TP-Link CPE610 Installation Manual
Text of the manual
Lightning & ESD Protection
Software Configuration
Logging in to the PharOS
Configuration for a Typical Application
Antenna Alignment
Specifications
FAQ
1
4
15
18
19
20
TP-Link's Pharos series outdoor CPEs are dedicated to outdoor
wireless network solutions. This guide is applicable to the product
CPE610.
Overview
Package Contents
1
Power Cord
Passive PoE Adapter
Installation Guide
CPE610
Installation Guide
Outdoor CPE
Pharos CPE
Center Reflector Panel
Side Reflector Panels
(Qty.2)
Bolts with Nut and Lock
Washer Assemblies
(M6×110, Qty.2)
Bolts with Nut and Lock
Washer Assemblies
(M6×70)
Rear Cover
Mounting Bracket
(For CPE)
Pole-mount Clamp
ST3×10 Self-tapping Screws
(Qty.2)
D3×28 Plastic Wall Anchors
(Qty.2)
Mounting Bracket
(For PoE Adapter)
Protective Cap
Bottom View
Hardware Overview
2
Reflector Assembly
Securing Arms
Bubble Level
Mounting Bracket
Pole-mount Clamp
Rear Cover
On: A device is connected to this port, but there
is no activity.
Flashing: A device is connected to this port, and
is active.
On: The CPE is powered on.
Panel Layout
On: The wireless function is enabled.
Passive PoE Adapter
Power LED
On: Power on.
Off: Power off.
Remote Reset
Press and hold for 5 seconds to reset the CPE
to its factory defaults.
RESET
Press and hold for 5 seconds to reset the CPE to
its factory defaults.
ETHERNET
The port is to connect to the POE port of the
provided PoE adapter for both data transmission
and power supply through Ethernet cabling.
