Lascar Electronics El-Lite Manual 

Specifications

Brand: Lascar Electronics
Category: Data Loggers
Model: El-Lite (Manual )
File Type: PDF
File Size: —
Pages: 8

Read Online

Read the Lascar Electronics El-Lite Manual  online using the built-in PDF viewer.

Text of the manual

LASCAR ELECTRONICS, INC.

PO BOX 8204, SAVANNAH, GA 31412 TEL: +1 (912) 234 2048 FAX: +1 (912) 234 2049 E-MAIL: [email protected] LASCAR ELECTRONICS LIMITED, MODULE HOUSE, WHITEPARISH, SALISBURY, WILTSHIRE SP5 2SJ UK TEL: +44 (0)1794 884567 FAX: +44 (0)1794 884616 E-MAIL: [email protected] www.lascarelectronics.com 1 WINDOWS Compatible Data Logger  WINDOWS Kompatibler Datenlogger Registratore di dati WINDOWS compatibile Collecteur de Données Compatible WINDOWS TM

EL-Lite offers a simple solution for measuring, displaying and recording temperature. The module

has a memory capacity of up to 8064 readings, and a battery life of up to 3 years.* EL-Lite can be easily programmed and its data transferred via the integral communications connector. EL-Lite can operate as a "stand-alone" logger or may be permanently connected to a system. Application examples include "Due Diligence" monitoring of refrigeration temperature, utilities use and environmental monitoring. The PC software, EL-WIN-Lite, operates under Windows 3.1 and does not require specialist skill to operate. Data output is in text format and can be easily integrated into any popular spreadsheet. Graphical output is possible using the same software package. Consult the EL-WIN-Lite software manual for further details. • On-Board Temperature Sensor • Easy to Use • Battery Powered • Protection Against Environment • Non-volatile Data Storage Windows 3.1 Control Software USING EXTERNAL SIGNALS BATTERY REPLACEMENT  Stock Number - EL-WIN-Lite. PIN FUNCTIONS DO NOT APPLY AN EXTERNAL SUPPLY VOLTAGE ACROSS THESE PINS WITH BATTERY IN PLACE. Only connect outputs to high impedance inputs, otherwise performance will be affected and battery life drastically reduced. WARNING: Handle lithium batteries carefully - observe warnings on battery casing. Dispose of in accordance with local regulations. 1. SW 'Push to record event' input. Connected via a push switch to V-. 2. RS Reset input. Connect to V- to reset logger. 3. HA High Alarm output = V+ when alarmed. 4. LA Low Alarm output = V+ when alarmed. 5. V+ Battery positive. 6. V- Battery negative. 7. TXD Transmit Data output. Connect to computer receive input. 8. RXD Receive Data input. Connect to computer transmit output. Only use ½AA 3.6V lithium. The list below is not exhaustive. Check with supplier that the battery you are ordering is 'press fit' and is not fitted with solder tags. Take care to connect correctly. DO NOT PRESS ON LCD WHEN INSERTING BATTERY. MAXELL ER 3S TC n/a SAFT LS3 n/a SONNENSCHEIN SL-750/S 1107 501 100 TADIRAN ½AA/S 1551-02-210-000 Easy to install and use, the control software will allow the user to set up the EasyLog-Lite module, download the stored data and graph the results. Supplied on 31/2" disk, together with software manual and communications cable. EL-WIN-Lite will run under Windows 95. Manufacturer Part Number Manufacturer's Order Code

L'EL-Lite offre une solution simple pour mesurer, afficher et enregistrer la température. Le module

