Silverline 4170 Operation & User’s Manual

2 MANUFACTURER Merz�fon OSB AMASYA, S�lverl�ne IMPORTER V�a Carlo Porta 4 20813 Bov�s�o Masc�ago (MB) - Italy

1 INPUT................................................................................... 4 2 Technical Drawing.............................................................. 5 3 WARNINGS AND SAFETY MEASURES............................. 6 3.1 RISK OF DEATH RISK OF POISONING...................... 8 4 USAGE WITH OR WITHOUT CARBON FILTER............... 12 5 CARBON FILTER REPLACEMENT.................................. 13 5.1 AF 100 Carbon Filter Replacement............................ 13 6 CLEANING AND PREVENTIVE MAINTENANCE............. 14 6.1 CLEANING ALUMINUM FILTERS.............................. 14 6.2 Washing in the Dishwasher........................................ 15 6.3 Manual Washing......................................................... 15 7 LOCATION OF THE DEVICE............................................. 16 7.1 Installatıon and Unpacking......................................... 16 7.2 Recommendations on Energy Savings....................... 17 8 OVERVIEW OF THE HOOD............................................... 18 9 INSTALLATION OF PRODUCT......................................... 19 10 HOW TO USE THE PRODUCT.......................................... 23 10.1 How to use 5 Spd Dig Touch Control Product.......... 23 10.1.1 Boost:..................................................................... 24 10.1.2 REMOTE CONTROL............................................. 25 11 LAMP REPLACEMENT..................................................... 26 11.1 Halogen Lamp Replacement.................................... 26 11.2 Spotlight Replacement.............................................. 26 12 AUTHORIZED SERVICE.................................................... 28 12.1 TECHNICAL CHART................................................ 29 Table of contents 20.03.2018 4170_4180 HOOD USER GUIDE 3

tion for a safe mounting as well as a safe use without defects. n Please read all of this guideline and safety data before using the device. n Keep the guideline in an appropriate place. n If you pass the device onto others, make sure you also give this guideline and safety data. n Disregarding this guideline may result in severe injuries and defects in the device. n Please keep in mind that we won't be responsible for the defects arising from not taking this guideline into account. The figures in this guideline aim to visually describe the actions. In these figures only one model of the device is illustrated. However, all instructions or figures also represent other models. INPUT 20.03.2018 4170_4180 HOOD USER GUIDE 4

400 400 m�n.800/ max.1200 20 650 27 80 570 Fig. 2: 4180 Technical Drawing 20.03.2018 4170_4180 HOOD USER GUIDE 5

n This appliance can be used by children of 8 years and older, people with physical, sensory or mental capability deficiency or people with lack of experience or knowledge; as long as they are provided supervision or instructions for the safe use of the appliance and they comprehend the dangers. n Children should not tamper with the appliance. Cleaning and user maintenance operations must not be performed by chil- dren unless supervised. n This product is designed for home use. n Usage voltage of your product is 220-240 Volt~5060 Hz. n Power cord of your product is fitted with a grounded plug. This cord must be plugged into a grounded outlet. n The whole electrical wiring must be installed by a qualified electrician. n Installation by unauthorized persons could lead to poor opera- tion performance, damage to the product, and accidents. n Feeder cable of the appliance mustn't be exposed to jamming or crashing during assembly. Feeder cable mustn't be placed near the cooker. In such cases, it might melt down and lead to fire. n Do not plug in the appliance before the installation. n Make sure that the installation place allows the user to easily unplug the power cable in case of any danger. n Do not touch your product's lamps when they work for a long time. The lamps may burn your hand as they will be hot. n Kitchen hoods are manufactured for household use in normal home cooking. There is a risk of malfunction in other types of use, and the product guarantee will be void. n Comply with the rules and instructions regarding discharge of outgoing air, stipulated by the relevant authorities. (This warning does not apply to uses without flue.) n Flammable foods must not be cooked under the appliance. n Start your product after you place pot, pan etc. on the stoves. Otherwise, high temperature may cause same parts of your products to deform. n Turn off the cooker's burner before taking the saucepan, pan, etc. off the cooker. n Do not leave boiling oil on the stove. Pots that contain boiling oil may catch fire by itself. n Since oils could catch fire when you cook fried foods in partic- ular, be careful about your curtains and tablecloths. n Ensure timely replacement of the filters. Filters not replaced in a timely manner pose risk of fire due to accumulated grease deposits on them. n Do not use non-fire-resistant filtering materials instead of the filter. n Do not operate your product without filter, and do not remove the filters when the product is in operation. n In case of any fire, de-energize the hood and any other cooking devices. (Plug off the appliance or turn off the main switch.) WARNING AND SAFETY PRECAU- TIONS WARNINGS AND SAFETY MEASURES 20.03.2018 4170_4180 HOOD USER GUIDE 6

