Eiki LC-WXL200 Owner's Manual

A  It is possible to update the firmware through the network. It is required to have a special tool for the updating. For further information please consult your local deal- er. The version number of the firmware is indicated on the lower part of the "Initial setting" page. Version of the firmware ...

trast. (0~ 63) Brightness..........................Adjusts picture bright- ness. (0~ 63) Color.......................................Adjusts picture color saturation. (0~ 63) Tint..........................................Adjusts picture hue. (0~ 63) Color temp.........................Sets a color temperature mode. (XLow, Low, Mid, High, Adj.) White Balance Red, Green, Blue......Adjusts each white balance respectively. (0~ 63) * When changing the value of the white balance, the color temp. indicates " ...

Web browser setting This projector is designed to be set up and controlled from an Internet web browser. Depending on the preference settings of the web browser, some control functions may not be available. Please make sure that the following functions are set up properly in the web browser. Active Script/JavaScript enable There are some control items used with the JavaScript function in the setting pages. If the web browser is set not to use this JavaScript function, it may not control the projector properly. In this case, the warning message "Make sure JavaScript is ON. ...

The limitation*1 of connection between the projector and hub or computer Suitable LAN cables are limited by length and type as follows; Connection Type of usable LAN cable Maximum length Projector - Hub UTP Straight Cable with category 3 or 5 *2 100m Projector - Computer UTP Cross Cable with category 3 or 5*2 100m *1 There may be other limitations depending on your network environment or LAN specification. Please consult your network administrator for further details. *2 Category of LAN cable indicates the cable quality. Normally, a cable with category 3 or 5 is used ...

Netscape Navigator v.7.1 JavaScript Setting Select Preference from Edit menu on the web browser and then selec t the item Advanced/Scripts & Plugins in the Category column. Make sure that the Enable JavaScript for Navigator is checked. Proxy setting Select Preference from Edit menu on the web browser and then select the item Advanced/ Proxies in the Category column. Properly set up your web browser's the proxy server set- tings according to the local area network environment to which the projector is connected. - Using proxy server When you use an external intern ...

Sound This function is to adjust the sound of the projector. The values in the text box repre- sent the current control value or status. Item Description Volume....................Adjusts the sound volume from the speaker. (0 ~ 63) Mute..........................Suppresses the sound. (ON, OFF) Built-in SP...............Suppresses the built-in speaker. (ON, OFF) ...

This is to set the Network PIN code to restrict the access from an unauthorized person through the network. Enter a 4-digit number as the Network PIN code onto the text box and click Set button. The projector begins restarting and it takes about 10 seconds. Close (Quit) the web browser and access to the login page again in 10 seconds. This is to perform the login authentication firmly. The default Network PIN code [0000] means no Network PIN code is set. ✐ When you connect the projector to the network, it is recommended to set a new Netwo ...