is being set up, or the phone is in conversation. The keypad is locked. A new message or a voice mail is received. The memory for messages is full. The General profile is activated.

The Silent profile is activated. The Outdoor profile is activated. The Headset profile is activated. The Carkit profile is activated. An alarm clock is set. Indicates the battery power level. The more the bars are, the more power of the battery is left. The battery power level is extremely low. The data service is activated. The vibration mode is activated. Interfaces Interface Function Charger connector/ Data cable connector It is at the bottom of your phone. You can connect the travel charger or data cable to it. Headset jack It is on the upper right side of your phone. You can connect the headset to it.

Installing the Battery 1. b a 2. 3. Installing the UIM Card If the phone is powered on, press and hold for over two seconds to power it off. Then remove the battery. 1. 2. Charging the Battery To charge the battery, do as follows: 1. Connect the travel charger to the charger interface at the bottom of your phone.

During the charging, the icon on the upper right corner of the screen is in an animated status. 3. Wait until the phone is fully charged. If becomes static, the battery is fully charged. 4. Disconnect the charger from the AC power socket. 5. Press the gray buttons on both sides of the charger connector inward to disconnect it from the phone. b a a � Do not use a damaged battery or charger. � Before using the travel charger, ensure that the battery is installed in your phone. Powering On/Off the Phone Press and hold for two seconds to power on/off the phone. Using the Function Menu To use the function menus, do as follows: 1. In the standby mode, press (Menu).

3. Press (Select) to display the selected menu. 4. Display the submenu in either of the ways: � Press to select a submenu and then press (Select) to display the selected submenu. � Press the number key corresponding to the serial number of a submenu to display the submenu. 5. Press (Back) to return to the previous menu or quit the function menu. To return to the standby mode, press .

Making a Call 1. In the standby mode, enter the phone number. � To make an international call, press and hold to enter the international long distance code of “+”. Then enter the number to be dialed, in the format of "country code + region code + phone number". � To call a number with an extension, press to insert “P” or press to insert “T” between the phone number and the extension number. 2. Press to dial this number. 3. Press or (End Call) to end the call. Note In the standby mode, press to select the desired number from Dialed Calls. Then press to dial this number. Receiving a Call When there is an incoming call, you can press or (Answer) to answer it, or press to reject it. � When there is an incoming call, you can press (Silence) to mute the speaker and press (End Call) again to reject it. If the phone is in the silent profile, you can just press (End Call) to reject it. � If the any-key answer function is activated, you can press any key except and to answer an incoming call.

connected to the phone, the incoming call is answered automatically. Note You can set any-key answer function in the Call Settings menu, set the headset auto answer function by selecting Profiles > Headset > Edit > Headset Auto Answer. Options During a Call During a call, you can press or to increase the volume and press or to decrease the volume. Press (Options), and you can select one of the following options: � Save Number: Allows you to enter a new number and save it in phonebook. � Phonebook: Allows you to search or create a contact in phonebook. � Messages: Allows you to access the Messages menu. � Third Party Call: This function depends on network. For more information, consult your service provider. � Speaker on/Speaker off: Allows you to activate or deactivate the phone speaker.

Text Input Modes You can enter English Spanish or Portuguese letters/characters and numbers by using the keypad. While entering text, you can change the input mode by pressing .The following table lists the input modes and their indicators. Indicator Text Input Mode Indicator Text Input Mode eZiEn Smart English es Spanish in lowercase ABC English in upper case ES Spanish in uppercase abc English in lower case SmPt Smart Portuguese 123 Number input mode Por Portuguese in lowercase SmSp Smart Spanish POR Portuguese in uppercase Note � Press (Clear) once to delete the letter on the left of the cursor. Press and hold (Clear) for about two seconds to delete all letters at a time. � In any text input mode, on the upper left corner of the screen displays the current editing status, including the maximum letters for a piece of message and how many letters you can continue to enter.