manner, it could pose risk of fire. n De-energize the appliance before any maintenance operations. (Plug off the appliance or turn off the main switch.) n When electric cooker hood and devices fed with energies other than electricity operate simultaneously, the negative pressure in the room must not exceed 4 Pa ( 4 X 10 bar ). n Gas or fuel oil burning appliances, such as room heaters, which share the same environment with your product, must be fully insulated from the exhaust of this product or they must be hermetical. n When you make a flue connection for your product, use pipes with a diameter of 150mm or 120 mm. The length of the duct connection as well as the number of elbows must be as min- imum as possible. n Children must not play with the appliance. n For your safety, use ”MAX 6 A” fuse in the hood system. n Since the packing materials could be dangerous, keep them away from children. n If the feeder cable is damaged, it must be replaced by its man- ufacturer or its authorized technical service or any other per- sonnel qualified at the same level, in order to avoid any dan- gerous situation. n In case of any deflagration, de-energize the cooker hood and cooking appliances, and cover the flame. Never use water to extinguish the fire. n When cooking appliances are in operation, their accessible parts could be hot. n This appliance is not intended to be used by people with phys- ical, sensory and mental disabilities (including children) or those who have not adequate experience and knowledge regarding its use, unless they are under the supervision of a person responsible for the safety of the appliance. n After the installation of the hood, the minimum distance must be 65 cm between the product and any electric cooker; and 75 cm between it and any gas ranges or cookers burning other fuels. n Output of the hood must not be connected to air ducts, where there exist another smokes. n You must be careful when using the appliance spontaneously with other appliances (e.g. gas, diesel fuels, coal, wood, etc. burning heaters, shower heaters), which use the same air in the same environment. Attention must be paid when using them simultaneously. It is because the hood could adversely affect the combustion, by discharging the ambient air. n This warning does not apply to uses without flue. n When electric cooker hood is used simultaneously with devices that use gas or other fuels, there must be sufficient ventilation in the room (might not apply to devices that discharges the air back into the room). WARNINGS AND SAFETY MEASURES 20.03.2018 4170_4180 HOOD USER GUIDE 7

DANGER! Warning - Choking Hazard The packaging materials are dangerous for chil- dren. Never allow children to play with packaging materials. DANGER! Warning - Death Hazard There are life-threatening danger and poisoning danger due to reabsorbed combustion gases. During the air discharge outlet use, unless suffi- cient air supply is provided, do not use the appli- ance simultaneously with devices that discharge toxic gases through flue such as ventilated, gas, oil, wood or coal burning heaters, shower heaters, water heaters, etc.Fig. 3 Ventilated goods (e.g. gas, oil, wood or coal burning heaters, shower heaters, water heaters) take combustion air from the instal- lation location, and discharge the waste gas through a waste gas system (e.g. flue). When the cooker hood is active, it absorbs air from the kitchen and neighbouring rooms. If adequate air entry is not provided, vacuum emerges. In such a case, the toxic gases are absorbed from the flue and waste gas channel, and are taken into to door again. Fig. 3 n Therefore, adequate fresh air ingress must always be ensured.Fig. 4 Fig. 3: Poisoning Danger Fig. 4 WARNINGS AND SAFETY MEASURES RISK OF DEATH RISK OF POISONING 20.03.2018 4170_4180 HOOD USER GUIDE 8

