Philips DCD3020/58 Operation & User’s Manual

www.philips.com/welcome Always there to help you Příručka pro uživatele 31 Felhasználói kézikönyv 89 Príručka užívateľa 151 Användarhandbok 211 User manual 3 Brugervejledning 61 Instrukcja obsługi 119 Käyttöopas 183 Question? Contact Philips

6 Introduction 6 What's in the box 6 Overview of the main unit 7 Overview of the remote control 8 3 Connect 10 Place the unit 10 Connect speakers 10 Connect FM antenna 10 Connect audio cables 10 Connect video cables 11 Connect an external audio device (optional) 11 Connect power 12 4 Get started 12 Prepare the remote control 12 Turn on 13 Set clock 13 Adjust brightness of display panel 13 Find the correct viewing channel 13 Select the correct TV system 14 Change system menu language 14 Turn on Progressive Scan 14 5 Play 15 Play a disc 15 Play from USB or recored discs 16 Play a slideshow with background music 16 Play control 16 Play options 17 Picture view options 17 6 Play iPod/iPhone/iPad 18 Compatible iPod/iPhone/iPad 18 Load the iPod/iPhone/iPad 18 Charge the iPod/iPhone/iPad 18 Listen to the iPod/iPhone/iPad 19 Remove the iPod/iPhone/iPad 19 7 Listen to radio 19 Tune to a radio station 19 Program radio stations automatically 19 Program radio stations manually 20 Tune to a preset radio station 20 8 Adjust sound 20 Adjust volume level 20 Select a sound effect 20 Mute sound 20 9 Adjust settings 21 General setup 21 Audio setup 21 Video setup 21 Preferences 22 10 Other features 23 Activate demonstration mode 23 Set alarm timer 23 Set the sleep timer 24 Listen to an audio device 24 Listen through headphone 24 11 Product information 25 Specifications� 25 Supported disc formats 26 USB playability information 26 12 Troubleshooting 27 13 Notice 29

material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The 'exclamation mark' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING:�To�reduce�the�risk�of�fire�or�electric� shock, the device should not be exposed to rain or�moisture�and�objects�filled�with�liquids,�such� as vases, should not be placed on the device. CAUTION: To prevent electric shock, fully insert the plug. (For regions with polarized plugs: To prevent electric shock, match wide blade to wide slot.) Important Safety Instructions •� Follow all instructions. •� Heed all warnings. •� Do not use this apparatus near water. •� Clean only with dry cloth. •� Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. •� Do not install near any heat sources such as radiators, heat registers, stoves, or other�apparatus�(including�amplifiers)�that� produce heat. •� Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. •� Only�use�attachments/accessories�specified� by the manufacturer. •� Use only with the cart, stand, tripod, bracket,�or�table�specified�by�the� manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. •� Unplug this apparatus during lightning storms or when unused for long periods of time. •� Refer�all�servicing�to�qualified�service� personnel.�Servicing�is�required�when� the apparatus has been damaged in any way, such as power-supply cord or plug is�damaged,�liquid�has�been�spilled�or� objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. •� Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: •� Install all batteries correctly, + and - as marked on the unit. •� Do not mix batteries (old and new or carbon and alkaline, etc.). •� The batteries shall not be exposed to excessive�heat�such�as�sunshine,�fire�or� the like. •� Remove batteries when the unit is not used for a long time. •� Apparatus shall not be exposed to dripping or splashing.

apparatus�(e.g.�liquid�filled�objects,�lighted� candles). •� Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Risk of overheating! Never install this apparatus in�a�confined�space.�Always�leave�a�space�of� at least four inches around this apparatus for ventilation. Ensure curtains or other objects never cover the ventilation slots on this apparatus. Warning • Never remove the casing of this unit. • Never lubricate any part of this unit. • Place�this�unit�on�a�flat,�hard�and�stable�surface. • Never�place�this�unit�on�other�electrical�equipment. • Only use this unit indoors. Keep this unit away from water,�moisture�and�liquid-filled�objects. • Keep�this�unit�away�from�direct�sunlight,�naked�flames� or heat. • Never look into the laser beam inside the unit. Hearing safety Caution • To prevent possible hearing damage, do not listen at high volume levels for long periods. Listen at a moderate volume. •� Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss. •� Sound can be deceiving. Over time your hearing 'comfort level' adapts to higher volumes of sound. So after prolonged listening, what sounds 'normal' can actually be loud and harmful to your hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there. To establish a safe volume level: •� Set your volume control at a low setting. •� Slowly increase the sound until you can hear it comfortably and clearly, without distortion. Listen for reasonable periods of time: •� Prolonged exposure to sound, even at normally 'safe' levels, can also cause hearing loss. •� Be�sure�to�use�your�equipment�reasonably� and take appropriate breaks. Be sure to observe the following guidelines when using your headphones. •� Listen at reasonable volumes for reasonable periods of time. •� Be careful not to adjust the volume as your hearing adapts. •� Do not turn up the volume so high that you can't hear what's around you. •� You should use caution or temporarily discontinue use in potentially hazardous situations. Do not use headphones while operating a motorized vehicle, cycling, skateboarding,�etc.;�it�may�create�a�traffic� hazard and is illegal in many areas.

