Ross neo Manual 

bolts onto the mount. 7 LN2SA200 Tilt & turn TV wall mount Whilst every effort has been made to ensure that the provided screws are suitable for connecting the mount to the vast majority of TV brands and models, Ross cannot be held responsible on the rare occasion that the supplied screws are not sufficient. Contact us for more information at [email protected] x1 x2 x4 x4 Easy installation: Scan for installation video For more information visit: www.ross.uk D x4 E x1 F x1 G SET INCLUDES x4 M4 H 1 2 x4 H H 8 x4 1 x4 I H 3 x4 H 4 x4 H 5 x4 6 x4 H M4 M5 M5 M6 M6 7 x4 H M8 M8 I 2 x4

the bracket. 1 2 3 4 5 6 When selecting the position of the TV mount ensure that it is fixed onto a wooden joist or onto a solid wall. Mark the wall where the fixing locations are ensuring that the mount will be mounted on to a flat surface and is level. Clip the covers (G) onto the base of the unit. Using the provided Allen key (D) tighten the up the two angling bolts to the appropriate angle required. Hold each side of the TV with the hooks facing away from you. Provided select the appropriate ones to hold the hooks (H) onto the TV. Ensuring that the mounts are facing the the top end of your TV screw the mounts onto the TV ensuring not to over-tighten. Using the provided self taping screws (B) type. Holding the TV mount starting in the one corner, screw the provided screws (B) into a wooden joist fixing the opposite corners, until the mount is secure onto the wall. Ensure all are tight and secure. When selecting the position of the TV mount. ensuring that the mount will be mounted on to a flat surface and is level. Mark the wall where the fixing locations are. Drill the holes using a 10mm masonry bit. Using a hammer knock the the wall plugs (C) provided into the wall. Holding the TV mount start in the one corner screw the provided screws (B) into the wall fixing the opposite corners until the mount is secure onto the wall. Ensure all are tight and secure. Ensure that the mount is fixed to a solid object and not into plasterboard on its own. Slide the TV onto the bracket ensuring that the TV is centered onto the mount.