Playworld UN4279 Installation Instructions

ECN 1153 & *PA1093 Page 1 of 5 Installation Instructions Installation Instructions Universal Models UN4279, UN4280, UN4438, & UN4439 Telescope Pipe Wall Mount (CH/EX) or (PM) & Telescope Pipe Wall Mount w/ Lens (CH/EX) or (PM) Installation Preparation Recommended Crew: ........................... One (1) adult Installation Time: ................................... 0.5 hour Use Zone: .............................................. Refer to Master Drawing User Group Age (years): ....................... ASTM/CSA: 2-12, EN: 2-14 Assembly View (representative model) Model Description ZZUN4279 Pipe Wall Mount (CH/EX) ZZUN4280 Pipe Wall Mount for (PM) ZZUN4438 Pipe Wall Mount w/Lens (CH/EX) ZZUN4439 Pipe Wall Mount w/Lens (PM) ICON KEY Fully Tighten Hardware Critical Fall Height Do Not Fully TIghten Hardware Pour Concrete Drill Dig Footing Holes Hammer

ECN 1153 & *PA1093 Page 2 of 5 Detail A Step 3 Follow the details in alphabetical order. For clarifi cation, each detail references the step description. The step descriptions start on page 4. Lens AMC0189 (1) Total Telescope AAU0168 - only (1) Total Half Ring AAU0167 (1) Total Eyepiece AAU0166 (1) Total Half Ring AAU0167 (1) Total 1/4" x 3/4" Button Head Bolt BAE01524 (2) Total Note: Skip this page if the model being assembled is not a telescope with lens.

ECN 1153 & *PA1093 Page 3 of 5 Installation Instructions Model Telescope Part # Clamp Part # ZZUN4279 AAU0146 AAU0043 ZZUN4280 AAU0146 AAU0380 ZZUN4438 AAU0168 AAU0043 ZZUN4439 AAU0168 AAU0380 Detail D Step 6 Detail C Step 5 Telescope (refer to chart) Telescope Base AAU0147 (1) Total 2.38" O.D. Bushing AMC0151 (1) Total 1.73" O.D. Plastic Washer AMC0152 (1) Total 1" O.D. Flat Washer BAE0600 (1) Total 3/8" x 1-1/4" Button Head Bolt BAE0666 (1) Total 1/4" x 1" Button Head Bolt BAE01522 (4) Total 1/4" Flat Washer BAE0158 (8) Total 1/4" Lock Nut BAE0160 (4) Total Telescope Assembly Pipe Wall Mounting Bracket AUN2575 (1) Total Pipe Wall Clamp (refer to chart) (2) Total 3/8" Button Head Nut BAE0663 (2) Total 3/8" x 1-1/4" Button Head Bolt BAE0666 (2) Total 3/8" Flat Washer BAE0595 (2) Total Detail B Step 4

ECN 1153 & *PA1093 Page 4 of 5 __Notes Before You Begin: Do not over tighten bolts during assembly, only snug tighten them until assembly is complete. Carefully read and understand these installation instructions before you begin. Step 1: Before attempting to assemble your equipment, please review all installation information carefully. Should you experience any diffi culty during the installation process, please call us at the phone number shown on the last page of these instructions. Step 2: Separate and identify all components and hardware. Step 3: Assemble the telescope. Note: Skip this step if the model being assembled is not a telescope with a lens. See Detail A. Attach as shown. Fully tighten the connections. The eyepiece should turn easily within the assembly. Step 4: Attach the telescope to the base. See Detail B. Attach as shown. Fully tighten the connection. Step 5: Attach the telescope to the mounting bracket. See Detail C. Attach as shown. Step 6: Attach the bracket to the pipe wall barrier. See Detail D. Position the bracket on the proper side of the pipe wall barrier looking out from the structure. The telescope should extend above the pipe wall barrier with the eyepiece toward the deck. Attach as shown. Final Details. Step 7: Tighten all fasteners. Fully tighten all fasteners according to tightening torque specifi cations. Torque Specifi cations: Bolts and nuts - Snug tighten and then tighten an additional one half turn.