a une capacité de mémoire pouvant aller jusqu'à 8064 lectures et une autonomie pouvant atteindre 3 ans.* L'EL-Lite peut être facilement programmé et ses données transférées via le connecteur de liaison intégré. L'EL-Lite peut s'utiliser comme collecteur «autonome» ou peut être connecté de façon permanente à un système. Il peut notamment être utilisé pour le contrôle «normal» de la température de réfrigération, l'utilisation des utilités et le contrôle de l'environnement. Le logiciel PC, l'EL-WIN-Lite, fonctionne sous Windows 3.1 et ne demande aucune connaissance particulière. La sortie des données se fait en format texte et celles-ci peuvent être facilement intégrées dans les tableurs les plus courants. Une sortie graphique est également possible en utilisant le même logiciel. Reportez-vous au manuel du logiciel EL-WIN-Lite pour de plus amples détails. Capteur de température embarqué Protection contre l'environnement • • Facile à utiliser • Alimentation par batterie • • Mémoire de données non volatile Logiciel de Commande pour Windows 3.1 UTILISATION DES SIGNES EXTERIEURS Code d'article EL-WIN-Lite. FONCTIONS DES BROCHES NE PAS APPLIQUER DE TENSION D'ALIMENTATION EXTERNE A CES BROCHES LORSQUE LA PILE EST EN PLACE Connectez uniquement les sorties à des entrées à grande impédance, sans quoi les performances seront moindres et la durée de vie de la batterie sera considérablement diminuée. Facile à installer et à utiliser, le logiciel de commande permet à l'utilisateur de paramétrer le module EasyLog-Lite, de télécharger les données enregistrées et de sortir les résultats sous forme graphique. Fourni sur disquette 3 ½" avec manuel d'utilisation et câble de liaison. L'EL-WIN-Lite fonctionne sous Windows 95. 1. SW Entrée «Appuyez pour enregistrer événement». Connectée via un interrupteur à poussoir sur V 2. RS Entrée mise à zéro. Connectez sur V- pour réinitialiser le collecteur. 3. HA Sortie Alarme Haute = V+ en cas d'alarme. 4. LA Sortie Alarme Basse = V+ en cas d'alarme. 5. V+ Batterie positive 6. V- Batterie négative 7. TXD Sortie Transmission des Données. Connectez à l'entrée réception de l'ordinateur. 8. RXD Entrée Réception des Données. Connectez à la sortie transmission de l'ordinateur. REMPLACEMENT DE LA BATTERIE N'utiliser que des batteries à lithium ½AA 3,6 V. La liste ci-dessous n'est pas exhaustive. Vérifiez auprès du fabricant que la batterie commandée est montée "par pression", sans lames à braser. Faites attention à connecter correctement la batterie. NE PAS POUSSER SUR LCD LORS DE L'INSERTION DE LA BATTERIE. MAXELL ER 3S TC ne s'applique pas SAFT LS3 ne s'applique pas SONNENSCHEIN SL-750/S 1107 501 100 TADIRAN ½AA/S 1551-02-210-000 AVERTISSEMENT Manipulez les batteries au lithium avec précaution en tenant compte des avertissements indiqués sur l’emballage. Conformez-vous à la réglementation locale pour la mise au rebut. FABRICANT NUMERO DE PIECE CODE COMMANDE FABRICANT

