Toshiba NV Series Instruction Manual

6F8C1358 62 A.1 General specifications Table A-1 General specifications Specification Item EN811 Operating temperature range (product ambient temperature) 0 to 55°C Operating humidity range 10 to 95%RH (no condensation) Storage temperature range －40 to 70°C Storage humidity range 5 to 95%RH (no condensation) Power voltage range 4.75 to 5.25VDC (Rating: 5.0VDC) Current consumption (when rated power is fed) 2A or less (5.0VDC) Power consumption (when rated power is fed) 10W or less Dust 0.3mg/m3 or less (no conductive dust) Vibration resistance 5≤f<9: half ampl ...

81 Variable definition (TCP reception) VAR OPEN_COMPLETE: BOOL; OPEN_ERROR: BOOL; OPEN_REQ: BOOL; RX_COMPLETE: BOOL; RX_ERROR: BOOL; RX_REQ: BOOL; CLOSE_COMPLETE: BOOL; CLOSE_ERROR: BOOL; CLOSE_REQ: BOOL; RCV_STATUS: INT; CLOSE_STATUS1: INT; TR_DATA: ARRAY[0..512] OF WORD; T_O: typeTCP_OPEN; T_R: typeTCP_RCV; T_C: typeTCP_CLOSE; URCV_N_1: URCV_N; USEND_N_1: USEND_N; USEND_N_3: USEND_N; OPEN_STATUS1: INT; TR_DUMMY: WORD; T_SK_CMD: typeTCP_SEND; T_SOCKET: URCV_N; T_SK_REQ: BOOL; T_SK_COMP: BOOL; T_SK_ERR: BOOL; T_SK: INT; T_ ...

6F8C1358 4 1.2 Names and functions of the parts 1.2.1 Names of the parts Figure 1-2 shows the names of the parts of the EN811 module. Figure 1-2 Names of the parts of the EN811 module State display LED • RUN • ERR • L-A • HLTH Station address setting switch • STNH • STNL Operation mode setting switch • MODE Serial communication port • TOOL Ethernet modular connector Status display LED • LNK-A • ACT-A Transmission speed display LED • 1G-A • 100M-A ...

Unified Controller nv series Ethernet (EN811) Module Operation Manual 19 3.2.2 Station address Use the station address setting switches to set the station address. Any station address can be set; however, it must be unique within the system. The available setting range for station addresses is from 01(h) to FE(h)(1 to 254). When the IP address type is [Tool setting], it has precedence over the value of the station address setting switches. In this case, it is recommended matching the lowermost value of the specified IP address (5 in the case of 172.16.64.5) and ...

6F8C1358 76 • Variation definition (UDP reception) VAR OPEN_COMPLETE: BOOL; OPEN_ERROR: BOOL; OPEN_REQ: BOOL; RX_COMPLETE: BOOL; RX_ERROR: BOOL; RX_REQ: BOOL; CLOSE_COMPLETE: BOOL; CLOSE_ERROR: BOOL; CLOSE_REQ: BOOL; RCV_STATUS: INT; CLOSE_STATUS1: INT; UR_DUMMY1: WORD; UR_DUMMY2: UINT; UR_SIZE: UNIT; UR_DATA: ARRAY[0..512] OF WORD; URCV_N_1: URCV_N; USEND_N_1: USEND_N; OPEN_STATUS1: INT; U_O: typeUDP_OPEN; U_R: typeUDP_RCV_BC; U_C: typeUDP_CLOSE; T_SK_CMD: typeTCP_SEND; T_SOCKET: URCV_N; T_SK_REQ: BOOL; T_SK_COMP: BOOL; T_SK_ERR: BOOL; T_SK: INT; T_SK_SOCKET: INT ...

6F8C1358 62 A.1 General specifications Table A-1 General specifications Specification Item EN811 Operating temperature range (product ambient temperature) 0 to 55°C Operating humidity range 10 to 95%RH (no condensation) Storage temperature range －40 to 70°C Storage humidity range 5 to 95%RH (no condensation) Power voltage range 4.75 to 5.25VDC (Rating: 5.0VDC) Current consumption (when rated power is fed) 2A or less (5.0VDC) Power consumption (when rated power is fed) 10W or less Dust 0.3mg/m3 or less (no conductive dust) Vibration resistance 5≤f<9: half ampl ...

6F8C1358 50 The EN811 module expands the state information by socket used by the user application as well as diagnosis information of the transmission path to the EN811 modules within the same network on the station bus. Information by socket includes information by single Ethernet socket. The configuration of application information on the station bus is as shown below. Access from the controller Reserved by the system EN state information (%MW13. CntBase + 130656) Reserved by the system Transmission path diagnosis result EN_NODEMAPA_* (%MW13. CntBase + 13091 ...

6F8C1358 86 The return codes related to EN811 are shown below. The return codes are outputted via the communication FB. For detailed explanation of the communication FB, refer to "Toshiba Integrated Controller V series/Unified Controller nv series Instruction Word Manual (LD/FBD/SFC/ST)(6F8C1226)." The following table shows the error codes that occur in the USND_N/URCV_N command request. Table F-1 USND_N/URCV_N command error code list Return value Description -5000 Communication command request count exceeded -5001 Command type error -5002 Reception timeout -5003 ...