marsden M-950 Operating Manual

Specification ............................................................................................................ 2 Preperation for equipment……………………………………………………………….3 DP-3810 Indicator……………………………………………………………………………..6 Power Supply…………………………………………………………………………………….6 Panel…………………………………………………………………………………………………7 Key Functions……………………………………………………………………………………7 LCD Symbol Description……………………………………………………………………8 Date & time setting procedure…………………………………………………………9 Normal weighing procedure (patient on bed) ....................................... 100 How to use BMI feature .................................................................................. 111 How to use tare function ............................................................................... 122 How to use pre-set tare function ................................................................ 133 Set up your device ............................................................................................ 144 Printing function .................................................................................................. 15 Error message .................................................................................................... 177 Instruction of replacing battery pack……………………………………………..18

Accuracy ±300g Weight Unit 0.2kg / 0.5kg LCD Display 1.0 inch LCD display with 5 and 1/2 digits Dimension Weighing Area- 92 X 3.5 X12.5 cm Key Functions ON/OFF, ZERO, TARE, BMI, UNIT, HOLD, PRINT, 0-9 Power Supply  Rechargeable battery pack(7.2V 2000mA)  12V 2A switching adaptor Operation Temperature 5℃ ~ 35℃

1. Using the handle of weigh beam 2. Place weigh beams under bed next to the bed casters. 3. Set the unit on a stable, level surface. When the bubble indicator is in the centre of the circle, M-950 is leveled correctly. Bubble indicator: Good Wrong All four feet must touch the surface to make sure that M-950 does not rock.

coded cables. 5. Switch scale on, check at zero and push bed forward and onto the weigh beams.  We strongly recommend two people to operate the procedure.

on the scale!! You must make sure that the connecting cable is not caught under the measuring foot, otherwise faulty measurements may result. 6. Four bed casters are now placed well on weighing pads.

indicator, or, plug the connector of AC ADAPTER (12V 2A) in the indicator. 2. Plug the cable to the printer, and then connect its 9D connector to the indicator. POWER SUPPLY  The INDICATOR uses a rechargeable battery pack, or an AC adaptor.  When the indicator displays (low battery indication), please plug in the AC adaptor for operation and rechargeable batteries (where rechargeable batteries are installed) – for at least 4.5 hours if batteries are fully charged. The battery should be recharged at least every 3 months regardless if it is used or not. After a long period in storage, e.g. over 3 months, the battery should run a full cycle (charge/discharge) to allow it to restore to full capacity.

PRINT Data transmission via interface BMI Determination of Body Mass Index HOLD Hold function / determination of stable weighing value ZERO The scale is reset to 0.0kg display. It is possible to set max. up to 2% of maximal load for verified scales, and 2% or 100% of maximal load for common scales (possibility of selection in the menu) TARE Taring the scale UNIT Press this key to select weight units (kg and lb). NOTE: only “kg” unit can be used in approval mode. 0-9 Entering digits

Definitions Stable symbol: To indicate that the weight is stable. Minor weight: Weight under zero. Zero symbols: Weight is at zero point. Power Index: When the indicator show “LO” is means Battery need to charge.

Press HOLD key 3 sec into the TIME SETTING mode, beginning with the top row, in the flashing space. Press HOLD to change flashing space. EX: To input Dec 25, 2008, 8:00am Enter year. Press HOLD to change flashing space. Enter date. Ex: 12/25 enter “12.25” Press HOLD to change flashing space. Enter time. Display show YYYY→MM.DD→TT:SS

the bed) Turn On the scale using ON/OFF key. **(before moving bed on the weigh bridge) Setting the PRE-TARE value (bed weight), scale will automatically perform Tare function and the minus (-) sign will appear in front of Pre-Tare value. Setting Pre-Tare Function please refer “HOW TO USE PRE-TARE FUNCTION” (page.14) Place both the weigh bridges under the bed and push the bed on the scale. The upper display will show the net weight of the patient. Now if you want BMI also, simply long press BMI key, the middle display will show the last height of the patient and extreme digit will blink. Key in the height measurement of patient using 0~9 key and press ENTER key. The third display will show the BMI of the patient To print out the weighing result, press PRINT key.