Alphabetical text input allows you to enter uppercase ("ABC") or lowercase ("abc") English letters. You can press a number key labeled with required letters once to enter the first letter on the key, twice to enter the second letter on the key, and so on. If the letter you want to enter is on the same key as the previous one, you can enter the latter only after the cursor appears again or after you move the cursor to the next space. In the "ABC" or "abc" input mode, you can press once to enter a space, twice to enter "0", and three times to move the cursor to the next line. You can press repeatedly to enter the commonly used punctuations. � Smart English Input The "eZiEn" input mode recognizes commonly used words according to the numeric sequence of key presses and inserts the word into your message. It requires only one key press per letter of the word that you are spelling. If more than one word shares the same numeric sequence, "eZiEn" provides the most commonly used words. Among the possible words, you can press to select the desired one. Entering Symbols In any input mode, press to display a symbol list. You can press to scroll to the desired symbol. Then press the number key labeled with the symbol to enter this symbol.

Call History Phonebook Profiles 1 Missed Calls 2 Received Calls 3 Dialed Calls 4 Call Duration 5 Delete All 1 Search 2 Add New 3 Groups 4 Speed Dials 5 Copy All 6 Delete All 7 My Phone No. 8 Memo Info 1 General 2 Meeting 3 Silent 4 Outdoor 5 Headset 6 Carkit Games Messages Camera 1 Toy Golf 2 Xkid 1 Write Message 2 Inbox 3 Outbox 4 Draft 5 Voice Mail 6 Templates 7 Message Settings 8 Delete All 1 Effect 2 Fun Frame 3 Self Timer 4 Night Mode 5 Go To Gallery 6 Settings Fun&Utilities Gallery Settings 1 Alarm 2 Scheduler 3 Calculator 4 Stopwatch 5 World Clock 1 Pictures 2 Musics 3 Others 4 Sys Info 1 Display 2 Call Settings 3 Phone Settings 4 Security 5 Data Settings

Message 1. Select Menu > Messages > Write Message. You can also access the Write Message menu by pressing and holding for two seconds in the standby mode. 2. Write the message. Select (Options) for one of the following options: � Send: Allows the phone to send the message without saving. � Send&Save: Allows the phone to send the message and save it. If the message is sent successfully, it is saved in the outbox, or it is saved in the draft if it is sent unsuccessfully. � Save: Allows the phone to save the message to the draft. � Insert Template: Allows you to edit the message based on a template. � Insert Phone Number: Allows you to insert the phone number of a contact in the phonebook. 3. While entering the number(s) of the receiver(s), you can select Search > Search Phonebook to select the number(s) of one contact from the phonebook, or select Search > Search Groups to select the number(s) of a group of contacts. 4. Press (Send) to send the message.

1. Select Menu > Phonebook > Add New. 2. Enter the name, and press (OK). 3. Enter the necessary information. � If the memory in use is the phone, you can enter the number in General Number, Mobile Number, Home Number, Office Number and Fax Number (At least one number field should be set.). You can enter the E-mail of the new contact and select a group, a ring and a picture for the contact. � If the memory in use is the UIM card, you can enter the information in General Number. 4. Press (Save) to save the information. The new contact will be saved to the phone. Searching a Contact 1. Select Menu > Phonebook > Search. 2. Enter the name you want to search, and press (OK). 3. Press (View) to view the contact. 4. Press (Options) for one of the following operations: � Edit: Allows you to modify or view the contact. � Delete: Allows you to delete this contact. � Copy To UIM (Copy To Phone): If the contact is saved in phone, choose Copy To UIM to copy it to the UIM card. If the contact is saved in the UIM card, choose Copy To Phone to copy it to the phone. � Send Message: Allows you to write a message. After selecting the number, press (OK). Write a message, press (Options) and select (Send) to send this message.

After the alarm clock is activated, the phone rings and/or vibrates according to the preset mode at the specified time when the phone is powered on. You can set five alarm clocks at most. Activating the Alarm Clock 1. Select Menu > Fun&Utilities > Alarm. 2. Press to select an alarm clock. 3. Select Alarm On to activate the alarm clock. 4. Set the time, and press (OK). 5. Select the alerting mode: � If you select Once, the alarm clock alerts once. � If you select Everyday, the alarm clock alerts once a day. � If you select Custom, the alarm clock alerts at a specified time. Note � When the alarm clock alerts, press any key to stop it (except ) . Alternatively, press (Snooze) to delay it for five minutes, after which the alarm alerts again. � If nothing is done to the alarm clock when it alerts, it stops temporarily and alerts again five minutes later. It alerts for five times before it stops thoroughly. Deactivating the Alarm Clock 1. Select Menu > Fun&Utilities > Alarm. 2. Press to select an alarm clock. 3. Select Alarm Off to deactivate the alarm clock. Note You can select Cancel All to deactivate all alarm clocks.