fire.Clean the oil filter at least once every 3 months.Never operate the device without the oil filter. – The oil residue in the oil filter may catch fire. Never work with open flame (ex. flambe) near the device. The apparatus is allowed to be installed near a solid fuel (e.g. wood or coal) heater only if it has a non-removable cover. No sparks should be scattered. – Hot oils and fats catch fire easily. Hot oils and fats should never be left unattended. Never try to put out the fire with water. Turn off the cooker. Kill the flames carefully using a cover, fire blanket or a similar material. – Gas operated cookers that do not have a cooking pot on create high heat during opera- tion. A ventilation device placed over the cookers can be damaged or burned for this reason. Operate gas cookers only when there is a cooking pot on them. – Operating multiple gas cookers simultaneously creates high heat. A ventilation device placed over the cookers can be damaged or burned for this reason. Never operate two gas cookers longer than 15 minutes on high flame setting. A large burner over 5kW (Wok) has the power of two gas burners. DANGER! Electrocution hazard! – A malfunctioning device may cause electric shock. Never turn on a malfunctioning device. Pull the power plug and switch off the circuit breaker. Call customer service. – Unsuitable repairs pose hazards. Repairs and replacement of damaged power cords must be performed only by a customer services techni- cian trained by us. If the device is malfunc- tioning pull the power plug and switch off the circuit breaker. Call customer service. – Water leaking into the device may cause elec- tric shock. High pressure or steam cleaners must not be used. WARNINGS AND SAFETY MEASURES RISK OF DEATH RISK OF POISONING 20.03.2018 4170_4180 HOOD USER GUIDE 9

– During the installation, there is a danger of physical injury due to the sharp edges. Use protective gloves throughout the installation process of the appliance. – Due to risk of dropping the appliance, assembly of all safety bolts and covers must be performed as specified in the user manual. – Objects placed on the appliance may fall over. Do not place any objects on the device. – LED lights are very bright and may damage eyes (Risk group 1). You must not look directly at running LED lights for longer than 100 sec- onds. DANGER! Risk of burning, risk of electrocution! – Wait until the device cools down prior to cleaning or maintenance work. Disconnect the fuse or unplug from the mains. – There is risk of damage due to humidity seeping into electronic parts. Never clean the control elements with a damp cloth. – The surface can be damaged as a result of incorrect cleaning. Clean stainless steel sur- faces only in the brushing direction. Do not use stainless steel cleaners for control elements. – The surface can be damaged due to sharp or scrubbing cleaning agents. Never use sharp or scrubbing cleaning agents. DANGER! Dangers of fire and physical injury! In case of repairing that is not performed according to the rules or as required, turn off the fuse or unplug the feeder cable of your appliance. Repairing must be performed only by the author- ized technical service or authorized experts. NOTICE! If the appliance is faulty or damages, turn off the fuse or unplug the feeder cable of your appliance and call the authorized service. WARNINGS AND SAFETY MEASURES RISK OF DEATH RISK OF POISONING 20.03.2018 4170_4180 HOOD USER GUIDE 10

by its manufacturer or its authorized technical service or any other personnel qualified at the same level, in order to avoid any dangerous situa- tion. NOTICE! When the bulbs of the device malfunction, switch off the circuit breaker and unplug the device's power plug from the socket. Replace the defective bulbs immediately (leave bulbs to cool down first), in order to protect the remaining bulbs against overloading. CAUTION! Accessible components might be heated when used with cooking devices. DANGER! Air outlet pipe of this appliance mustn't be con- nected in the flue used to discharge the fume gen- erated by devices that use gas or other fuels. Damage reasons CAUTION! Damage hazard due to corrosion. Always run the appliance to prevent condensate formation while cooking. Condensates may cause corrosion damage. Replace the malfunctioning lamp right away to prevent overloading of other lamps. Mois- ture intrusion in electronic parts poses a risk of damage. Never clean the control elements with a wet cloth. The surface could be damaged due to a wrong cleaning process. Clean stainless steel sur- faces only in their brushing direction. Do not use a stainless steel cleaner for the control elements. The surface could be damaged due to aggressive and abrasive cleaning agents. Never use aggres- sive and abrasive cleaning agents. There is a risk of damage due to condensate liquid backflow. Install the air exit canal with a small downward inclination (1° inclination) from the appliance. WARNINGS AND SAFETY MEASURES RISK OF DEATH RISK OF POISONING 20.03.2018 4170_4180 HOOD USER GUIDE 11