Micro Theater Congratulations on your purchase, and welcome�to�Philips!�To�fully�benefit�from�the� support that Philips offers, register your product at www.philips.com/welcome. Introduction With this apparatus, you can: •� Watch video from DVD/VCD/SVCD, iPod/ iPhone/iPad, or USB storage devices •� Enjoy audio from discs, iPod/iPhone/iPad, or USB storage devices •� View pictures from discs or USB storage devices •� Listen to FM radio You can enrich sound output with these sound effects: •� Dynamic Bass Boost (DBB) •� Digital Sound Control (DSC) The apparatus supports these media/disc formats: You can play DVD discs marked with the following region code: DVD region code Countries Europe What's in the box Check and identify the contents of your package: •� Main unit •� 2 speakers •� Remote control (without battery) •� Composite video cable (yellow) •� Power cord •� MP3 link cable •� FM antenna •� 8 rubber cushions •� User manual •� Quick start guide

a •� Turn on the unit, or switch to standby mode. b PRESET +/- •� Select a preset radio station. •� Skip to the previous/next album. a b c d e f h i j k l m n o g c / •� Skip to the previous/next track. •� Search within a track/disc/USB. •� Tune to a radio station. •� Navigate through iPod/iPhone/iPad menu. •� Adjust time.

e SOURCE •� Select a source: DISC, FM, USB, DOCK, AUX IN, or MP3 LINK. f •� Open/close the disc compartment. g Dock for iPod/iPhone/iPad h •� USB socket. i •� Start or pause play. j VOLUME + / - •� Adjust volume. k Display panel •� Show current status. l Disc compartment m MP3-LINK •� Connect external audio device. n •� Headphone socket. o STANDBY Overview of the remote control a •� Turn on the unit or switch to the standby mode. b Source selection keys •� Select a source. c CLOCK/DISPLAY •� Set the clock. •� Display RDS information.

/ ) •� Search in a track or disc. •� Skip to the previous/next track/title/ chapter. •� For menus, navigate left/right. •� Select a preset radio station. •� Rotate a picture. •� Adjust time. e SYSTEM/MENU •� Access or exit the system setup menu. f •� Start or pause play. g PBC •� Turn on/off the playback control. h •� Stop play. i DSC •� Select a preset sound setting. j DBB •� Turn on or off Dynamic Bass Boost (DBB) sound. k Numeric keypad •� Select a title/chapter/track directly. l AUDIO •� For VCD, select stereo, mono-left or mono-right channel. •� For DVD/DivX video, select an audio language. m ANGLE/PROG •� Select a DVD camera angle. •� Program radio stations. n RETURN/TITLE •� Return to the previous menu. o REPEAT A-B •� Repeat�a�specific�section�within�a� track/chapter. p GOTO •� During disc play, specify a position to start play. q SUBTITLE •� Select a subtitle language. r DIM •� Select a brightness level for the display screen. s VOL +/- •� Adjust volume. t •� Mute or restore volume. u MODE •� Select�repeat/shuffle�play�modes. v DISC/MENU •� Access or exit the disc menu. w OK •� Confirm�a�selection. x SLOW/ ZOOM •� For menus: navigate up/down. •� Turn to a radio station. •� Invert a picture. •� ( SLOW) For video: select a slow play mode. •� ( ZOOM) For video: (press) select a slow forward mode; (press and hold) zoom in/out. y TIMER/SLEEP •� Set the alarm timer. •� Set the sleep timer.

1 Place the unit near to the TV. 2 Place�the�left�and�right�speakers�at�equal� distance from the TV and at an angle of approximately 45 degrees from the listening position. Note • To avoid magnetic interference or unwanted noise, never place this apparatus and speakers too close to any radiation devices. • Place this unit on top of a table or mount it on the wall. • Never place this unit in an enclosed cabinet. • Install this unit near the AC outlet where the AC power plug can be easily reached. Connect speakers Note • For optimal sound, use the supplied speakers only. • Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifications�section�of�this�manual. Insert the speaker plugs to SPEAKER OUT (L and R) sockets on the back of the unit. Connect FM antenna Tip • For optimal reception, fully extend and adjust the position of the antenna. • For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA jack. • The unit does not support MW radio reception. Connect the supplied FM antenna to the FM ANTENNA socket on the back of the unit. Connect audio cables Connect an audio cable (red/white - not supplied) to: •� the AUDIO OUT (L and R) sockets on the back of the unit. •� the audio input sockets on the audio device.

