PROAIM BMP-40R Assembly Manual
Text of the manual
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Blimp Mic Windshield (BMP-40R)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or o
Open the locking clip on the blimp cage from
both sides as shown in the image.
Take the mic holder rod out of the cage.
NOTE: The rubber and holder clamps come
attached to the rod. But if any rubber or clamp
is not in a good condition, you can replace it as
shown in the images.
Blimp Mic Windshield Setup
Insert mic into the suspension system a
Adjust the wire on the blimp cage with the
handle.
Now close the cap on the blimp cage, and ad-
just the wire of the blimp cage with the han-
dle again.
Securely connect the XLR connectors on the
coiled audio cable to the XLR connectors on
the blimp cage.
NOTE: Boom pole height can be increased/
decreased with the help of a boom pole adapter
�
Correctly insert the adapter set and secure it
with the ratchet knob on the other side of the
blimp cage.
After assembling the blimp pole, you can also
use it with a Synthetic fur cover to further
minimize the noise.
Attach the smaller size adapter with the blimp
cage to reduce the height of the boom pole.
Blimp cage properly secure with ad
YOUR PROAIM BMP40 R BLIMP MIC WINDSHIELD
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer one year warranty for our products from date of purchase. Within this period of
time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor
does it cover a product subjected to misuse