You may use this device in exhaust air mode or air circulation mode. Exhaust air mode Absorbed air is cleaned by oil filters and expelled via a pipe system.Fig. 5 NOTICE! Exhaust air should never be transferred to an active fume or exhaust gas flue nor should it be transferred to a chimney used to ventilate the areas where heating sources are installed. n If the exhaust air is required to be transferred to a deactivated fume or exhaust gas flue, you should get permission from the authorized master chimney cleaner. n If the exhaust air is sent out over the outer wall, a telescopic wall safe should be used. Air circulation mode Absorbed air is cleaned by the oil filters and active carbon filter and resent into the kitchen.Fig. 6 You need to attach an active carbon filter to con- tain the substances that give off the smell in the air circulation mode. Consult your authorized dealer for the different possibilities required to operate the device in air circulation mode. You can obtain the accessories required for this process at related outlets, authorized service or via an online sales center. Fig. 5: Air Outlet without Carbon Filter Fig. 6: Carbon-Filter Air Circulation USAGE WITH OR WITHOUT CARBON FILTER 20.03.2018 4170_4180 HOOD USER GUIDE 12

Under circumstances without a flue, an active carbon filter should be used to resend the inside air by re-filtering. An active carbon filter should be obtained from the service or your dealer. Discon- nect the device prior to replacing the carbon filter. Since the carbon filter is used in kitchens without a flue outlet, it should be replaced with a new one every 3 to 5 months subject to usage. The carbon filter should never be washed. In any case the oil filters should be attached to the product regardless of using a carbon filter or not. Do not use the product without an oil filter. 5.1 AF 100 Carbon Filter Replacement The device you have bought is suitable for use with an AF 100 carbon-filter. n 1-Place the carbon filter in its housing.Fig. 7 n 2-Rotate the carbon filter clockwise and make sure that it is seated completely.Fig. 7 If not seated completely, the carbon filter can fall and damage your product. DANGER! Never wash the carbon filters. Keep carbon filters away from children. AF 100 CARBON FILTER Fig. 7: AF 100 CARBON FILTER CARBON FILTER REPLACEMENT AF 100 Carbon Filter Replacement 20.03.2018 4170_4180 HOOD USER GUIDE 13

CAUTION! The cleaning and user service should not be car- ried out by children who unsupervised. n The surface can be damaged by sharp or scrubbing cleaning agents. Never use sharp or scrubbing cleaning agents. Obtain the appropriate cleaning and protection agents for your device from the authorized service. The surface of the device and con- trol units are sensitive to scratching. n Clean the surfaces with a soft, damp cloth, dishwashing deter- gent or a mild glass cleaning agent. Soften dried and hardened dirt with a damp cloth. Do not scrape! n Using dry cloths, sponges that may scratch, agents that require rubbing, cleaning agents containing sand, soda, acid or chlorine or other strong materials is not appropriate. n Clean stainless steel surfaces only in the direction of the grinding. n Do not use stainless steel cleaning agents and wet cloths on the control units. Cleaning metallic oil filters: Used metallic oil filters trap oily particles contained within the humidity and steam in the kitchen. Under normal usage (1-2 hours daily), clean the metallic oil filters approximately every three months. n Do not use excessively strong, acidic or chlorine containing cleaning agents. n While cleaning the metallic oil filter, also clean the trapping arrangements of the metallic oil filters in the device with a damp cloth. n You can wash the metallic oil filters in the dishwasher or by hand. 6.1 CLEANING ALUMINUM FILTERS 1 Aluminium Filter Tab Clean the aluminium oil filters periodically every 3 months. n Press the aluminium filter tab (1) and pull the aluminium filter to the direction of the arrow (Fig. 8). n As you remove the aluminium filter, hold it with your other hand to prevent it from dropping. n As you remove the aluminium filter, in order to prevent the accumulated oil to drip, keep the filter surface parallel to the floor. 1 Fig. 8 CLEANING AND PREVENTIVE MAINTENANCE CLEANING ALUMINUM FILTERS 20.03.2018 4170_4180 HOOD USER GUIDE 14