You can select the best video connection that your TV supports. •� Option 1: Connect through a composite video (CVBS) cable (for a standard TV). •� Option 2: Connect through component video cables (for a standard TV or Progressive Scan TV). Option 1: Connect through a composite video cable Connect the composite video cable (supplied) to: •� the VIDEO socket on the back of the unit. •� the video input socket on the TV. L LINE IN R TV TV Option 2: Connect through component video cables Note • The�progressive�scan�video�quality�is�only�available� when a progressive scan TV is connected. • If your TV does not support progressive scan, you cannot view the picture. • For how to activate progressive scan on your TV, refer to the TV user manual. Connect a progressive scan TV through component�video�for�higher�quality�video. Connect component video cables (red/blue/ green - not supplied) to: •� the component (Pb/Cb, Pr/Cr, and Y) sockets on the back of the unit. •� the component input sockets on the TV. Connect an external audio device (optional) You can also listen to an external audio device through this unit. •� Option 1: Connect through the AUX-IN sockets •� Option 2: Connect through the MP3- LINK socket COMPONENT VIDEO INPUT Pb/Cb Pr/Cr Y TV

IN sockets Connect audio cables (red/white - not supplied) to: •� the AUX-IN (L and R) sockets on the back of the unit. •� the audio output sockets on the external audio device. Option 2: Connect through the MP3- LINK socket Connect an MP3 link cable to: •� the MP3-LINK socket on the front of the unit. •� the headphone socket on the external audio device. Connect power Caution • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. • Before connecting the AC power cord, ensure you have completed all other connections. 4 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Prepare the remote control Caution • Risk of explosion! Keep batteries away from heat, sunshine�or�fire.�Never�discard�batteries�in�fire. To insert the remote control battery: 1 Open the battery compartment. 2 Insert 2 AAA batteries (not supplied) with correct polarity (+/-) as indicated. 3 Close the battery compartment.

long time, remove the batteries. • Do not use old and new or different types of batteries in combination. • Batteries contain chemical substances, so they should be disposed of properly. Turn on Press . » The unit switches to the last selected source. Switch to standby mode or Eco power standby mode Press again to switch the unit to standby mode. » The clock (if set) appears on the display panel. a b c Switch to ECO standby mode: Press and hold for more than three seconds. » The backlight on the display panel turns off. » The red Eco Power indicator turns on. Switch between standby mode and ECO standby mode: Press and hold for more than three seconds. Note • The unit switches to Eco Power Standby mode after 15 minutes in standby mode. Set clock 1 In the standby mode, press and hold CLOCK/DISPLAY for over 3 seconds to activate the clock setting mode. » The hour digits are displayed and begin to blink. 2 Press / to set the hour, and then press CLOCK/DISPLAY again. » The minute digits are displayed and begin to blink. 3 Press / to set the minute, and then press CLOCK/DISPLAY�to�confirm�the� clock setting. Adjust brightness of display panel In standby mode, press DIM repeatedly to select different brightness levels. Find the correct viewing channel 1 Press DISC to switch to disc mode.

video-in channel in one of the following ways: •� Go to the lowest channel on your TV, and then press the Channel Down button until you see the blue screen. •� Press the source button repeatedly on the remote control of your TV. Tip • The video-in channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO etc. See the TV user manual on how to select the correct input on the TV. Select the correct TV system Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country. 1 Press SYSTEM/MENU. 2 Select [Video Setup] (Video Setup). 3 Select [TV System] (TV System), and then . 4 Select a setting and then press OK. •� [NTSC] (NTSC) - For TV with NTSC color system. •� [PAL] (PAL) - For TV with PAL color system. •� [Multi] (Multi) - For TV that is compatible with both PAL and NTSC. 5 To return to the previous menu, press RETURN/TITLE. 6 To exit the menu, press SYSTEM/MENU. Change system menu language 1 Press SYSTEM/MENU. 2 Select [General Setup] (General Setup). 3 Select [OSD language] (OSD language), and then press . 4 Select a setting and then press OK. 5 To exit the menu, press SYSTEM/MENU. Turn on Progressive Scan Progressive scan displays twice the number of frames per seconds than interlaced scanning (ordinary TV system). With nearly double the number of lines, progressive scan offers higher picture�resolution�and�quality. Before you turn on this feature, make sure that: •� the TV supports progressive scan signals. •� you have connected the unit with the TV through component video. 1 Turn on the TV. 2 Make sure that the TV progressive scan mode is deactivated (see the TV user manual). 3 Switch the TV to the correct viewing channel for this unit. 4 Press DISC, and then press SYSTEM/ MENU. 5 Press / to select [Video Setup] (Video Setup) in the menu, and then press . 6 Select [P-Scan] (P-Scan), and then press OK. » The progressive setup is complete.

