Walker Edison BU58TESSW Assembly Instructions Manual
Read Online
Read the Walker Edison BU58TESSW Assembly Instructions Manual online using the built-in PDF viewer.
Text of the manual
Please visit our website for the most current instructions, assembly tips, to report damage
or request parts. www.walkeredson.com
Copyright © 2018, by Walker Edson Furniture Co., LLC, All rights reserved.
Revised 02/2021
14x14mm Cam Lock
09 pcs
09 pcs
5,5x28mm Cam Bolt
4,0x3
mm
0
4,0x40 mm
09 pcs
8,0x30 mm
04 pcs
02 pcs
02 pcs
Shelf support
Knob
33 pcs
D
3,5x30mm
01 pc
E
F
G
H
I
6mm
01 pc
02 pcs
01 pc
01 pc
3,5x16mm
V
W
X
Y
Z
Plastic Anchor
Washer
Strip
H1
J
L
M
02 pcs
16 pcs
22 pcs
K
02 pcs
P.4
Touch closure
H3
H4
H2
Hinge
Hinge
H5
3,5x16 mm
3,5x16 mm
Insert wooden dowel (F) into
part (2),(3),(4),(9),(11),(13) and (14)
Fixing hardware (H1) in the (H2)
according to diagram.
Attach cam bolt (A) into part (1).
Attach touch closure (H2) in the pre drilled
side of part (1) using screw (H3).
Push
1
st
2
nd
1
st
2
nd
Secure part (4) to part (6) with screw (E)
Secure part (2) and (3) to part (6)
with screw (E)
Secure part (11) to part (6) with screw (D).
Secure part (1) to parts (2,3 and 4)
using minifix cam lock (B).
Secure parts (9) to part (6) withscrew (D).
Secure back panel (8, 10) to body with screws (M).
5
G
G
G
G
G
04
Insert suport (G) to part (3) and (4).
10
10
Attach parts (13,14) to part (12), insert
panel (15) into groves. Secure part (16)
into parts (13,14,15) with screw D.
H5
H4
L
L
L
L
J
J
7
J
02
08
02
02
L
H5
H4
K
02
Attach hardware (J) and (J) to part (7)
Right with screw (L). Attach hardware (K)
and (K) to part (7) left with screw (L).
H4
H5
L
L
K
K
7
L
L
D
D
D
D
2X
16
Secure doors (7) to body with screw (L).
Insert knob (I) with screws (C).
Insert wood dowel (F) right on left
side drawer.
Hardware of Wall Anchor
Ø6mm
V
Y
X
Z
W
01
01
02
01
01
WARNING: CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING.
WARNING
Top
Wall
2nd
X
W
V
Back panel
Top
1st
Z
X
Y
Wall anchor and hardware are included with this product.
Please make sure hardware is suitable for your walls before installing,
as different wall materials may require different types of anchors.
Serious or fatal injuries can occur from furniture tipping over.
To prevent the furniture from tipping over we recommend
that it is permanently fixed to the wall.
To maintain long term performance and easy gliding of your solid wood drawers,
we recommend applying wax to the wooden guide rails.
1. Bee's wax is recommended or Paraffin wax from a standard candle can be used.
2. Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood
contact when opening and closing the drawer. (Wax should be room temperature, do
not melt the wax onto the wood).
3. Wax should be applied every few months for the first year and then only when
needed after that to keep the drawers sliding smoothly.
Assembly Complete!
