marsden BAS-200 Operation & User’s Manual

instructions before starting to use the scales Page 1

 Environmental humidity: <80%  Max capacity: 20kg  Graduation: 5g  Power supply: 4 x AA batteries  Background colour: Blue backlight  Low power: Lo  Error of indication: Err  Unit change: kg or lb  Memory function: Optionally save and recall weighing value  Turn off automatically  Overload: o_Ld Keys’ Function ON/TARE Press the key to power on the scale. To zero the scale, press the key again to clear the display and “zero” icon will show in the left corner of the LCD. To turn off the scales press and hold the key for about 3 seconds. MODE Weighing units exchange key. Press the key to select kg and lb in turn. An icon denoting kg or lb is on the right side of the LCD display. MEM When the display “0.000”, press the key to recall the previous weight saved in the memory. A weight is saved by pressing the key when it is stable. Operation  Press “ON/TARE” key to start the scale until “0.000” appears.  Place baby on the tray, the weight will flash after a few seconds. If the baby remains on the tray after the weight is shown, the weight will continue to flash for 5 minutes and then turn off automatically.  If the baby is removed from the tray immediately after the weight has flashed, the scale will return to “0.000” and then turn off automatically within 5 minutes if not used again.  To recall the saved weight, press the “MEM” key while the scale is in the “0.000” position. Page 2

 Replace batteries immediately when the scale displays “L o”  Keep the scale clean  Remove the batteries if the scale is not going to be used for a long period.  Weigh the baby in the centre of the tray.  Never overload the scale (23kg) Page 3