the unit. Play a disc Caution • Risk of product damage! Never play discs with accessories such as disc stabilizer rings or disc treatment sheets. • Never put any objects other than discs into the disc compartment. 1 Press DISC to select the DISC source. 2 Press on the top of the unit to open the disc compartment. 3 Insert a disc with the printed side facing upward. 4 Press to close the disc compartment. » Play starts automatically. •� To pause or resume play, press . •� To stop play, press . •� To skip to the previous/next title/ chapter/track, press / . If play does not start automatically: Select a title/chapter/track and then press . Tip • To play a locked DVD, enter the 6-digit parental control password. Use the disc menu When you load a DVD/(S)VCD disc, a menu may be displayed on the TV screen. Press DISC/MENU to access or exit the menu manually. For VCD with PlayBack Control (PBC) feature (version 2.0 only): The PBC feature allows you to play VCD interactively according to the menu screen. During play, press PBC to enable/disable playback control. » When PBC is enabled, the menu screen is displayed. » When PBC is disabled, normal play is resumed. Select an audio language During disc play, press AUDIO to select an audio language for a DVD or DivX (Ultra) video. » The language options appear. If the selected audio channels is unavailable, the default disc audio channel is used. Note • For some DVDs, the language can only be changed from the disc menu. Press DISC/MENU to access the menu. Select a subtitle language During play, press SUBTITLE repeatedly to select a subtitle language for a DVD or DivX (Ultra) video. Note • For some DVDs, the language can only be changed from the disc menu. Press DISC/MENU to access the menu.

discs You can play DivX (Ultra)/MP3/WMA/ JPEG�picture�files�copied�onto�a�CD-R/RW,� recordable DVD or USB storage device. 1 Select a source. •� For a USB storage device, press USB. •� For a disc, press DISC. 2 Insert the USB storage device or disc. » The play starts automatically. To select a specified file for play 1 Press to stop play. 2 Press / to select a folder, and then press OK�to�confirm. •� To return to previous menu, press RETURN/TITLE. 3 Press / �to�select�a�file�from�the�folder. 4 Press to start play. •� To pause or resume play, press . •� To�skip�to�the�previous/next�file,�press� / . •� To change the subtitle language during the play of a DivX (Ultra) video, press SUBTITLE. Note • You can only play DivX (Ultra) videos rented or purchased through the DivX registration code of this unit. • Subtitle�files�with�the�following�filename�extensions�(.srt,� .smi, .sub, .ssa, .ass) are supported but do not appear on the�file�navigation�menu. • The�subtitle�filename�has�to�be�the�same�as�the�file� name of the video. Play a slideshow with background music This�apparatus�can�play�MP3/WMA�files�and� JPEG photos simultaneously. Note • The�MP3/WMA�and�JPEG�files�must�be�stored�on�the� same disc or USB storage device. 1 Play�an�MP3/WMA�file. 2 Navigate to the photo folder/album and press to start the slideshow. » Slideshow begins and continues till the end of the photo folder or album. » Audio continues till the end of the last file. •� To return to the previous menu, press RETURN/TITLE. •� To stop the slideshow, press . Play control Select repeat/shuffle play options During play, press MODE repeatedly to select a play option. •� To resume normal play, press MODE repeatedly until no option is displayed. Search forward/backward During video/audio play, press / repeatedly to select a search speed. •� To resume play at normal speed, press . Search by time or title/chapter/track number 1 During video/audio play, press GOTO. 2 Enter the desired time or number. •� For�the�time�field,�enter�the�play� position�in�sequence�of�hour,�minute,� and second. •� For�the�title/chapter/track�field,�enter� the title/chapter/track number. » Play starts automatically at the selected point.

point Note • This feature is only available for DVD/VCD play. In stop mode and when the disc has not been removed, press . To cancel resume mode and stop play completely: In stop mode, press . Play options Display RDS information 1 In tuner mode, press CLOCK/DISPLAY to display the clock. Press again to display RDS information. 2 In other mode, press CLOCK/DISPLAY to display the clock. Zoom in/out image During video play, press and hold ZOOM to zoom in/out the image. •� When the image is zoomed in, you can press ZOOM to pan through the image. Slow-motion play During video play, press SLOW to select a slow backward/forward speed. » The sound is muted. •� To resume play at normal speed, press . Change camera angle Some DVDs contain alternate scenes, such as scenes recorded from different camera angles. For such DVDs, you can select from the available alternate scenes. During play, press ANGLE/PROG repeatedly to switch between camera angles. Change the audio channel Note • This feature is only available for VCDs and DivX (Ultra) videos. During play, press AUDIO repeatedly to select an audio channel available on the disc: •� Mono Left (mono left) •� Mono Right (mono right) •� Mix Mono (mix mono) •� Stereo (stereo) Picture view options Rotate picture During play, press / to rotate the picture anti-clockwise/clockwise.