1. Select Menu > Settings > Security > Phone Lock. 2. Enter the correct phone lock code and press (OK). The default phone lock code is "000000". 3. Select On or Off to activate or deactivate the phone lock. Changing the Phone Lock Code You can change the default or your current phone lock code into any numeric string of 4-8 digits. Do remember your phone lock code. If you forget it, contact your local dealer. 1. Select Menu > Settings > Security > Phone Lock. 2. Enter the correct phone lock code and press (OK). Select Change Code. 3. Enter a new phone lock code and press (OK). 4. Re-enter the new phone lock code and press (OK).

1. Select Menu > Camera. 2. Press OK or to take a photo and save it. 3. Press OK or (Delete) to delete the photo. If the phone is in the multi shot mode, the latest photo is deleted first. Press (Back) to return to the focusing mode for taking a photo. Note While focusing the camera lens on an object, you can press to zoom in; to zoom out; to decrease luminance; to increase luminance. Taking Multiple Photos by Just One Press 1. Select Menu > Camera > Options > Settings > Multi Shot. The function allows the phone to take photos in rapid succession, if activated. You can select 3 or 6 to select the photo number by just one press. You can select Off to deactivate the multi short mode. 2. After focusing the camera lens on an object, press OK or . Then your phone takes multiple photos in a rapid succession and saves them. Taking a Photo After the Preset Time 1. Select Menu > Camera > Options > Self Timer. You can set the countdown time to five seconds or ten seconds. You can also select Off to disable the self timer mode.

. After a preset period, your phone takes a photo and saves it. Viewing a Photo 1. Select Menu > Camera > Options > Go To Gallery. 2. Press to view the photo list. 3. Press (View) to view the photo. 4. During the preview, you can press (Options) to: � Delete: Delete the photo. � Delete All: Delete all photos. � Set As Wallpaper: Set the photo as the wallpaper. � Set As Contact Picture: Set the photo as the contact picture. � Rename: Rename the photo. � File Info: View the type, date, size, width and height of the photo.

Your phone can be used as a high-speed modem if connected to a desktop PC or a laptop, allowing you to enjoy wireless services anywhere at anytime. Data services are network dependent. � If the network prefers voice services and your phone allows call waiting, you can still answer a call when you are using data services. � When you are answering a call, you cannot use data and fax services. � While receiving a fax or data, you can still make a call or go online without being affected by the modified settings in the Fax/Data Rx Mode. For more information, consult your service provider. Data Modem While using data services, you can set the data transmission rate. Check the network supported by your carrier. The steps below describe how to use your phone as a modem: 1. Select Menu > Settings > Data Settings > High Speed 1x Data. 2. Press to select one of the following operations: � On: Use the CDMA2000 1X high-speed data transmission rate. � Off: Use the CDMA95 low-speed data transmission rate. 3. Press (Select) or OK to confirm the selection. 4. Select Menu > Settings > Data Settings > Packet Call Dial Number. 5. Input the dial number provided by the carrier. The number must be the same as the one at the PC side. 6. Press (OK) or OK .

