Mountup MU4002 Instruction Manual

Instruction Manual If you have any questions , please contact us. MU4002 V3.0 75x75 100x100 (8kg/17.6lbs)x2 27"

this product, please contact us. Before starting assembly, verify all parts are included and undamaged. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specifed in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use. This product contains small items that could be a choking hazard if swallowed. NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED. NOTE: Not all hardware included will be used. DO NOT EXCEED WEIGHT CAPACITY. WARNING! PACKAGE CONTENTS (17.6lbs)x2 (8kg)x2 B (x2) Swivel Arm C (x1) Clamp D (x1) Pole G (x3) Bolt F (x1) Base Plate K(x1) 4mm Allen Key H(x1) Support Plate M(x1) Laptop Tray N(x4) Pad O(x4) Screw P(x4) Nut Q(x1) Strap L(x1) 6mm Allen Key J(x2) Bolt I(x4) Wire clip E(x1) Wire Clip A (x2) VESA Plate M-E(x4) D6 Washer M-A (x4) M4x12 M-B (x4) M4x16 M-C (x4) M6x12 M-D (x4) M6x16 01 M-F (x4) Spacer

Install the Clamp (C) to the Pole (D) using 3pcs Bolt(G). Tighten using 4mm Allen key (K). Secure stand to the desktop by tightening the plastic knob or by using 6mm Allen key (L). ASSEMBLY STEPS STEP 1: Clamp Installation OR Grommet Base Installation 02 G K 10-80mm L OR D C

03 OPTION B: Grommet Base Installation If existing grommet hole comes with a plastic protector, remove it to ensure a fat surface before installing the desk mount. Loosen the screw, separate the clamp (C) into two parts. Install the Base Plate (F) to the Pole(D）using 1pc of Bolt (G). Install the pole (D) on the desktop using the support plate (H) and the bolt separated from clamp(C). Secure stand to desktop by tightening the plastic knob or by using 6mm Allen key (L). 10-80mm D F H G L OR DESK DESK ø 0.39"~3.1" C

04 Install wire clip (E) and two swivel arms (B) to the pole (D). Fasten the bolt with supplied 6mm Allen key (L). Attached the wire clips (I) to the swivel arm (B). B B I E D L

05 CAUTION:To select the correct screws (M-A or M-C) for your monitor, you can try to screw it on your monitor by hand. The one can screw inside is the correct screw for your monitor. STEP 3 : Attach the VESA Plate to the Monitor or Laptop Tray A M-A M-C M-E L OPTION A: Flat Back Monitor For flat back monitor, secure VESA plate (A) to monitor using screws (M-A or M-C) and washers (M-E). Tighten the screws using 6mm Allen key (L). A M-B M-D M-E M-F L OPTION B: Curved Back Monitor For monitor with curved or recessed back, align spacers (M-F) with mounting holes in monitor, and secure VESA plate (A) to monitor using screws (M-B or M-D) and washers (M-E). Tighten the screws using 6mm Allen key (L).

STEP 4 : Hang Monitor and Laptop Tray 06 J N N O M P A Slide the monitor and laptop tray onto the head of swivel arm (B). Install the security bolt (J). Make sure the security bolt is installed before you rotate the monitor. Install the VESA plate (A) to the laptop tray (M) using 4pcs screws (O) and 4pcs nuts (P) , tighten by 6mm Allen key (L) . Apply pads (N) to the laptop tray to avoid laptop scratches. B L NOTE: Attach the pads on the tray based on the size of the laptop.

07 Q Untie the strap before you cover the laptop. Blank side Loop&Hook side

Tighten the bolt with the supplied 6mm Allen key (L) to fx the tilt angle. 08 L L Note: 1. Loosen the tilting bolt. 2. Adjust monitor to your desired tilting angle. 3. Retighten the tilting bolt to Tilts down Guideline to adjust monitor tilting angle.

09 K L E Manage cables and store Allen keys (K,L) in wire clip (E) for future use.

Adjust monitor position and rotation. 10 Product Dimensions +90° 360° -90° 75mm 114mm 100mm 75mm 100mm 114mm 403mm 134mm 184mm ±90° 36mm ±90° 360° ±90° +90° -90° 100mm/3.94" 00mm~80mm 0“-3.15” DESK DESK Pay attention while clamp install ! 300mm 290mm 260mm 20mm 360° +90° -90° ±90° ±90° ±90° ±90°

• Never allow children to climb, stand, hang, or play on any part of monitor or stand. • This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. • Check that the bracket is secure and safe to use at regular intervals (at least every three months). If you have any questions, please contact us.