iPhone/iPad When the iPod/iPhone/iPad is docked on this Micro System, you can listen to music from the speakers. Note • No audio output from the headphone jack in this situation. Compatible iPod/iPhone/iPad The unit supports the following iPod/iPhone/ iPad models. Made for •� iPod 5G •� iPod 4G •� iPod mini •� iPod touch (1st, 2nd, 3rd, and 4th generation) •� iPod classic •� iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) •� iPhone 4 •� iPhone 3GS •� iPhone 3G •� iPhone •� iPad Load the iPod/iPhone/iPad 1 Lift up the iPod/iPhone/iPad dock on the top panel until you hear a click. 2 Place the iPod/iPhone/iPad in the dock. Charge the iPod/iPhone/iPad When the unit is connected to the power, the docked iPod/iPhone/iPad begins to charge. Note • iPod with color display, iPod classic, and iPod with video are not compatible with dock charging.

iPad 1 Make sure that your iPod/iPhone/iPad has been loaded securely. 2 Press DOCK to select iPod/iPhone/iPad source. 3 Play audio on your iPod/iPhone/iPad. •� To pause/resume play, press . •� To skip to a track, press / . •� To select a track, press / to select an item, and then press OK�to�confirm. Remove the iPod/iPhone/iPad 1 Pull the iPod/iPhone/iPad out of the dock. 2 Press down to hide the dock. 7 Listen to radio Tip • Position the antenna as far as possible from TV, VCR or other radiation source. • For optimal reception, fully extend and adjust the position of the antenna. Tune to a radio station 1 Press FM. 2 Press and hold / for more than 2 seconds. » [SEARCH] (search) is displayed. » The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. •� To tune to a weak station, press / �repeatedly�until�you�find�optimal� reception. Program radio stations automatically Note • You can program a maximum of 20 preset radio stations. In tuner mode, press and hold ANGLE/ PROG for 3 seconds to activate automatic programming. » [AUTO SCAN] (auto scan) is displayed briefly. » All available stations are programmed in the order of waveband reception strength. » The�first�programed�radio�station�is� broadcast automatically.

manually Note • You can program a maximum of 20 preset radio stations. 1 Tune to a radio station. 2 Press ANGLE/PROG to activate programming. 3 Press / to allocate a number from 1 to 20 to this radio station, and then press ANGLE/PROG�to�confirm. » The�preset�number�and�the�frequency� of the preset station are displayed. 4 Repeat the previous steps to program more stations. Note • To overwrite a programmed station, store another station in its place. Tune to a preset radio station In the tuner mode, press / to select a preset number. •� You can also press the numeric buttons to select a preset number directly. 8 Adjust sound Adjust volume level During play, press VOL +/- to increase/decrease the volume level. Select a sound effect Note • You cannot use different sound effects at the same time. Select a preset sound effect During play, press DSC repeatedly to select: •� [CLASSIC] (classic) •� [JAZZ] (jazz) •� [POP] (pop) •� [ROCK] (rock) Enhance bass The best Dynamic Bass Boost (DBB) setting is generated automatically for each DSC option. You can manually select the DBB setting that best suits your listening environment. During play, press DBB repeatedly to turn on/ off the DBB feature. •� [DBB]: The DBB feature is enabled. Mute sound During play, press to mute or restore sound.

1 Press SYSTEM/MENU. 2 Select a setup page. 3 Select an option and then press . 4 Select a setting and then press OK. •� To return to the previous menu, press RETURN/TITLE. •� To exit the menu, press SYSTEM/ MENU. General setup On the [General Setup] (general setup) page, you can set the following options: [OSD language] (OSD language) Select the preferred language for on-screen display. [DivX® VOD Code] (DivX® VOD Code) Display the DivX® registration code. [DivX Deactivation] (DivX Deactivation) Deactivate the authorization to current user. Note • Enter this DivX registration code when you rent or purchase a video from http://vod.divx.com/. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered. Audio setup On the [Audio Setup] (Audio Setup) page, you can set the following options: [Digital Output] (Digital Output) Select audio formats supported by the connected device. •� [Off] (Off) – Turn off the digital output. •� [PCM] (PCM) – If the connected device cannot decode multichannel audio, select this option. •� [All] (All) – If the connected device supports multi-channel audio formats, select this option. [Night Mode] (Night Mode) Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others. •� [On]�(On)�–�enjoy�quiet�viewing�at�night� (DVDs only). •� [Off] (Off) – enjoy surround sound with its full dynamic range. Video setup On the [Video Setup] (Video Setup) page, you can set the following options: [TV System] (TV System) Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country. •� [NTSC] (NTSC) - For TV with NTSC color system. •� [PAL] (PAL) - For TV with PAL color system. •� [Multi] (Multi) - For TV that is compatible with both PAL and NTSC. [TV Display] (TV Display) The TV format determines the aspect ratio of display according to the type of TV you have connected. •� [4:3 Pan Scan] (4:3 Pan Scan) – For 4:3 screen TV: full-height display with the trimmed sides. 4:3 Letter Box (LB) 4:3 Pan Scan (PS) 16:9 (Wide Screen)