8. Initiate dialing from the PC. The number must be the same as the number from the phone. After obtaining the IP address, you can access your PC to the Internet. Setting Fax/Data Rx Mode 1. Select Menu > Settings > Data Settings > Fax/Data Rx Mode. 2. Press to select one of the following operations: � Off: Disable the phone from receiving any data. The phone regards the next call as a voice call. � Fax Until Next Call: Allows the phone to regard the next call as fax. After the next call, the phone automatically sets Fax/Data Rx Mode back to Off. � Fax Until Power Off: Allows the phone to regard all the incoming calls as fax before power-off. After you power on the phone again, the phone automatically sets Fax/Data Rx Mode back to Off. � Data Until Next Call: Allows the phone to regard the next call as data. After the next call, the phone automatically sets Fax/Data Rx Mode back to Off. � Data Until Power Off: Allows the phone to regard all the incoming calls as data before power-off. After you power on the phone again, the phone automatically sets Fax/Data Rx Mode back to Off. � Press (Select) or OK . Sending a Fax When sending a fax, you need not to set your phone. Make sure that the USB cable between the PC and your phone is well connected. Send the fax from the PC with the fax software loaded.

1. Set the fax receiving mode. For details, see "Setting Fax/Data Rx Mode" on page 20. 2. Run the fax software on the PC. 3. Send pictures from the PC to a remote fax machine, either a PC fax machine or an analog fax machine. 4. The remote fax machine can send faxes to the PC in the same way. Sending Asynchronous Data You need not to set your phone when sending asynchronous data. Make sure that the USB cable between the PC and your phone is well connected. Send the data from the PC with the HyperTerminal software loaded. Receiving Asynchronous Data 1. Set the data receiving mode. For details, see "Setting Fax/Data Rx Mode" on page 20. 2. Run the HyperTerminal software on the PC. 3. Send pictures from the PC to the HyperTerminal at the other end.

Call History Missed Calls Received Calls Dialed Calls Allows you to view, save and delete call records (up to 20), send messages or make calls to the corresponding numbers. Call Duration Allows you to view the duration of the last call, received calls, dialed calls and total calls, or clear the call timers. Delete All Allows you to delete all the missed calls, received calls or dialed calls. Phonebook Search Allows you find a phone number from the phonebook. Add New Allows you to add new contacts to the phonebook. The phone memory can save up to 500 contacts. Groups Allows you to view, rename, delete all members, add members to a group or set group ring. Speed Dials Allows you to make a call by pressing only one number key (except the key labeled with zero) for two seconds in the standby mode. Delete All Allows you to delete all the contacts in the phonebook. Before you delete all the contacts, you should enter correct phone code. My Phone No. Allows you to enter your own phone number.

memory in use (either the phone or the UIM card), if the UIM card is available. Memory Status: Allows you to check all space and the remaining space for contacts in the phone. Profiles General Meeting Silent Outdoor Headset Carkit Allow you to set the alerting mode and other sound/vibration-related features. The General, Outdoor, Headset, and Carkit profiles contain settings for the volume, vibration, ring tone, SMS tone, key tone, alarm clock and power on/off tone. The Headset profile also contains the setting for headset auto answer. The Meeting and Silent profile can only be activated but cannot be edited. Games Toy Golf Xkid Provides games for entertainment. For details, see Help in your phone. Messages Write Message Allows you to write and send a message.

and delivery reports. You can view, reply, delete, and forward the messages in the inbox. You can save the numbers extracted from the messages or make calls by using them. Outbox Allows the phone to store the messages successfully sent, if the auto save function is activated. You can delete, re-send and forward the messages in the outbox. Draft Allows the phone to store draft messages and the messages failed to be sent. You can edit, send, and delete the messages in the draft. Voice Mail Allows you to receive voice mails. You can set the voice mail number and call voice mail center. Templates Allows you to edit up to 10 phrases. Message Settings Group Settings: Allows you to set up to 10 SMS groups, each of which can contain up to 10 contacts. Auto Save: Allows the phone to save the messages successfully sent to the outbox, and save the messages failed to be sent to the draft.

delete the earliest messages automatically to spare room for new messages when the message memory is full. If deactivated, the phone cannot receive new messages when the memory is full. Priority: Allows you to set the priority of messages sent to the receivers. The priorities are Normal, Urgent and Emergency. The message priority function is network dependent. Delivery Ack: Allows you to require a message delivery report from the short message service center (SMSC). Memory In Use: Allows you to set the memory in use (either the phone or the UIM card), if the UIM card is available. Memory Status: Allows you to view the status of memory for messages (both the memory used and the total memory). The phone can save up to 100 messages. Deferred Delivery: Allows you to set the time for deferring the message delivery from the SMSC to the receiver. Four options are available: Immediate, After 12 Hours, After 1 Day, and After 3 Days. Validity Period: Allows you to set the validity period of messages, the time during which messages failed to be sent are saved at SMSC before deleting. Four options are available: Default, After 12 Hours, After 1 Day, and After 3 Days. Delete All Allows you to delete messages in the inbox, outbox, draft, templates, or all messages.

