SEGUE RE-1068 Setup Instructions
Text of the manual
DO NOT USE POWER TOOLS
ALL CONNECTIONS MUST
BE TIGHTLY SECURED
Part Identification - Numbering
Spline Connection
Base Plate & Extrusion Connection
General Setup Instructions
- Read entire setup instruction manual prior to
unpacking parts and pieces.
- The setup instructions are created specifically
for this configuration.
- Setup instructions are lai
1) Locate channels along the edges of extrusions
2) Insert graphic corners first into channels then center
point of graphic into channels. Allows for proportional
fit around the perimeter of the extrusion.
3) Working from center to corner, slide silicon edge
on graphic into channel.
4) After all edges of graphic have been inserted into
channels, step
Straight Bracket Assembly
1) Slide TWO-PIECE TS RV 4 straight bracket into
Interior Center Slot of extrusion, so that two of the
set screws are inside groove. Tighten two set screws
to secure.
3) Slide connecting extrusion over exposed ends of
bracket & connector. Tighten all remaining set screws
to secure extrusions.
2) Slide
Step 1 of 3
RE-1068
7
7
8
1
2
3
3A
2A
1A
5A
4A
5
4
6
6
10
11
9
9A
Item
1,1A
2,2A
3,3A
4,4A
5,5A
6,6A
7
8
9,9A
10
11
Qty.
1,1
1,1
1,1
1,1
1,1
1,1
2
1
1,1
1
1
Description
33.6754” CEI110 Horizontal Extrusion
33.6753” CEI110 Horizontal Extrusion
33.6753“ CEI110 Horizontal Extrusion
45.6185” CEI110 Vertical Extrusion
45.6185” CEI110 Vertical Ex