screen TV: wide-screen display with black bars on the top and bottom of the screen. •� [Wide Screen] (Wide Screen) – For wide- screen TV: display ratio 16:9. [Picture Settings] (Picture Settings) Select�a�predefined�set�of�picture�color�settings. •� [Standard] (Standard) – Original color setting. •� [Vivid] (Vivid) – Vibrant color setting. •� [Cool] (Cool) - Soft color setting. •� [Personal] (Personal) – Customizes the color setting. Set the level of brightness, contrast, sharpness/tint and color saturation, and then press OK. [Component Video] (Component Video) Set the video output according to the video connection. If the composite connection is used, this�setting�is�not�required. •� [S-VIDEO] (S-Video) – If the S-Video connection is used, select this option. •� [Interlaced] (Interlaced) – For ordinary TV: turn on the interlace mode. •� [P-Scan] (P-Scan) – For progressive scan TV: turn on the progressive scan mode. Preferences On the [Preferences] (Preferences) page, you can set the following options: [Audio] (Audio) Select the preferred audio language for disc play. [Subtitle] (Subtitle) Select the preferred subtitle language for disc play. [Disc Menu] (Disc Menu) Select the preferred disc menu language. Note • If the language you have set is not available on the disc, the disc uses its own default language. • For some discs, the subtitle/audio language can only be changed from the disc menu. [DivX Subtitle] (DivX Subtitle) Select a character set that supports the DivX subtitle. Note • Ensure�that�the�subtitle�file�has�the�exact�same�file� name�as�the�movie�file.�If�for�example�the�file�name�of� the movie is ‘Movie.avi’, then you will need to name the text�file�‘Movie.sub’�or�‘Movie.srt’. [Parental Control] (Parental Control) Restrict access to discs that are unsuitable for children. These types of discs must be recorded with ratings. 1) Press OK. 2) Select a rating level, and then press OK. 3) Press the numeric keys to enter the password. Note • Rated discs above the level you set in [Parental Control]�(Parental�Control)�require�a�password�to�be� played. • The ratings are country-dependent. To allow all discs to play, select [8. Adult] (8. Adult). • Some discs have ratings printed on them but are not recorded with ratings. This function has no effect on such discs. [Password] (Password) This setting allows you to change the password for parental control. The default password is 123456. 1) Press the numeric keys to enter '123456' or your last set password at [Old Password] (Old�Password)�field. 2) Enter the new password at [New Password]�(New�Password)�field. 3) Enter the new password again at [Confirm new password]�(Confirm�New�Password)� field. 4) Press OK to exit the menu.

set a new password. [Version Info] (Version Information) Display the software version of this device. [Default] (Default) Reset all the settings to factory default, except for the password and parental settings. 10 Other features Activate demonstration mode You can see an overview of all features. In the standby mode with clock display (if set), press on the main unit to activate the demonstration mode. » A demonstration of major available features starts. To deactivate the demonstration mode: Press on the main unit again. Set alarm timer This unit can be used as an alarm clock. You can select DISC, FM, iPod/iPhone/iPad, or USB as alarm source. Note • Make sure that you have set the clock correctly. 1 In standby mode, press and hold TIMER/ SLEEP until [SET TIMER] (set timer) scrolls on the display. 2 Press a source key to select a source (DISC, FM, iPod/iPhone/iPad, or USB), and then press TIMER/SLEEP�to�confirm. » The hour digits are displayed and begin to blink. 3 Press / repeatedly to set hour, and then press TIMER/SLEEP again. » The minute digits are displayed and begin to blink. 4 Repeat step 4 to set minute. 5 Press VOL +/- to adjust volume, and then press TIMER/SLEEP�to�confirm. » A clock icon is displayed.

