KERN EOB-A01 Assembly Instructions

Assembly instructions Tripod Contents 1 Technical data ......................................................................................................... 2 2 Scope of delivery .................................................................................................... 3 3 Assembly EOB-A01 ................................................................................................. 3 3.1 Assemble the tripod to the balance ................................................................................. 3 3.2 Assemble the display unit to the tripod ........................................................................... 4 4 Assembly EOB-A01N .............................................................................................. 4 4.1 Assemble the tripod to the balance ................................................................................. 4 4.2 Assemble the display unit to the tripod ........................................................................... 5 EOB-A01 EOB-A01N Suitable only for medical balances with platform size up to 310 x 300 mm. Only suitable for non–medical balances with platform size up to 310 x 300 mm. 1 Technical data KERN EOB-A01 EOB-A01N Net weight 1150 g 1645 g Tripod height 450 mm 450 mm

EOB-A01 EOB-A01N 1. Tripod 2. Fastening screws 3. Turning knobs for assembly display unit 4. Support screw 1. Tripod 2. Fastening screws 3. Turning knobs for assembly display unit 4. Support screw (already assembled) 5. Rubber cover 3 Assembly EOB-A01 3.1 Assemble the tripod to the balance Example: (Figure approximately) Fasten the tripod acc. to illustration with the 4 screws on the lower side of the platform. Observe that during screwing down not too much pressure is performed on the weighing pan.