TriMark e-ASK Installation Instructions Manual

e-ASK Keyless-entry System Installation & Instructions PPrreevvoosstt CCAANN M Muullttiipplleexx SSyysstteem m 4 6 Rev. A 2014DE19

Introduction ............................................................................................. 3 e-FOB Operation and Features .............................................................. 3 Lock All Conditions ................................................................................ 4 Locking doors with keypad ................................................................... 4 Secure Operations .................................................................................. 4 Unlock Entry.......................................................................................... 5 Unlatch Entry ........................................................................................ 5 Unlock Luggage .................................................................................... 5 Lock All ................................................................................................. 5 Additional Features ................................................................................. 5 e-PAD Anti-tamper Deactivating Feature ............................................. 5 e-Pad Lighting ....................................................................................... 5 Status LED ............................................................................................ 6 Miscellaneous e-ASK Module Features ............................................... 6 Lock and Unlock Confirmation.......................................................... 6 Door Ajar Warning ............................................................................ 6 Alarm ................................................................................................ 6 Reduced Security ............................................................................. 6 Wake Up Out .................................................................................... 7 Panic Mode ....................................................................................... 7 Teaching Additional Transmitter FOBs ................................................ 7 Teaching Keypad New Access Codes .................................................. 8 Deleting keypad Access Codes ............................................................. 9 Troubleshooting ...................................................................................... 9 e-ASK CAN DIP Switch Configuration – Prevost Custom .................. 12 Appendix A: Connectors and Pinouts ................................................. 13 2

installation and use of TriMark’s CAN e-ASK system including vehicle module and keypad in the Prevost system. e-FOB Operation and Features Button Function Lock All Locks entry and luggage doors and arms security system. Unlock Entry Unlocks entrance door and disarms security system. Hold button to unlatch door. Panic Activates panic mode when pressed and held for 2 seconds. Luggage Unlock Unlocks luggage doors. Does not disarm alarm. 3

Lock all from either the fob or keypad will not function if the following conditions exist: • Ignition is ON • Entry door is OPEN. (entrance door hinge switch (J1P23) is activated). e-PAD Operation and Features The e-PAD is shipped with a default access code and a unique authority code. The authority code is printed on the product label. Unless the OEM or dealer has changed default codes, the access code is: Access code: Digit 1 Digit 2 Digit 3 Digit 4 1/2 3/4 5/6 7/8 Locking doors with keypad Press and hold down the (9/0) button for 1-2 seconds. An access code is not needed to lock the doors Secure Operations Entering a valid 4-digit access code enables secure operations. After entering an access code, the keypad is enabled for 5 seconds and a fifth button press and release initiates a secure operation. (1/2): Unlock Entry Door (1/2) hold: Unlatch Entry Door (3/4): Unlock All (5/6): Unlock Luggage (7/8) hold: Panic output Notes: • If an unassigned button or no button is pressed while the system is enabled, the keypad reverts back to disabled state. • A double beep after the 4th digit indicates correct code and readiness for an output command. 4

entrance door hinge switch (J1P23) are not activated (input floating). If either of these inputs are activated, the entrance door unlock output (J4P6) will not occur. This applies to fob, keypad and switch input (J1P9). The keypad secure operations of (1/2) and (3/4) can unlock the entrance door. Unlatch Entry The unlatch entry output (J1P6) occurs after holding the fob unlock entry button or secure operation (1/2) button for 2 seconds. If the key switch input (J1P1) indicates that the door is already unlocked, an access code is not need to unlatch from the keypad. Unlock Luggage The unlock luggage output (J4P4) occurs with fob luggage unlock and secure operations (3/4) and (5/6). Lock All The lock all output (J4P5) requires that the ignition (J2P8) be off and the entrance door hinge switch (J1P23) be floating (door closed). This applies to lock all from fob and keypad. The dash mount lock switch (J1P11) works even when the ignition is on. Additional Features e-PAD Anti-tamper Deactivating Feature After repeated attempts to enter codes (20 button presses without enabling), the keypad enters an inactive mode that disables buttons for 1 minute. The lock indicator flashes red and amber during this state. This helps prevent undesired access by entering random codes. No beep will sound with button press while the system is disabled. e-Pad Lighting The e-PAD back lighting is typically off. When a button is pressed, the backlight goes high momentarily. After button presses stop, the backlight is low for 30 seconds. After 30 seconds of no keypad activity the keypad back lights turn off again. While training new access codes and fobs the backlighting flashes continually. 5