In standby mode, press TIMER/SLEEP repeatedly. » If timer is activated, is displayed. » If timer is deactivated, disappears on the display. Tip • Alarm timer is not available when the source is set as "MP3 LINK" or "AUX-IN". • If DISC/USB/iPod/iPhone/iPad source is selected but no disc is placed or no USB/iPod/iPhone/iPad connected, the system switches to FM automatically. Set the sleep timer This device can switch to standby mode automatically after a set period. When the device is turned on, press TIMER/ SLEEP repeatedly to select a preset period (in minutes). » When sleep timer is activated, is displayed. To deactivate sleep timer: Press TIMER/SLEEP repeatedly until [TIMER OFF] (timer off) is displayed. » When sleep timer is deactivated, is displayed. Listen to an audio device You can listen to an audio device through this apparatus. 1 Ensure the external audio device is connected to this apparatus (see "Connect" > "Connect an external audio device"). 2 Press MP3 LINK/AUX-IN repeatedly to select the audio input through the MP3-LINK socket or AUX-IN (L and R) sockets. 3 Start to play the device (see the device user manual). Listen through headphone Plug a headphone into the socket. Note • No audio output from the headphone jack when you listen to the docked iPod/iPhone/iPad. Please listen through the speakers instead.

notice. Specifications Amplifier Rated Output Power 2 X 60 W RMS Frequency�Response 80 Hz - 16000 Hz, ±3 dB Signal to Noise Ratio > 65 dB Aux Input 2 V RMS 20 kohm Disc Laser Type Semiconductor Disc Diameter 12 cm/8 cm Video Decoding MPEG-1 / MPEG-2 / DivX Video DAC 12 Bits Signal System PAL / NTSC Video Format 4:3 / 16:9 Video S/N > 48 dB Audio DAC 24 Bits / 96 kHz Total Harmonic Distortion < 0.8% (1 kHz) Frequency� Response 4 Hz - 20 kHz (44.1 kHz) 4 Hz - 22 kHz (48 kHz) 4 Hz - 24 kHz (96 kHz) S/N Ratio > 65 dBA Tuner (FM) Tuning Range 87.5-108 MHz Tuning grid 50 KHz Sensitivity - Mono, 26dB S/N Ratio <22 dBf Sensitivity - Stereo, 46dB S/N Ratio <43 dBf Search Selectivity >28 dBf Total Harmonic Distortion <2% Signal to Noise Ratio >55 dB Speakers Speaker Impedance 4 ohm Speaker Driver 3.5" woofer X 2 + 1" tweeter Sensitivity > 80 dB/m/W ± 4 dB/m/W General information AC power 220-240 V; 50/60 Hz Operation Power Consumption 60 W Eco Standby Power Consumption < 0.5 W Composite Video Output 1.0 Vp-p, 75 ohm Headphone output 2 X 8 mW, 32 ohm USB Direct Version 2.0 Dimensions - Main Unit (W x H x D) - Speaker Box (W x H x D) 239 x 141.5 x 230 mm 142 x 307 x 230 mm Weight - Main Unit - Speaker Box 2.1 kg 2 x 2.55 kg

•� Digital Video Discs (DVDs) •� Video CDs (VCDs) •� Super Video CDs (SVCDs) •� Digital Video Discs + Rewritable (DVD+RW) •� Compact Discs (CDs) •� Picture�(Kodak,�JPEG)�files�on�CDR(W) •� DivX(R) disc on CD-R(W): •� DivX 3.11, 4.x and 5.x •� WMA Supported MP3-CD formats: •� ISO 9660 •� Max. title/album name: 12 characters •� Max. title number plus album: 300. •� Min. nested directory: 6 levels. •� Max. album number: 32. •� Max. MP3 track number: 2000. •� Supported�sampling�frequencies�for�MP3� disc: 32 kHz, 44.1 kHz, 48 kHz. •� Supported Bit-rates of MP3 disc are: 32, 64, 96, 128, 192, 256 (kbps). •� The following formats are not supported: •� Files like *.VMA, *.AAC, *.DLF, *.M3U, •� *.PLS, *.WAV •� Non-English Album/Title name •� Discs recorded in Joliet format •� MP3 Pro and MP3 with ID3 tag USB playability information Compatible USB devices: •� USB�flash�memory�(USB�2.0�or�USB1.1) •� USB�flash�players�(USB�2.0�or�USB1.1) •� memory�cards�(requires�an�additional�card� reader to work with this apparatus) Supported formats: •� USB�or�memory�file�format�FAT12,�FAT16,� FAT32 (sector size: 512 bytes) •� MP3 bit rate (data rate): 32-320 Kbps and variable bit rate •� WMA v9 or earlier •� Directory nesting up to a maximum of 6 levels •� Number of albums/ folders: maximum 300 •� Number of tracks/titles: maximum 2000 •� ID3 tag v2.0 or later •� File name in Unicode UTF8 (maximum length: 128 bytes) Unsupported formats: •� Empty albums: an empty album is an album that�does�not�contain�MP3/WMA�files,�and� is not be shown in the display. •� Unsupported�file�formats�are�skipped.�For� example, Word documents (.doc) or MP3 files�with�extension�.dlf�are�ignored�and� not played. •� AAC,�WAV,�PCM�audio�files •� DRM�protected�WMA�files�(.wav,�.m4a,� .m4p, .mp4, .aac) •� WMA�files�in�Lossless�format

