TP-Link RE600X Operation & User’s Manual

This guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick internet setup, while this guide contains details of each function and demonstrates how to configure them. Note: Features available in this range extender may vary by model and software version. Range extender availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual range extender experience. Conventions In this guide the following conventions are used: Convention Descripti ...

Method 1: Connect to the extender manually. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Method 2: Connect to the extender via WPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 6. 3. LED Explanation for the Access Point Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Chapter 7 Manage Your Extender 37 7. 1. Set System Time . . . . . . . . . . . ...

5. Click Save. • To enable or disable the extended network: 1. Go to Settings > Wireless > Extended Network. 2. Extended networks are enabled by default. If you want to disable the wireless function of a certain band, just clear the Enable checkbox. In this case, all the wireless settings of this band will be invalid. 3. Click Save. • To change the wireless network name (SSID): 1. Go to Settings > Wireless > Extended Network. 2. Create a new SSID in Extended 2.4GHz SSID or click Copy Host SSID. The value is case-sensitive. 3. Click Save. Note: If you hav ...

2. Select the device to be blocked in the Online Devices table by ticking the corresponding checkbox. 3. Click Block and the selected device(s) will be added to the Devices in Blacklist table. 4. Click in the Devices in Blacklist table to set the Effective Time for a certain entry as needed. 5. Click Save. • To permit specific device(s): 1. Select Whitelist and click Save. ...

This chapter guides you on how to configure network settings that are available for this extender. It contains the following sections: • Check Internet Status • Configure Wireless Network • Change LAN Settings • Adjust Wi-Fi Coverage • Set Access Control • Set High Speed Mode ...

5 3 Change LAN Settings The extender is preset with a default LAN IP 192.168.0.254, with which you can log in to the web management page. The LAN IP address, together with the Subnet Mask, also defines the subnet that the connected devices are on. If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > Network. 3. Select Use the following IP address. ...

This chapter introduces how to boost your host wireless coverage. Please follow the step-by-step instructions to set up the internet connection. It contains the following sections: • Power On the Extender • Set Up the Extender ...

1 2 1 LED Explanation You can check the extender’s working status by following the LED Explanation table. Name Status Indication (For Range Extender Mode) (Power) On/Off The extender is on or off. Blinking The system is starting up or firmware is being upgraded. (Signal) Solid blue The extender is connected to your router’s wireless network and is in a suitable location. Solid red The extender is receiving a weak signal. Try relocating it closer to your host router. Blinking WPS connection is in progress. Off No wireless connection is establish ...