Toshiba NV Series Instruction Manual

6F8C1361 12 2.4 Replacing the Module CAUTION Turn off the basic unit. When replacing the module, turn off the basic unit and make sure that the power is off. Otherwise, failure of the module or electric shock may occur. Mandatory When changing the switch settings or in case of failure, replace the module in the following steps. Turn off the basic unit. Make sure that it is off by using LED display. Hold the hook of the modular connector of the module, and remove the Category 6/Category 5e twisted pair cable. Loosen the screws at the top and bottom of the ...

6F8C1361 30 3.3.2 Multicast address setting Set the multicast address in the following steps. Set the number of multicast addresses to register to the multicast registration count. The setting range is from 0 to 15. "0" indicates not used (1 in this example). Register the multicast IP address. Available addresses are from 224.0.0.0 to 239.255.255.255 (239.128.0.1 in this example). Remark • To register multicast addresses, align them to the top. Figure 3-17 An example of multicast address setting When the registration is complete, click [Download (D)]. ...

Unified Controller nv series Ethernet (FN812) Module Operation Manual 21 3.3.1 Network parameter setting Set the network parameters of the FN812 in the following steps. Select the FN812 module from the product tree. Select [Station] under the created system, and select [New (W)] from [File (F)] on the menu bar. Figure 3-3 Station registration screen Set the station name. Select "nv station" from Station model name, and set the station name ("Stn1" is set in this example). Figure 3-4 Station name setting screen ...

Unified Controller nv series Ethernet (FN812) Module Operation Manual 55 A.2 Ethernet Transmission Specifications Table A-2 Ethernet transmission specifications Item Specification Applicable standard IEEE 802.3ab •1000BASE-T Media access method CSMA/CD method Data transmission speed 10Mbps/100Mbps/1Gbps Ethernet frame DIX type Topology Star shape Transmission path Redundant bus Transmission cable/cable length Category 6/Category 5e Twisted pair cable: Max.100m No. of stations Max. 64 stations/system (note) Interface RJ-45 connector (Note) 32×2 for ...

6F8C1361 32 3.4 Network Information 3.4.1 LAN control information In the system view, select the FN812 module, and select [LAN management information (N)] from [Tool (T)] on the menu bar. Figure 3-19 System view screen ...

6F8C1361 60 Table C-1 Related products Product name Rating Remark RS-232C cable 9-pin D-sub Standard length 5m ...

6F8C1361 44 The FN812 module expands the state information by socket used by the user application as well as diagnosis information of the transmission path to the FN812 modules within the same network on the station bus. Information by socket includes information by single Ethernet socket. The configuration of application information on the station bus is as shown below. Access from the controller Reserved by the system FN state information (％NW13. CntBase + 130400)←B system (％NW13. CntBase + 130656)←A system Redundant Ethernet information by socket EN ...