VESA AVLT-MT37-1 Quick Start Manual

Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged. Do not use damaged or defective parts. Carefully read all instructions before attempting installation. IMPORTANT SAFETY INFORMATION If you don't understand these directions or have any doubts about the safety of the installation. Install and operate this device with care. Please read this instruction before beginning the installation, and carefully follow all instructions contained herein. Use proper safety equipment during installation. Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaim any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product. If you are uncertain about the nature of your wall, consult a qualified installation contractor. Please call a qualified installation contractor for help if you: Note: The mounting components and hardware supplied in this package are not designed for installations to walls with steel studs or to cinder block walls. If the hardware you need for your installation is not included, please consult your local hardware store for proper mounting hardware for the application. VESA Adapter Samsung SB350, SC300, SD300, SA100,SB150 Series AVLT-MT37-1 AP4-0088A Samsung 932BW P2770FH PX2370 S20B350H S20C300BL S20D300H S22A100N S22B150N

(4)M4x12 Thumb Bolt-b 1 2 Position the base clip on the Adaptor Bracket (a) and insert the screw from step one into the center hole in the bottom of bracket. May need adding addtitonal washers (c). Connect the VESA plate to the Adaptor Bracket (a) using 4pc M4X12 Thumb Bolts (b). Remove the screw in the bottom of the base, and detach the base from the monitor. Step1 Remove Monitor Base Step3 Connect the Adaptor Bracket to VESA Plate Step2 Attach Adaptor Bracket to Monitor a b (1)Adaptor Bracket-a (4)M6 Washer-c