WALDIS CAWI SMARTCAM Operating Instructions Manual

Text of the manual

Electronic door lock for WA safes

Issue 08.2020

Thank you very much ❤

We would like to thank you for choosing Waldis when it comes to safety. When buying a safe, you have chosen a product tested according to EN1143-1. A Swiss quality product with VdS - tested security. Please read these instructions carefully before commissioning your safe! Your contact for questions WALDIS Tresore AG Hofwisenstrasse 20 CH-8153 Rümlang Phone: +41 43 211 12 00 Fax: +41 43 211 12 12 E-Mail: [email protected]

Table of contents is

Safe lock ................................................................................................................ 1 1.1. General notes .................................................................................................. 1 1.1.1. Notes ......................................................................................................... 1 Code Programming ................................................................................................ 2 1.2. Variants ........................................................................................................... 2 1.2.1. Opening with the user code ...................................................................... 2 1.2.2. Closure of the castle ................................................................................. 2 1.2.3. User code programming ............................................................................ 3 1.2.4. Open with master code ............................................................................. 3 1.2.5. Changing the master code ........................................................................ 4 Power supply .......................................................................................................... 5 1.3. Things to know about the power supply .......................................................... 5 1.4. Choose password ............................................................................................ 5 1.4.1. Basic rules when choosing a password .................................................... 5

1.1. General notes

1.1.1. Notes • On delivery, the lock is set to the following factory codes: User factory code: 1-1-1-1 Master factory code: 1-2-3-4-5-6 For your safety, you should change these factory codes immediately. Make all code changes only when the safe is open • When changing the user code/master code, the lock must first be opened with the respective valid user code/master code. • Do not use personal information such as birthdays or phone numbers for your new codes. • If the time period for entering a new code is exceeded, the electronics switch off. The old code remains valid. • Each correct key input during opening and closing is confirmed by a sound signal and a red flashing of the LED. These signals are not considered in the further instructions. • Never use force. • Never open the lock housing. Otherwise, you will endanger the function of the lock and lose any warranty claims.

Attention:It is essential to reprogram the original opening code (master code 1) 0

0 1 2 3 4 5 6, as a third party could know this factory code and the safe could be opened. All code reprogramming must be performed with the door open. 1.2.1. Opening with the user code 1. Enter your 4-digit user code e.g.: 1 1 1 1 2. Turn the rotary knob to the "Open" position within 3 seconds. The lock is open. 1.2.2. Closure of the castle 1. Close the door on the safe and press any key. Turn the rotary knob to the "Closed" position within 3 seconds. The lock is closed.

1.2.3. User code programming

1. Press and hold the "0" key for approx. 3 seconds. When the key is released, the green LED lights up continuously. 0 2. Enter the following digit for the type of change. 0 by the master or 1 by the user 3. Enter your 6-digit master code or enter the existing 4-digit user code e.g., User. 1 2 3 4 5 6 or 1 1 1 4. Enter the new 4-digit user code e.g., 1 2 3 4 5. Enter the new 4-digit user code again e.g., 1 2 3 4 6. The new user code is accepted. 1.2.4. Open with master code 1. Press and hold the "8" key for approx. 3 seconds. When the key is released, the green LED lights up continuously. 8 2. Enter your 6-digit master code e.g., 1 2 3 4 5 6 3. Turn the rotary knob to the "Open" position within 3 seconds. The lock is open.

1.2.5. Changing the master code

Changing the master code is only possible when the lock is open. 1. Press and hold the "2" key for approx. 3 seconds. When the key is released, the green LED lights up permanently. 2 2. Enter your old 6-digit master code e.g., 1 2 3 4 5 6 3. Enter your new 6-digit master code e.g., 3 3 2 2 1 1 4. Enter your new 6-digit master code again e.g., 3 3 2 2 1 1 5. The new master code is accepted.

1.3. Things to know about the power supply

The lock is powered by a 9 V alkaline block battery (no rechargeable batteries!). If the battery charge is insufficient, a warning tone will sound several times in succession after the code is entered and the red LED will flash several times. Change the battery as soon as possible. Remove the black battery compartment cover and pull the battery out of the battery compartment. The programmed codes are retained during battery replacement. Please always dispose of used batteries in an environmentally friendly manner. Password 1.4. Choose password 1.4.1. Basic rules when choosing a password 1.4.1.1. Avoid the obvious passwords • No trivial values like 000000, 000815, 123456 • Do not use your own birthday, car license plate, phone number or name (your own, wife/husband, children, pets, company, place of residence, etc.) as password. No standard passwords like: "safe". Writing backwards is also too easy. • Important passwords should be reconstructable 1.4.1.2. How to create a secure password? • The first rule: A password is only secure if it remains secret! • Remember passwords - don't write them down anywhere! • Consider all keys if possible (wear marks on the keyboard betray the individual numbers over time) 1.4.1.3. Last but not least Consider how the password will still be retained if the owner can no longer disclose the password (e.g., in the event of death). Leave a sealed envelope with your notary.

Notes _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________

Other Door locks Manuals