Toshiba NV Series Instruction Manual

of the product and its application. It shall not be construed that our company or third party will guarantee to use the intellectual property or other rights concerning the said information or grant the license. (2) Unauthorized reproduction of this Instruction Manual in whole or a part is prohibited. (3) The contents of this document subject to change without prior notice. (4) We extended all possible means to ensure the contents of this Instruction Manual, however, if you have any q ...

73 A.2 FN812S The following table shows the Ethernet transmission specifications of the FN 812S. Item Specification Applicable standard IEEE 802.3ab 1000BASE-T Media access method CSMA/CD method Data transmission speed 10Mbps/100Mbps/1Gbps Ethernet frame DIX type Topology Star shape Transmission path Redundant bus Transmission cable/cable length Category 6/Category 5e Twisted pair cable: Max.100m No. of stations Max. 64 stations/system (note) Interface RJ-45 connector (Note) 32×2 for a redundant station. This section describes the ...

6F8C1865 16 Select the installation target and click the [Next >] button. Confirm the installation destination directory and click [Next >]. Click the [Yes] button. Click the [OK] button. This completes the installation. Figure2.1. Installation ...

xiii Chapter 1 Secure System …1 1.1 Outline ········································································ 2 1.2 System Configuration ··················································· 3 1.3 Constraints and operational conditions ··························· 5 1.4 Secure package configuration ······································· 8 ...

6F8C1865 24 Select [Advanced system settings] to open the System Properties. Figure3.2. System Properties Select the [Remote] tab, make sure [Don’t allow connections to this computer] is selected, and click the [OK] button. Note If [Don’t allow connections to this computer] is not selected, select [Don’t allow connections to this computer] and click the [OK] button. ...

61 4.3.3 Tool mode The tool mode is for nV-Tool to authenticate with an authentication server. In the tool mode, you can edit the authentication client configuration information file and display the authentication status of the authentication server. However, since there is no function to automatically detect the authentication server, the authentication status will be displayed according to the judgment of nV-Tool. The following figure shows each part of the authentication screen of the tool mode. (2)User ID (3)Password (4)Notifica ...