available: Off, Mono, Negative, Sepia, Emboss, Sketch and UV Selection. Fun Frame Allows you to select the frame. You phone provides four frames. Self Timer Allows the phone to take photos automatically after a preset period, if enabled. Three options are available: Off, 5s and 10s. Night Mode Allows the phone to take photos in the night mode, if enabled. Two options are available: On and Off. Go To Gallery Allows you to view a photo, delete a photo, delete all photos, set a photo as the wallpaper, set a photo as the contact picture, rename a photo, or view the type, date, size, width and height of a photo. Settings Resolution: Allows you to select 64*48, 128*96, 128*160, 320*240 or 640*480. Quality: Allows you to select High, Mid and Low. Multi Shot: Allows the phone to take photos in rapid succession. Three options are available: Off, 3 and 6. Timer Reminder: Allows you to enable or disable the timer reminder. Shutter Sound: Allows you to enable or disable the sound when taking photos. Fun & Utilities

specified mode at the preset time, if activated. The phone must be powered on. You can set five alarm clocks at most. Scheduler Allows the phone to store your appointments (up to 20), so that the phone reminds you at the specified time. Calculator Allows you to calculate arithmetic expressions. The calculator supports fractional arithmetic. You can press to select different operators and press to enter a decimal point. You can press (Equals) or OK to perform calculation. Stopwatch Allows the phone to record the time. World Clock Allows you to view the Greenwich Mean Time (GMT) and the current time of other 31 major cities/areas around the world. Gallery Pictures Allows the phone to store pictures in the format of bmp, jpg, png, gif, bci or wbmp. Musics Allows the phone to store music in the format of mid, mp3 or qcp. Others Allows the phone to store other types of files in the formats that are supported in Pictures or Musics. Sys Info Allows you to check the used, free and total space of the phone. Settings

screen and the keypad. Contrast: Allows you to set the screen contrast by pressing the scroll key. Time Format: Allows you to set the time format to a 12 hour clock or a 24 hour clock. Date Format: Allows you to set the date format to DD-MM-YYYY, MM-DD-YYYY, or YYYY-MM-DD. Wallpaper: Allows you to set a picture in the phone as the wallpaper. Banner: Allows you to activate or deactivate the banner. If you select On, you can edit the banner. Menu Style: Allows the phone to display the menu in grids or in a list. Call Settings Call Waiting: Allows you to activate the call waiting service. Consult your service provider for more information about this function. Call Forwarding: Includes options for requesting the network to forward the incoming calls to another number or a voice mail connection. Any-key Answer: Allows you to answer an incoming call by pressing any key except and . Minute Alert: Notifies you of the call duration by giving an alert 10 seconds before the end of each minute, if activated.

including English, Español and Português. Auto Keyguard: Protects the keypad from accidental dialing. When the keypad is locked, you can still press to answer an incoming call or dial emergency numbers. Version: Allows you to view the software version. Security Restrict All Calls: Requests the network to restrict all outgoing calls, if activated after you enter the correct phone code. Phone Lock: Protects the phone from unauthorized use, if activated after you enter the correct phone code. You can also change the default phone lock code (000000) into any numeric string of four to eight digits. PIN Lock: If enabled, protects your UIM card from unauthorized use. You can also change the PIN lock code. Restore Factory Settings: Allows you to restore the phone to the factory settings after you enter the correct phone code. Data Settings High Speed 1x Data: Allows you to use the CDMA2000 1X high-speed data transmission rate or the CDMA95 low-speed data transmission rate. Fax/Data Rx Mode: Allows you to select the fax receiving mode and the data receiving mode. You can disable the phone from receiving any data. Packet Call Dial Number: Allows you to input the dial number.

