Philips MCM158/55 Quick Start Manual

What’s in the Box? You should find these items upon opening the box. MCM158 1 Quick Start Guide 2 User Manual Quick Start Guide User manual ALB/ PRESET 3 1 2 Remote Control

Connect the power cord of the system to the AC power outlet. Tip: It is unnecessary to connect the FM pigtail antenna since it is fixed to the main unit. speaker (right) speaker (left) FM wire antenna AC power cord FM AERIAL AU HEADPHO X E 2 1

In standby mode, press and hold CLOCK/DISPLAY on the remote control set for 2 seconds. Press PROG to select 12-hour or 24-hour display. Press CLOCK/DISPLAY to confirm. ➜ The clock digits for the hours flash. Press TUNING 4 ¢ (à / á on the remote control) to set the hours. Press CLOCK/DISPLAY again. ➜ The clock digits for the minutes flash. Press TUNING 4 ¢ (à / á on the remote control) to set the minutes. Press CLOCK/DISPLAY to confirm the time. 6 7 1 2 3 4 5 Playing a disc Select CD source. Lift the CD door on the top of the system to open the CD compartment. Insert a disc with the printed side facing up and press down on PULL TO OPEN to close the CD door. PressÉÅto start playback. Press 9 to stop playback. PROG. ALB/ CLOCK/DISPLAY PRESET CLOCK/DISPLAY PROG. PROG. ALB/ CLOCK/DISPLAY PRESET

All rights reserved. http://www.philips.com PDCC-JH/ZYL-0823 Tip: Detailed playback features and additional functions are described in the accompanied owner's manual. 1 2 Select TUNER source. Press PROG on the remote control for more than two seconds to program all available stations in order of waveband. Press ALBUM/PRESET +/- until the desired preset station is displayed Programming and tuning to radio stations 3 Notes for the remote control: – First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or AUX, for example). – Then select the desired function ( 2;, í, ë for example).