In case of washing in a dishwasher, slight discoloration may occur. This has no impact on the function of the metallic oil filter. n Do not wash heavily soiled metallic oil filters together with the dishes. n Place the metallic oil filters in the dishwasher loosely or freely standing. The metallic oil filters should be placed in the dish- washer without any compression on them. 6.3 Manual Washing You may use a special oil solvent to remove per- sistent soils. You can acquire this solvent from an authorized sales center. – Soften the stains of the metallic oil filters in hot water with dishwashing detergent. – Use a brush for cleaning and let the liquids on the metal oil filters drain completely. – Rinse the filters well after cleaning. CLEANING AND PREVENTIVE MAINTENANCE Manual Washing 20.03.2018 4170_4180 HOOD USER GUIDE 15

n Take the motor block out of its package. n The distance between motor block and the stove must be 94 cm for gas and 94 cm for electricity models (Fig. 9). n After completing the installation of hood, the minimum distance must be 65 cm between the product and any electric cooker; and 70 cm between it and any gas ranges or cookers burning other fuels (Fig. 10). 7.1 Installatıon and Unpacking n Check if there are any damages on your appliance. n Shipment damages must be reported to the shipment respon- sible immediately. n Visible defects must also be communicated to the seller. n Do not let children play with packaging material. Fig. 9 Fig. 10 LOCATION OF THE DEVICE Installatıon and Unpacking 20.03.2018 4170_4180 HOOD USER GUIDE 16

n Replace the carbon filters on a regular basis. n Regularly clean your aluminium filters. Since dirty filters would block the air passage, you might have to use the appliance at a higher speed. n Use your product according to its normal speeds. n Use at higher speed would cause an increase in the energy consumption. LOCATION OF THE DEVICE Recommendations on Energy Savings 20.03.2018 4170_4180 HOOD USER GUIDE 17

1- Ceiling Connection Plate 2- Air Outlet Perforated Plate (Usage with Carbon Filter) 3- Inner Flue 4- Body 5- Control Panel 1 2 3 4 5 Fig. 11 OVERVIEW OF THE HOOD 20.03.2018 4170_4180 HOOD USER GUIDE 18

1. To remove the side suction plate, hold from the top right and left points and pull down (Fig. 12). Open the aluminium cartridge filter lock by pressing the tab and remove it from its socket (Fig. 12). 2. To adjust the distance; remove the screws shown in (Fig. 13) and pull the motor block composed of two blocks in or out to adjust it to the correct measurement. Reinstall the screws you took out into suitable holes. Fig. 12 Fig. 13 INSTALLATION OF PRODUCT 20.03.2018 4170_4180 HOOD USER GUIDE 19

onto the installation surface and drill with Ø10 mm drill at locations specified with A,B,C,D. n Hammer the Ø10 mm plastic dowels into the holes you drilled for product installation (Fig. 14). n Screw the 5.5 x 60 ysb screws into the plastic dowels you have hammered in earlier in such a way as to remain 5mm space between the screw head and the wall (Fig. 14). n Slide the holes on the motor block that resemble key- holes onto the 5.5x60 ysb screws that you have screwed onto the wall and rotate the motor block clockwise (Fig. 14). n After fitting the screw channels on the motor block onto the installation screws, tighten the screws and fix the motor block (Fig. 14). 4. Connect one end of the aluminium pipe you will get to the plastic funnel of the product and the other end to the kitchen funnel. Check that these two connections are tight enough that they won't come out when the hood runs full speed (Fig. 15). Since twists and bends in the aluminium pipe will lead to reduction in the air suction power, avoid using twists and bends as much as possible. A B C D Fig. 14 1 Fig. 15 1- Aluminium Duct INSTALLATION OF PRODUCT 20.03.2018 4170_4180 HOOD USER GUIDE 20