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting�service.�If�the�problem�remains� unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. No power • Make sure that the AC cord of the apparatus is connected properly. • Make sure that there is power at the AC outlet. • As a power-saving feature, the system switches off automatically 15 minutes after track play reaches the end and no control is operated. No disc detected • Insert a disc. • Check if the disc is inserted upside down. • Wait until the moisture condensation at the lens has cleared. • Replace or clean the disc. • Use�a�finalized�CD�or�correct�format�disc. No picture • Check the video connection. • Turn on the TV to the correct Video-In channel. • Progressive scan is activated but the TV does not support progressive scan. Black and white or distorted picture • The disc does not match the TV color system standard (PAL/NTSC). • Sometimes a slight picture distortion may appear. This is not a malfunction. • Clean the disc. • A distorted picture may appear during progressive scan setup. The aspect ratio of the TV screen cannot be changed even though you have set the TV display format. • The�aspect�ratio�is�fixed�on�the�loaded� DVD disc. • The aspect ratio may not be changed for some TV systems. No sound or poor sound • Adjust the volume. • Disconnect the headphones. • Check that the speakers are connected correctly. • Check if the stripped speaker wires are clamped. Remote control does not work • Before�you�press�any�function�button,�first� select the correct source with the remote control instead of the main unit. • Reduce the distance between the remote control and the unit. • Insert the battery with its polarities (+/– signs) aligned as indicated. • Replace the battery. • Aim the remote control directly at the sensor on the front of the unit. Disc does not play • Insert a readable disc with the label side facing you. • Check the disc type, color system and regional code. Check for any scratches or smudges on the disc. • Press SYSTEM MENU to exit the system setup menu. • Disable the password for parental control or change the rating level.

Remove the disc and leave the system turned on for about an hour. Disconnect and reconnect the AC power plug, and then turn on the system again. • As a power-saving feature, the system turns off automatically 15 minutes after disc play reaches the end and no control is operated. DivX video files cannot be played. • Ensure�that�the�DivX�video�file�is� complete. • Ensure�that�the�file�extension�is�correct. • Due to Digital Rights issue, the DRM- protected�video�files�cannot�be�played� through an analog video connection (e.g. composite, component and scart). Transfer the video content onto the Disc Media and�play�these�files. Poor radio reception • Increase the distance between the apparatus and your TV or VCR. • Fully extend the FM antenna. • Connect an outdoor FM antenna instead. Audio or subtitle languages cannot be set • The disc is not recorded with sound or subtitles in multiple languages. • The audio or subtitle language setting is prohibited on the disc. Cannot display some files in USB device • The�number�of�folders�or�files�in�the�USB� device has exceeded a certain limit. This phenomenon is not a malfunction. • The�formats�of�these�files�are�not� supported. USB device not supported •� The USB device is incompatible with the unit. Try another one. Timer does not work • Set the clock correctly. • Switch on the timer. Clock/timer setting erased • Power has been interrupted or the power cord has been disconnected. • Reset the clock/timer.

interference�requirements�of�the�European� Community. Any�changes�or�modifications�made�to�this� device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority�to�operate�the�equipment. Your product is designed and manufactured with�high�quality�materials�and�components,� which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative�consequences�for�the�environment�and� human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative�consequences�for�the�environmental� and human health. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

Logo Licensing Corporation. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of�Rovi�Corporation.�This�is�an�official�DivX� Certified®�device�that�plays�DivX�video.�Visit� divx.com for more information and software tools�to�convert�your�files�into�DivX�videos.� ABOUT DIVX VIDEO-ON-DEMAND: This DivX�Certified®�device�must�be�registered� in order to play purchased DivX Video-on- Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX�Ultra®�Certified�to�play�DivX®�video� with advanced features and premium content. DivX®,�DivX�Certified®�and�associated�logos� are trademarks of Rovi Corporation or its subsidiaries and are used under license. “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has�been�designed�to�connect�specifically�to� iPod, iPhone, or iPad, respectively, and has been�certified�by�the�developer�to�meet� Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc. This apparatus includes this label: Note • The type plate is located on the back of the device.

© 2012 Koninklijke Philips Electronics N.V. All rights reserved. DCD3020_58_UM_V1.0