Vallox Pureo Manual 

Vallox Pureo Control USING THE UNIT Pressure control Air volume control IMPORTANT Pressure control requires external duct pressure sensors. ...

ALARM CLASS 1 CAUSE Supply air sensor (UI3) The supply air sensor has become damaged. Supply air sensor / duct (UI9) The supply air sensor located inside the duct has become damaged. Heating radiator sensor, return water (UI6) The sensor that measures the return water temperature has become damaged. Emergency stop External emergency stop has become activated. Extract air fan The extract air fan has stopped. Supply air fan The supply air fan has stopped. Fire hazard - supply air The supply air temperature is too high. Fire hazard - extract air The extract ...

Vallox Pureo Control INTRODUCTION BUTTON DESCRIPTION CONTROL PANEL BUTTONS NOTE The Vallox Pureo Control panel contains the buttons described in the adjacent table. The control panel has a touch screen. On/off status button provides more information of the unusual running status of the unit. The Back button takes you backwards in the menu. The Left arrow button takes you leftward in the menu. The Right arrow button takes you rightward in the menu. Press the OK button to confirm selection or to acknowledge active alarms. Press the Cancel button to cancel ...

Vallox Pureo Control USING THE UNIT USING THE UNIT VENTILATION SPEED SETTINGS Ventilation speed is controlled by pressing the fan symbol on the display. The available speed options are slow, fast, and week clock. NOTE The week clock is activated from the week clock menu; the week clock icon is not shown on the main display at other times. Slow Fast Week clock If the running status of the unit deviates from the setting shown on the control panel, the on/off status information icon will appear in the right top corner of the control panel. The on/off status o ...