EL-Lite bietet eine einfache Lösung für das Messen, Anzeigen und Aufzeichnen von

Temperaturen. Der Speicher dieses Geräts hält bis zu 8064 Meßwerte; die integrale Batterie hat eine Laufzeit von bis zu drei Jahren. * EL-Lite läßt sich problemlos programmieren und überträgt seine Daten über eine integrierte Kommunikationsverbindung. EL-Lite wirkt als allein stehender Logger, läßt sich aber auch permanent in ein System einbinden. Anwendungsbeispiele umfassen u.a. die Überwachung von „kritischen Werten" bei Gefriertemperaturen, die Verwendung in Versorgungseinrichtungen sowie bei der Umweltüberwachung. Die PC-Software EL-WIN-Lite läuft unter der Windows 3.1 Betriebssoftware, und der Bediener benötigt keine speziellen Vorkenntnisse. Der Datenausgang erfolgt im Textformat und läßt sich problemlos in bekannte Kalkulationstabellen integrieren. Dasselbe Softwarepaket enthält außerdem eine grafische Ausgabe. Beziehen Sie sich für weitere Einzelheiten bitte auf die EL-WIN-Lite-Softwareanleitung. • Integrierter Temperatursensor • Bedienungsfreundlich • Batteriebetrieb • Umweltgeschützt • Nicht flüchtiger Datenspeicher Windows 3.1 Steuerungssoftware VERWENDUNG EXTERNER SIGNALE BATTERIEWECHSEL Bestell-Nr. EL-WIN-Lite PIN-FUNKTION ANDIESE PINS KEINE EXTERNE BATTERIE ANKLEMMEN, WENN DIE BATTERIE EINGELEGT IST. Ausgänge nur an Eingängen mit hoher Impedanz anschließen, sonst wird die Leistung beeinträchtigt und die Laufzeit der Batterie bedeutend reduziert. WARNUNG: Behandeln Sie Lithiumbatterien mit Vorsicht. Achten Sie auf die Warnungen auf dem Die einfach zu installierende und zu verwendende Steuerungssoftware dient dem Einrichten des EasyLog-Lite-Moduls durch den Benutzer, dem Herunterladen gespeicherter Daten und der grafischen Darstellung der Ergebnisse. Die Software wird auf 3 ½" Disketten mit Handbuch und Verbindungskabel ausgeliefert. EL-WIN-Lite läuft auch unter Windows 95. 1. SW Zum Aufzeichnen des Ereigniseingangs drücken. Anschluß an V- über einen Schubschalter. 2. RS Eingang zurückstellen. Anschluß an V- zum Zurückstellen des Loggers. 3. HA Alarm-hoch-Ausgang = V+ im Alarmzustand. 4. LA Alarm-tief-Ausgang = V+ im Alarmzustand. 5. V+ Batterie-Pluspol. 6. V- Batterie-Minuspol. 7. TXD Datensendeausgang. Anschluß an den Empfangseingang am Rechner. 8. RXD Datenempfangseingang. Anschluß an den Sendeausgang des Rechners. Verwenden Sie nur ½ AA 3,6V Lithiumbatterien. Die nachfolgende Liste versteht sich nicht als exklusive. Prüfen Sie bei Ihrem Lieferanten, ob diese Batterie eingepreßt werden kann und keine Lötnasen aufweist. Achten Sie auf die polrichtige Verbindung. DRÜCKEN SIE BEIM EINLEGEN DER BATTERIE NICHT AUF DIE LCD. MAXELL ER 35 TC Entfällt SAFT LS3 Entfällt SONNENSCHEIN SL-750/S 1107 501 100 TADIRIAN ½ AA/S 1551-02-210-000 Batteriegehäuse. Entsorgen Sie diese Batterien in Übereinstimmung mit einschlägigen lokalen Vorschriften. Hersteller Bestell-NR. Hersteller-Bestellcode

EL-Lite offre una soluzione semplice per la misurazione, visualizzazione e registrazione della