� Electronic Device Turn off your phone near high-precision electronic devices. The phone may affect the performance of these devices. Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices. If you are using an electronic medical device, consult the device manufacturer to confirm whether the radio wave affects the operation of this device. � Hospital Pay attention to the following points in hospitals or health care facilities: � Do not take your phone into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU). � Do not use your phone at places for medical treatment where phone use is prohibited. � When using your phone near someone who is suffering from a heart disease, turn down the ring tone volume or vibration properly so that it does not affect the person. � Area with Inflammables and Explosives In any area with inflammables and explosives, turn off your phone and do not take out, install or charge the battery, to avoid explosion and fire. Areas with inflammables and explosives include, but are not limited to: � Gas station � Area for storing fuels (such as the bunk under the deck of a ship) � Device/Vehicle for transporting and storing fuels or chemical products

dust, metal powder) in the air � Area with the sign of "Explosives" � Area with the sign of "Turn off bi-direction wireless equipment" � Area where it is generally suggested to stop the engine or a vehicle � Traffic Safety � Please observe local laws and regulations on phone use. Do not use your phone while driving to avoid traffic accident. � Secure the phone on its holder. Do not place the phone on the seat or other places where it can get loose in a sudden stop or collision. � Use the phone after the vehicle stops at a safe place. � If your phone supports the hands-free function, or the phone can be used with earphones, or there is any vehicle-mounted equipment with hands-free function, use them in emergency. � Do not place the phone over the air bag or in the air bag outspread area. Otherwise, the phone may hurt you owing to the strong force when the air bag inflates. � Observe the rules and regulations of airline companies. When boarding or approaching a plane, turn off the phone and take out the battery. In areas where phone use is prohibited, turn off the phone. Otherwise, the radio signal of the phone may disturb the plane control signals. Turn off your phone before boarding an aircraft. � Storage Environment � Do not place magnetic storage media such as magnetic cards and floppy disks near the phone. Radiation from the phone may erase the information stored on them. � Do not put your phone, battery, or other accessories in containers with strong magnetic field, such as an induction cooker and a

occur. � Do not leave your phone, battery, or charger in a very hot or cold place. Otherwise, malfunction of the products, fire, or explosion may occur. � Do not place sharp metal objects such as pins near the earpiece. The earpiece may attract these objects and hurt you when you are using the phone. � Do not subject your phone, battery, and charger to serious collision or shock. Otherwise, battery leakage, phone malfunction, overheat, fire, or explosion may occur. � Do not put your phone in the back pocket of your trousers or skirt, to avoid phone damage while seated. � Children Safety � Put your phone, battery, and charger in places beyond the reach of children. Do not allow children to use the phone, battery, or charger without guidance. � Do not allow children to put the battery in mouth, for electrolyte in the battery is poisonous. � Do not allow children to touch the small fittings. Otherwise, suffocation or gullet jam can be caused if children swallow the small fittings. � Operating Environment � The phone, battery, and charger are not water-resistant. Keep them dry. Protect the phone, battery and charge from water or vapor. Do not touch the phone with a wet hand. Otherwise, short-circuit and malfunction of the product or electric shock may occur. � Do not use the phone in dusty, damp and dirty places or places with magnetic field. Otherwise, malfunction of the circuit may occur.

negative impact on your health. � If you feel uncomfortable (such as falling sick or qualm) after playing games on your phone for a long time, please go to see a doctor immediately. � On a thunder stormy day, do not use your phone outdoors or when it is being charged. � The phone may interfere with nearby TV sets, radios and PCs. � In accordance with international standards for radio frequency and radiation, use phone accessories approved by the manufacturer only. � Cleaning and Maintenance � Before you clean or maintain the phone, turn off the phone and disconnect it from the charger. Otherwise, electric shock or short-circuit of the battery or charger may occur. � Do not use any chemical detergent, powder, or other chemical agent (such as alcohol and benzene) to clean the phone and the charge. Otherwise, part damage or a fire can be caused. You can clean the phone and the charger with a piece of soft antistatic cloth that is a little wet. � Do not scratch the shell of the phone. Otherwise, the shed coating may cause skin allergy. Once it happens, stop using the phone at once and go to see a doctor. � Keep the plug dry when you clean it, to prevent fire. � If the phone or any of its fittings does not work, turn to the local authorized service center for help. � Environmental Protection � Please observe the local regulations regarding the disposal of your packaging materials, exhausted battery and old phone and please promote their recycling. Do not dispose of exhausted battery or old phone in municipal waste.

