Shanty 2 CHIC Turned Leg Console Table Manual 

Copyright © 2014 Shanty-2-Chic.com Supply List Item Quantity Description 13-1/2” x 30” x 3/4” plywood 1 For the lower shelf 1 x 6 x 6’ 3 Pine or whitewood board 1 x 4 x 6’ 2 Pine or whitewood board 1 x 2 x 6’ 2 Pine or whitewood board 1-1/4” pocket hole screws 104 Brad nails handful Optional for attaching the lower trim 2” x 2” x 30” turned legs 6 A link to the legs we used can be found on our website Wood glue Finish of choice

shanTy-2-ChiC.Com Drill pocket holes for 1-1/4” pocket hole screws as indicated by the arrows. Use wood glue at every joint in this project.

shanTy-2-ChiC.Com Attach the lower trim pieces to the lower shelf. Make sure the top sides are flush. This table will be built upside down. Start the assembly with the legs and the top rails. Make sure the pocket holes to attach the top panel are facing the right direction. Attach all of the rails so that the outside faces is inset 1/4” from the outside faces of the legs. Attach the lower shelf with pocket hole screws through the plywood panel and the trim boards.

shanTy-2-ChiC.Com Glue and assemble the planked top. Carefully place the base assembly on the top panel and secure it with pocket hole screws. Sand and finish as you wish. Be sure to personalize your console to add your own touches. After your done stop by our website and let us know! We love seeing what you can come up with too!