temperatura. Il modulo possiede una capacità di memoria di 8064 letture ed una batteria che presenta un'autonomia fino a 3 anni. * EL-Lite può essere facilmente programmato e consente il trasferimento di dati mediante il connettore di comunicazione integrale. L'apparecchio EL-Lite può essere utilizzato come registratore "stand-alone" oppure come modulo costantemente collegato ad un sistema. Esempi di applicazione comprendono il monitoraggio "Debita diligenza" della temperatura di refrigerazione, l'impiego di utility e il monitoraggio dell'ambiente. Il software per PC, EL-WIN-Lite, funziona in ambiente Windows 3.1 e non richiede particolari competenze per essere impiegato. L'uscita dei dati, disponibile in formato testo, può essere facilmente importata nei fogli elettronici più comuni. La rappresentazione grafica può essere eseguita utilizzando lo stesso pacchetto software. Per ulteriori informazioni consultare il manuale del software EL-WIN-Lite. • Sensore di temperatura incorporato • Semplice da utilizzare • Alimentazione a batteria • Protezione contro gli effetti ambientali • Memoria dati non volatile Software di controllo per WINDOWS 3.1 IMPIEGO DI SEGNALI ESTERNI SOSTITUZIONE DELLA BATTERIA Codice prodotto EL-WIN-Lite FUNZIONE DEI PIN NON APPLICARE UNA TENSIONE DI ALIMENTAZIONE ESTERNA A QUESTI PIN QUANDO LA BATTERIA E' INSTALLATA Collegare le uscite esclusivamente ad ingressi ad alta impedenza. In caso contrario, il rendimento ne risulterà alterato e l'autonomia della batteria si ridurrà notevolmente. AVVERTENZA: Le batterie al litio devono essere maneggiate con cautela, rispettando le avvertenze riportate sul contenitore. Procedere allo smaltimento conformemente alle norme locali in vigore. Di semplice installazione ed utilizzo, il software di controllo consente all'operatore di installare il modulo EasyLog-Lite, scaricare i dati memorizzati e disporre i risultati in grafici. Fornito su disco da 3,5" con manuale software e cavo di comunicazione. EL-WIN-Lite funziona in ambiente Windows 95. 1. SW Ingresso "Push to record event" (Premere per registrare evento). Connesso a V- mediante interruttore a pressione. 2. RS Ingresso di reset. Connettere a V- per resettare il registratore. 3. HA Uscita di allarme alto = V+ in presenza di allarme 4. LA Uscita di allarme basso = V+ in presenza di allarme 5. V+ Polo positivo della batteria. 6. V- Polo negativo della batteria. 7. TXD Uscita trasmissione dati. Connettere all'ingresso di ricezione del computer. 8. RXD Ingresso ricezione dati. Connettere all'uscita di trasmissione del computer. Utilizzare esclusivamente batterie al litio ½AA da 3.6 V. L'elenco riportato di seguito non è esaustivo. Verificare con il fornitore che la batteria ordinata sia di tipo "press fit" e non debba essere montata con linguette a saldare. Prestare attenzione ad eseguire correttamente i collegamenti. NON ESERCITARE PRESSIONE SUL DISPLAY LCD DURANTE L'INSERIMENTO DELLA BATTERIA. MAXELL ER3STC non applicabile SAFT LS3 non applicabile SONNENSCHEIN SL-750/S 1107 501 100 TADIRAN ½AA/S 1551-02-210-000 Produttore N. Comp. Codice Ordinazione Produttore

3.6V ½AA lithium (up to 3 years life) *

Serial link Sensor connection Memory Up to 8000 readings Sample rate 1 sample per 5 seconds to 1 per 12 hours * Dependent on sampling rate. Operating Temperature -10 to +50°C Temperature Measurement -10 to +50°C 0.5°C ±1°C +14 to +122°F 0.5°F ±2°F 3.5mm Audio jack & 9 pin "AT" style Sensor mounted inside module Spécification Plage Résolution Précision Batterie * Température d'utilisation Mesure de la température 3,6V ½AA lithium (durée de vie jusqu'à 3 ans) Liaison série Jack audio 3,5 mm et de type «AT» 9 broches Connexion du capteur Capteur monté à l'intérieur du module Capacité mémoire Jusqu'à 8000 lectures Cadence d'enregistrement Selon la cadence d'échantillonnage. De 1 échantillon toutes les 5 secondes à 1 toutes les 12 heures -10 à +50°C -10 à +50°C 0,5°C ±1°C +14 à +122°F 0,5°F ±2°F * Spezifikation Bereich Auflösung Genauigkeit * Betriebstemperatur Temperaturmessung Batterie 3,6V ½ AA Lithium (Laufzeit von bis zu 3 Jahren) * Serielle Verbindung 3,5 mm Audiostecker u. 9-PIN „AT"-Verbindung Sensoranschluß Der Sensor ist im Modul integriert. Speicher bis zu 8000 Messungen Meßrate 1 Messung/5s bis 1 pro 12 Stunden Je nach Proberate. -10 bis +50°C -10 bis +50°C 0,5°C ±1°C +14 bis +122°F 0,5°F ±2°F Specifiche Portata Risoluzione Precisione * Temperatura di esercizio Misurazione temperatura Batteria Al litio ½AA 3.6 V (con autonomia fino a 3 anni)* Collegamento seriale Presa jack audio da 3.5 mm e tipo "AT" a 9 pin Connessione sensore Sensore installato all'interno del modulo Capacità di memoria Fino a 8000 letture Frequenza di registrazione A seconda della frequenza di campionamento. Da 1 campione ogni 5 secondi a 1 campione ogni 12 ore -10 a +50°C -10 a +50°C 0,5°C ±1°C +14 a +122°F 0,5°F ±2°F 6 GB F D I

