Magtek DynaPro Go Quick Installation Manual
Text of the manual
Registered to ISO 9001:2015 © Copyright 2019 MagTek, Inc. PN D998200135 rev rev 60 3/19
DynaPro Go
Handheld PIN Pad Device with
MSR/Contact/Contactless
Quick Installation Guide
Installing DynaPro Go: Configuration is done prior to deployment for the certificate authority public
keys and terminal and payment brand settings; end users need only set up a ho
Registered to ISO 9001:2015 © Copyright 2019 MagTek, Inc. PN D998200135 rev 60 3/19
Charging the Device
DynaPro Go’s power comes from an on-board rechargeable battery when it is not connected to a
host’s USB port. The battery must be periodically recharged by connecting it to a charging cradle, a
USB port, or a stand-alone USB charger. Charging the de
Registered to ISO 9001:2015 © Copyright 2019 MagTek, Inc. PN D998200135 rev rev 60 3/19
On and Off
To power on the device: Press and hold the Power button for one second. Upon powering up, it will
display the “Welcome” screen and the current device status.
To power off the device: Press and hold the Power button for seven seconds, or press the Power
b
Registered to ISO 9001:2015 © Copyright 2019 MagTek, Inc. PN D998200135 rev 60 3/19
Compliance
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including
interference that