restriction of the use of certain hazardous substances in electrical and electronic equipment. � Emergency Call You can use your phone for emergency calls. However, connections in all conditions cannot be guaranteed. You should never rely solely on the phone for essential communications. � Battery � Use the battery approved by the manufacturer only. Otherwise, explosion may occur. � Do not dispose of the battery in fire. Otherwise, the battery may ignite or explode. � Do not connect two poles of the battery with conductors such as cables, jewelries or any other metal material. Otherwise, the battery is short-circuited and it may burn your body. � Do not disassemble the battery or solder the battery poles. Otherwise fluid leakage, overheat, fire, or explosion may occur. � If there is battery leakage, smoke, or strange smell, stop using the battery and keep it away from open flame to avoid fire or explosion. Then turn to an authorized maintenance engineer for help. � If the battery fluid contacts your skin or cloth, wash with clean water immediately to avoid irritation to the skin. � If the battery fluid gets into eyes, do not rub your eyes. Otherwise, your eyes can be hurt. Wash with clean water and go to see a doctor immediately. � If there is battery deformation, color change or abnormal heating while you charge or store the battery, take it out immediately and stop using it. Otherwise, battery leakage, overheat, explosion, or fire may occur. � When installing the battery, do not push the battery by force lest battery fluid leak out or the battery crack.

� If you do not use the battery for a long time, store it in normal temperature after charging. � Charger � Use the charger approved by the phone manufacturer only. Any violation of this rule may result in fire or malfunction of the charger. � Do not short-circuit the charger. Short-circuiting the charger may cause fire or malfunction of the charger. � If the power cord is damaged (for example, the lead is exposed or broken), or the plug becomes loose, stop using the power cord at once. Otherwise, electric shock, short-circuit of the charger, or fire may occur. � Keep the charger dry. Once water or other liquid leaks into the charger, electrical leakage or other faults may occur. � Do not use the charger in a dusty and damp environment. � Keep the power cord away from any heating appliance. � Ensure the charger is properly plugged into the power socket properly when charging the battery. Improper insertion may result in electric shock, fire, or explosion. To unplug the charger, pull the plug off rather than tear off the power cord. � Use the AC power supply defined in the specifications of the charger. An improper power voltage can cause fire or malfunction of the charger. � Do not place any heavy object on the power cord of the charger. Do not damage, change, or pluck the power cord. Otherwise electric shock or fire may occur. � When you are charging the battery with the charger, do not touch the plug, power cord or the charger with a wet hand. Otherwise, electric shock can be caused.

plug of the charger from the socket immediately. Otherwise, overheating, fire and other malfunction may occur. � Certification Information (SAR) THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELD. Your mobile phone is a low-power radio transmitter and receiver. When it is turned on, it emits low levels of radio frequency energy (also known as radio waves or radio frequency fields). Governments around the world have adopted comprehensive international safety guidelines, developed by scientific organizations, e.g. ICNIRP (International Commission on Non-Ionizing Radiation Protection) and IEEE (Institute of Electrical and Electronics Engineers Inc.), through periodic and thorough evaluation of scientific studies. These guidelines establish permitted levels of radio wave exposure for the general population. The levels include a safety margin designed to assure the safety of all persons, regardless of age and health, and to account for any variations in measurements. Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a mobile phone. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level of the mobile phone while operating can be well below the value. This is because the mobile phone is designed to use the minimum power required to reach the network. All models of Huawei’s mobile phone are designed to meet radio frequency exposure guidelines. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (that is, at the ear and worn on the body) as required by the FCC for each model. For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when the handset

that contains no metal part. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the FCC and IC for this device type when tested for use at the ear is 1.02 W/kg, and when properly worn on the body is 0.576 W/kg. Ver:V100R001C16_01 BOM: 31017112