West Mountain Radio RIGrunner 10010i Manual 

to memory, and the unit will return to normal operation. Here is an overview of the valid radio frequency regions supported: •� FCC – USA. Channels 1-11 valid. •� IC – Canada. Channels 1-13 valid. •� ETSI – Europe. Channels 1-13 valid. •� JAPANB – Japan full access. Channels 1-13 valid. Using the factory reset command (detailed in this manual’s section labeled ‘DHCP Toggle, WIFI networking mode toggle and Factory Reset’) will not change this value back to FCC. If the RIGrunner 4005i is ...

of Anderson Power Products, Inc. ADDITIONAL RESOURCES Go to our support page for more assistance: http://www.westmountainradio.com/supportrr.htm Go to our OpTips page for connection tips: http://www.westmountainradio.com/optipsrr.htm Overall Dimensions 1.75” H x 19” W x 8.5” D Weight 51.2 oz Input Voltage Range +/-2.5% Max, Total Continuous 100A Max. Port Continuous 35A @ 25ºC Max Port @ 1 minute 40A @ 25ºC Operating w/Backlight 160mA Operating no Backlight 150mA Current: 10010i ...

If the network being used by the RIGrunner does not have a DHCP server, the static IP configuration of the RIGrunner has to be changed to be compatible with the RIGrunner. For example, if the IP range of the network is 10.0.*.* the IP address of the RIGrunner needs to be changed to a valid number in the range and the netmask needs to be changed to 255.255.0.0. If the IP range of the network is 192.168.100.*, then the factory default settings of the RIGrunner would be valid. Changing the network configuration of the RIGrunner can only be done through a web br ...

If the network being used by the RIGrunner does not have a DHCP server, the static IP configuration of the RIGrunner has to be changed to be compatible with the RIGrunner. For example, if the IP range of the network is 10.0.*.* the IP address of the RIGrunner needs to be changed to a valid number in the range and the netmask needs to be changed to 255.255.0.0. If the IP range of the network is 192.168.100.*, then the factory default settings of the RIGrunner would be valid. Changing the network configuration of the RIGrunner can only be done through a web br ...