Capteur de température

Temperatursensor Sensore della temperatura 1. SINGLE EVENT OPERATION 2. PUSH TO START (Make sure logger is set up correctly within EL-WIN software.) or if selected via EL-WIN-Lite software. 1. OPERATION NON-RECURRENTE 2. APPUYEZ POUR DEMARRER 1. EINZELEREIGNIS-BETRIEB 2. ZUM STARTEN DRÜCKEN 1. OPERAZIONE UNICA 2. PUSH-TO-START (Premere per avviare) (Vérifiez que le collecteur est correctement paramétré dans le logiciel EL-WIN). ou Si vous l'avez sélectionné via le logiciel EL-WIN. (Stellen Sie sicher, daß der Logger in der EL-WIN-Software richtig eingestellt ist.) oder wenn über die EL-WIN-Lite-Software ausgewählt. (Assicurarsi che il registratore sia stato installato in modo corretto all'interno del software EL-WIN.) oppure se selezionato mediante software EL-WIN-Lite. 5 1 6 9 COMPUTER ORDINATEUR RECHNER COMPUTER RS232 3.5mm Stereo jack plug Fiche de jack stéréo 3,5 mm 3,5 mm Ø Stereostecker Spina jack stereo da 3,5 mm

INSERTION DANS UN PANNEAU

All dimensions in mm (inches) Toutes les dimensions sont en mm (pouces) PANEL FITTING Panel cut-out 45 x 22.2 (1.77 x 0.87) Découpe panneau 45 x 22,2 (1,77 x 0,87) Approchez le cadre par l’avant du panneau et le module par l’arrière. Alternativement le module et le cadre peuvent être assemblés avant l’insertion dans le panneau mais vous devez veiller à ne pas forcer. Finalement, insérez la glace sur l’avant du cadre. Fit the bezel to the front of the panel and then locate the meter into the bezel from behind. Alternatively the meter and bezel may be assembled before fitting into the front of the panel but care must be taken not to use excessive force. Finally fit the window into the front of the bezel. ABMESSUNGEN EINBAUHINWEISE DIMENSIONI MONTAGGIO SU PANNELLO Alle Abmessungen in mm (Zoll) Einbauausschnitt Bauen Sie die Fassung von vorne in die Frontplatte ein, und setzen Sie danach das Meßgerät von hinten in die Fassung ein. Das Meßgerät und die Fassung können auch vor dem Einbau zusammengebaut werden, dabei muß jedoch darauf geachtet werden, daß keine Gewalt angewandt wird. Zu letzt kann das Fenster von vorne in die Fassung eingesetzt werden. Tutte le dimensioni sono espresse in mm (pollici) Finestra pannello Montare la cornice sulla parte anteriore del pannello e posizionare il contatore all’interno della cornice inserendolo dalla parte posteriore. In alternativa, il contatore e la cornice possono essere assemblati prima di essere montati sulla parte anteriore del pannello, ma in questo caso prestare attenzione a non applicare una pressione eccessiva. Infine, montare la finestra sulla parte anteriore della cornice. 45 x 22,2 (1,77 x 0,87) 45 x 22,2 (1,77 x 0,87) f g a. 5.13 (0.20) b. 1.60 (0.06) c. 16.0 (0.63) d. 2.57 (0.10) e. 0.65 (0.03) f. 1.50 (0.06) g. 9.00 (0.35) 48 (1.89) 24 (0.94) D I F GB Specifications liable to change without prior warning EL-LITE Issue 7 January/2000 M.C. Applies to EL-LITE/5 Spécifications peuvent changer sans préavis EL-LITE Edition 7 janvier/2000 M.C. Applique à EL-LITE/5 EL-LITE /2000 EL-LITE/5 EL-LITE /2000 EL-LITE/5 Die technischen Daten können ohne vorherige Ankündigung geändert werden Ausgabe 7 Januar M.C. Gilt für Specifiche soggette a variazione senza preavviso Versione 7 M.C. Applicabile a Gennaio a b c 40.4 (1.59) 31.4 (1.24) + - 20.3 (0.80) 14.1 (0.56) 27.5 (1.06) d e 18.2 (0.72) 37.4 (1.47)

Other Data Loggers Manuals