Use the instrument to calculate your BMI and understand your body condition. Please follow below procedure: In normal mode, press BMI key to enter into BMI mode. The display will show last height and the extreme left of figure will flicker. Enter the height by number key. (ex:170cm) Proceed to weigh as normal. The instrument will show the weight, height, and BMI value. At this time, the weight and height can be freely changed, and the BMI value will automatically calculated according to the changed weight and height. Presses HOLD key to lock the weight, height, and BMI value. Press HOLD key again to disable the lock function. Press BMI button to return normal mode and the person can now take off the scale.

In normal mode, place a target which you want to tare its weight (like clothes) on the scale platform. Press TARE to tare the weight of target. LCD will return to zero. Then client stand on the scale and weigh. The result shown is the net weight of client. The weight of his clothes has been tared at step 3. Disable the TARE function or setting tare range (50% or 100%)

Press ON/OFF to switch on device. Press TARE key 3sec to enable this function. The LCD shows 0.0kg and the Pre-tare arrow is flashing for input target’s weight. Input the weight that you wish to deduct. Ex: 0.2kg. Press to finish input. Now you have 0.2kg as your deduction. Weigh 60.2kg and get 60kg as a net weight. For multi-interval model, the pre-tare range only possible to set to 50% of full capacity or equal to Max. 1.

When the scale is switched on, hold the [ZERO] key pressed for about 3 seconds until the display shows successively the „SETUP” and „A.OFF” symbols. AUTO-OFF TIME SETUP This enables operator to setup period to shut off device with no operation automatically. BUZZER ON/OFF SETUP This enables operator to setup ON/OFF to the buzzer. When the „End” is selected, the setting can be finished with the [HOLD] key.

RS232 interface cable (included in accessory kit). After weighing and calculating BMI simply press PRINT key to print out the results. The format presented below is the standard format of results print- out and cannot be changed. Parameters of RS232 interface Set parameters of the scale interface on the connected device. It is not possible to change the scale parameters.  Baud rate: 9600 bps  Parity check: None  Data length: 8 bits  Stop bit: 1 bit  Handshake: RTS/CTS  Data code: ASCII

Connecting with PC 1. Start Hyper Terminal Start Hyper Terminal program from clicking Start Menu → Programs → Accessories → Communication → Hyper Terminal. 2. New Connection Description Give new connection a name then click OK. 3. Select Your COM Port Click Connect to select your COM port. Usually there’s only one option for select. Then click OK. 4. Port Settings Click Bits per second to set up rate at 9600, Data bits at 8, Parity at None, Stop bits at 1 and Flow control at Hardware. Then click OK to complete your setting. 5. Output Data When the patient has been weighed and BMI calculated, simply press the PRINT key to output data from scale to PC or an Optional Printer.

1. Open the battery door. 2. Disconnect the rechargeable battery pack then replace it. 3. Push the female and male connectors together.

cable connector above the battery pack. 5. Replace and close the battery door.

the manufacture of specified types of electrical equipment.  The product does not contain any of the restricted substances in concentrations and applications banned by the directive;  and for components, the product is capable of being worked on at higher temperatures required by lead-free soldering. The restricted substances and maximum allowed concentrations in the homogenous material are, by weight: Substance Concentration Lead 0.1% Mercury 0.1% PBB (Polybrominated Biphenyls) 0.1% PBDE (Polybrominated Diphenyl Ethers) 0.1% Hexavalant Chromium 0.1% Cadmium 0.01% PRODUCT CONFORMITY Harmonised Standards to Which Conformity is Declared – EN60601-1-2 / EN60601-1 93/42/EEC – Medical Devices Directive 2014/31/EU – Non Automatic Weighing Instrument Directive