NCR Encrypted MSR Instructions Manual

NCR is a registered trademark of NCR Corporation. NCR RealPOS is a trademark of NCR Corporation in the United States and/or other countries. Other product names mentioned in this publication may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is permitted under the terms and conditions of an agreement you have with NCR, NCR's copyright notice must be included. It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware become available. NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current. To maintain the quality of our publications, we need your comments on the accuracy, clarity, organization, and value of this book. Please use the link below to send your comments. EMail: [email protected] Copyright © 2017–2021 By NCR Corporation Global Headquarters 864 Spring St NW Atlanta, GA 30308 U.S.A. All Rights Reserved Revision Record Issue Date Remarks A Feb 2017 First Issue

Kit Content

7613/5915 Installation Procedure 1. Remove the MSR blank plate. a. Detach the bottom side first using a flat screwdriver. b. Unlatch the top side of the blank plate. 2. Connect the MSR cable connector to the USB extension cable of the display.

3 3. Gently push the excess cables into Port A recess. 4. Hook the Encrypted MSR to the Back Housing and snap into place.