TeleEye MX721-HD Quick Start Manual
Text of the manual
Quick Start Guide
TeleEye MX721-HD/MX821-HD Network Camera
This Quick Start Guide will guide you how to install and configure the TeleEye MX721-HD / MX821-HD Network Camera
for remote video monitoring.
Camera Installation
Step 1.
After mounting the camera on the wall or ceiling, connect the Ethernet cable to the LAN adapter and
the 12VDC power supply to the
IP Setup Utility
Step 1.
After installing sureSIGHT and turning on the Network Camera, select the “Run TeleEye IP Setup
Utility” from the windows start menu.
Step 2.
Search the target camera by its serial number, highlight the corresponding row from the list on the left
side of the window to select it. If the camera cannot be found, click the [Refresh] b
Live Monitoring with Web-Browser
Step 1.
Open a web browser on a PC and type in the IP address of the Network Camera.
Step 2.
Select the connection type and input the password.
[Note] The default password is “000000”.
Step 3.
Click the [Connect] button to connect the selected video stream. Video will then be displayed on the
browser as follow.
3
Live Monitoring with sureSIGHT
Step 1.
After installing sureSIGHT and turning on the Network Camera,
select the “Run sureSIGHT Lite” from the windows start menu. Input the
password to log-in to the sureSIGHT.
[Note] The default password for administrator is “000000”.
Step 2.
Click the [Connect] button on the left panel.
Step 3.
Click the [Search all