motor block with the screws provided with the product (Fig. 16). 6. n Slide the product body onto the motor block (Fig. 17/A). n Slide the hanger holes that look like keyholes onto the plastic head screws and rotate the body in clockwise direction, then tighten the screws (Fig. 17/B). 1 Fig. 16 1- Inner Flue A B 1 Fig. 17 1- Body INSTALLATION OF PRODUCT 20.03.2018 4170_4180 HOOD USER GUIDE 21

Install the aluminium cartridge filter. 1 2 Fig. 18 1- Lamp Socket Connection 2- Switch Connection INSTALLATION OF PRODUCT 20.03.2018 4170_4180 HOOD USER GUIDE 22

10.1 How to use 5 Spd Dig Touch Control Product 1. Press this button to turn on the product.Fig. 19 2. Press this button to decrease the motor speed.Fig. 19 3. Dig display You can follow which speed the product is cur- rently working on this display.Fig. 19 4. Press this button to increase the motor speed.Fig. 19 5. When timer button is pressed, a 15-minute timer function will be activated; display will give a signal once the timer starts and the motor will stop automatically after 15 minutes.Fig. 19 6. Press this button to turn on and off the lamp.Fig. 19 Filters should be cleaned when "C" signal appears on the Display or (due to usage) every 2 or 3 weeks. To delete "C" signal after the filters are cleaned and replaced, press and hold ( ) button more than 3 secs (when device is off). Letter "E" will appear on the Dis- play and it will switch to normal operation. If operation before deleting the "C" signal is required, active motor speed will appear for 1 sec when you press ( ) button and then the motor will resume running. Fig. 19: 5 Spd Dig Button Cleaning Periods for Metal Filters Fig. 20: 5 Spd Dig Button HOW TO USE THE PRODUCT How to use 5 Spd Dig Touch Control Product 20.03.2018 4170_4180 HOOD USER GUIDE 23

2. Press this button to decrease the motor speed.Fig. 20 3. Dig display You can follow which speed the product is cur- rently working on this display.Fig. 20 4. Press this button to increase the motor speed.Fig. 20 5. When timer button is pressed, a 15-minute timer function will be activated; display will give a signal once the timer starts and the motor will stop automatically after 15 minutes.Fig. 20 6. Press this button to turn on and off the lamp.Fig. 20 Filters should be cleaned when "C" signal appears on the Display or (due to usage) every 2 or 3 weeks. To delete "C" signal after the filters are cleaned and replaced, press and hold ( ) button more than 3 secs (when device is off). Letter "E" will appear on the Dis- play and it will switch to normal operation. If operation before deleting the "C" signal is required, active motor speed will appear for 1 sec when you press ( ) button and then the motor will resume running. 10.1.1 Boost: When the product is switched to maximum speed while it is oper- ated, a ( ) symbol shall be displayed on the screen. 'b' symbol indicates that boost (boost ventilation) mode is active on the model. Product shall operate for 7 minutes in this mode and ‘b’ symbol shall flash on the screen during this period. After 7 minutes, product shall automatically switch down one speed level and shall resume operation in the lower speed level. It is not possible to use timer feature in the boost mode. Cleaning Periods for Metal Filters HOW TO USE THE PRODUCT How to use 5 Spd Dig Touch Control Product > Boost: 20.03.2018 4170_4180 HOOD USER GUIDE 24

