Vera Vistacam 700 Install And Setup
Text of the manual
Install and Setup Vistacam 700
This guide will teach you how to:
•
Mount and install your Vistacam 700 camera
•
Setup your Vistacam 700 wirelessly
1. Firmly press the blue WPS button once, located on the back of the VistaCam 700
2. The network LED will blink amber, indicating that the pairing process has started On
the Vera unit, press the Select button until the Wi-Fi LED blinks Press the Sync button to
confirm the selection and go to WPS mode.
3. After a minute, the green power LED on
NOTE: The LED will first turn on and then start blinking. It will blink during startup, which
will take about a minute. After the startup is completed, the green LED should remain
ON.
Mounting and Installation
NOTE: Please ensure that the Wireless Full HD IP Camera is configured and added to the
network before mounting it.
1. Identify the location for mounti