ECN 1153 & *PA1093 Page 5 of 5 Installation Instructions UN4438 - TELESCOPE PIPE WALL MOUNT (CH/EX) PART NO. DESCRIPTION QTY. AAU0043 CLAMP - STEERING WHEEL FOR 4" CENTERS 2 AAU0147 CASTING - TELESCOPE BASE (FULL MOTION) 1 AAU0166 CASTING - EYEPIECE 1 AAU0167 CASTING - RING HALF 2 AAU0168 CASTING - TELESCOPE MACHINED 1 AMC0151 BUSHING - 2.38" O.D. x .50" 1 AMC0152 WASHER - 1.73" O.D. x .38" w/HOLE 1 AMC0189 SILKSCREENED LEXAN LENS 1 AUN2575 BRACKET - PIPE WALL TELESCOPE MOUNT 1 BAE0158 WASHER - 1/4" SAE FLAT 8 BAE0160 NUT - 1/4"-20 HEAVY LOCK w/o NYLON CAP 4 BAE0595 WASHER - 3/8" SAE FLAT 2 BAE0600 WASHER - 1" O.D. FLAT 1 BAE0663 NUT - 3/8"-16 x 7/16" BUTTON HEAD 2 BAE0666 BOLT - 3/8"-16 x 1-1/4" BUTTON HEAD - SS 3 BAE01522 BOLT - 1/4"-20 x 1" BUTTON HEAD - SS 4 BAE01524 BOLT - 1/4"-20 x 3/4" BUTTON HEAD - SS 2 UN4439 - TELESCOPE PIPE WALL MOUNT (PM) PART NO. DESCRIPTION QTY. AAU0147 CASTING - TELESCOPE BASE (FULL MOTION) 1 AAU0166 CASTING - EYEPIECE 1 AAU0167 CASTING - RING HALF 2 AAU0168 CASTING - TELESCOPE MACHINED 1 AAU0380 CLAMP - STEERING WHEEL 2 AMC0151 BUSHING - 2.38" O.D. x .50" 1 AMC0152 WASHER - 1.73" O.D. x .38" w/HOLE 1 AMC0189 SILKSCREENED LEXAN LENS 1 AUN2575 BRACKET - PIPE WALL TELESCOPE MOUNT 1 BAE0158 WASHER - 1/4" SAE FLAT 8 BAE0160 NUT - 1/4"-20 HEAVY LOCK w/o NYLON CAP 4 BAE0595 WASHER - 3/8" SAE FLAT 2 BAE0600 WASHER - 1" O.D. FLAT 1 BAE0663 NUT - 3/8"-16 x 7/16" BUTTON HEAD 2 BAE0666 BOLT - 3/8"-16 x 1-1/4" BUTTON HEAD - SS 3 BAE01522 BOLT - 1/4"-20 x 1" BUTTON HEAD - SS 4 BAE01524 BOLT - 1/4"-20 x 3/4" BUTTON HEAD - SS 2 Bill of Materials UN4279 - TELESCOPE PIPE WALL MOUNT (CH/EX) PART NO. DESCRIPTION QTY. AAU0043 CLAMP - STEERING WHEEL FOR 4" CENTERS 2 AAU0146 CASTING - TELESCOPE BODY 1 AAU0147 CASTING - TELESCOPE BASE (FULL MOTION) 1 AMC0151 BUSHING - 2.38" O.D. x .50" 1 AMC0152 WASHER - 1.73" O.D. x .38" w/HOLE 1 AUN2575 BRACKET - PIPE WALL TELESCOPE MOUNT 1 BAE0158 WASHER - 1/4" SAE FLAT 8 BAE0160 NUT - 1/4"-20 HEAVY LOCK w/o NYLON CAP 4 BAE0595 WASHER - 3/8" SAE FLAT 2 BAE0600 WASHER - 1" O.D. FLAT 1 BAE0663 NUT - 3/8"-16 x 7/16" BUTTON HEAD 2 BAE0666 BOLT - 3/8"-16 x 1-1/4" BUTTON HEAD - SS 3 BAE01522 BOLT - 1/4"-20 x 1" BUTTON HEAD - SS 4 UN4280 - TELESCOPE PIPE WALL MOUNT (PM) PART NO. DESCRIPTION QTY. AAU0146 CASTING - TELESCOPE BODY 1 AAU0147 CASTING - TELESCOPE BASE (FULL MOTION) 1 AAU0380 CLAMP - STEERING WHEEL 2 AMC0151 BUSHING - 2.38" O.D. x .50" 1 AMC0152 WASHER - 1.73" O.D. x .38" w/HOLE 1 AUN2575 BRACKET - PIPE WALL TELESCOPE MOUNT 1 BAE0158 WASHER - 1/4" SAE FLAT 8 BAE0160 NUT - 1/4"-20 HEAVY LOCK w/o NYLON CAP 4 BAE0595 WASHER - 3/8" SAE FLAT 2 BAE0600 WASHER - 1" O.D. FLAT 1 BAE0663 NUT - 3/8"-16 x 7/16" BUTTON HEAD 2 BAE0666 BOLT - 3/8"-16 x 1-1/4" BUTTON HEAD - SS 3 BAE01522 BOLT - 1/4"-20 x 1" BUTTON HEAD - SS 4 1000 Buff alo Road • Lewisburg, PA 17837 www.playworldsystems.com For Customer Service, Call 800-233-8404 or 570-522-9800 OUTSIDE U.S.