3- Motor Speed Decrease 4- Lighting On/Off Remote control is sold together with the product optionally. The product you bought may not have remote control option. Fig. 21: REMOTE CONTROL HOW TO USE THE PRODUCT How to use 5 Spd Dig Touch Control Product > REMOTE CONTROL 20.03.2018 4170_4180 HOOD USER GUIDE 25

WARNING! Disconnect the electrical supply of the hood. Leave the lamps to cool down first because they could burn your hands when they are hot. It indicates the maximum power consumption of the lamp. A lamp with same power rating should be used when replacing the lamp. To find out the power rating used in the product, see the declaration label in the product. Only self-protection tungsten halogen lamp or self-protection metal halide lamp must be used. For replacing the halogen lamps, push downwards on the lamp holder from its behind, turn it a little bit counter-clockwise, and take it out downwards.Fig. 23 11.2 Spotlight Replacement It indicates the maximum power consumption of the lamp. A lamp with same power rating should be used when replacing the lamp. To find out the power rating used in the product, see the declaration label in the product. DANGER! When replacing lamps, lamp’s glass may be broken and cause injuries. max 50 W IEC Fig. 22: Halogen lamp symbol Fig. 23: Halogen Lamp Replacement max 20 W Fig. 24 LAMP REPLACEMENT Spotlight Replacement 20.03.2018 4170_4180 HOOD USER GUIDE 26

nium cartridge filter. Remove the faulty bulb and replace with a new one with the same rating (Fig. 25). DANGER! Leave the lamps to cool down first because they could burn your hands when they are hot. Fig. 25 LAMP REPLACEMENT Spotlight Replacement 20.03.2018 4170_4180 HOOD USER GUIDE 27

not faulty. n Check bulbs. Make sure to unplug the appliance while making this check. Tighten the lamps if they are loose. Replace them if they still do not work. n Check if the appliance is plugged in or that the plug is secured in the socket. n Check the breaker of the appliance and the main breaker of your house. n Does the appliance have a sufficient flue diameter? (min. 120mm). n Are the metallic filters clean? Check. n If you are using the hood without a flue, make sure the carbon filters are no older than 6 months. n Make sure your kitchen is ventilated enough to ensure air flow. If you are still dissatisfied with your appliance’s performance, contact the authorized service. Fault description Cause Remedy The product does not work Check the electricity connection. The mains voltage must be 220-240V and the product must be connected to an earth socket. Lighting lamp does not work. Check the electricity connection. The mains voltage must be 220-240V and the product must be connected to an earth socket. Lighting lamp does not work. Check the lamp switch. Lamp switch must be in the “on” position. The lighting lamp does not work. Check lamps. The product lamps must not be faulty. The product air inlet is weak Check Aluminum filter The aluminum cartridge filter must be washed at least once a month under normal conditions. The product air inlet is weak Check Air Exhaust Flue. The air exhaust flue must be open. The product air inlet is weak Check Carbon filter In products where carbon filters are used, the carbon filter must be replaced once every 3 months under normal conditions. If the Lighting is not working: Possible Failures and Actions You Can Take Without Calling the Service: A) Appliance does not work at all: If the device shows low perform- ance or makes loud noises while working: Problems and Solutions AUTHORIZED SERVICE 20.03.2018 4170_4180 HOOD USER GUIDE 28

(Use without Flue) Check Aluminum filter The aluminum cartridge filter must be washed at least once a month under normal conditions. Does Not Discharge Air (Use without Flue) Check Carbon filter In products that carbon filters are used, carbon filter must be replaced once in 3 months under normal con- ditions. 12.1 TECHNICAL CHART Feed Voltage 220 - 240 V 50Hz Motor Insulation Class F Insulation Class CLASS I This product conforms with Directive 2004/108/EC for Electromag- netic Compatibility and Low Voltage Directive (LVD) 2006/95/EC. This product conforms with the Waste Electrical & Electronic Equipment (WEEE) Directive. AUTHORIZED SERVICE TECHNICAL CHART 20.03.2018 4170_4180 HOOD USER GUIDE 29