Eizo FLEXSCAN MX240W Operation & User’s Manual

familiarize yourself with safe and effective usage procedures. Please retain this manual for future reference. About TCO'03.................................................................37 FCC Declaration of Conformity.......................................38 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor / Hinweis zur Ergonomie...................................................39 SAFETY SYMBOLS.........................................................2 PRECAUTIONS...........................................................3 1. Introduction...................................................................7 1-1. Features................................................................... 7 1-2. Buttons and Indicators............................................. 8 1-3. Utility Disk................................................................ 9 2. Installation...................................................................10 2-1. Connecting Two PCs to the Monitor....................... 10 2-2. Making Use of USB (Universal Serial Bus)................11 3. Screen Adjustment and Settings................................12 3-1. Basic Operation and Functions.............................. 12 3-2. Screen Adjustment................................................. 14 3-3. Color Adjustment.................................................... 17 3-4. Power-save Setup.................................................. 20 3-5. Off Timer................................................................ 21 3-6. Locking the settings............................................... 21 3-7. Power Indicator Setting.......................................... 22 3-8. Automatic brightness adjustment........................... 22 3-9. Displaying Lower Resolutions................................ 23 3-10. Setting the orientation of the Adjustment menu ���������24 3-11. EIZO Logo Appearing Function............................ 24 4.Troubleshooting...........................................................25 5. Reference...................................................................28 5-1. Attaching an arm.................................................... 28 5-2. Cleaning................................................................. 29 5-3. Specifications......................................................... 30 5-4. Glossary................................................................. 33 6. APPENDIX/ANHANG/ANNEXE.................................35

WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or propertyor product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2007 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION. EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION's receipt of said information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are subject to change without notice. ENERGY STAR is a U.S. registered mark. Macintosh is registered trademark of Apple Inc. VGA is a registered trademark of International Business Machines Corporation. DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards Association. Windows is a registered trademark of Microsoft Corporation. PowerManager and RadiCS are trademarks of EIZO NANAO CORPORATION. ScreenManager, FlexScan and EIZO are registered trademarks of EIZO NANAO CORPORATION As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Product specifications may vary depending on the region. Confirm the specifications in the manual written in the language of the region of purchase.

If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. This product is designed for use in Japan only and cannot be used in any other countries. • To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage. Do not open the cabinet or modify the unit. Opening the cabinet or modifying the unit may result in fire, electric shock, or burn. Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock, or equipment damage. Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit checked by a qualified service engineer before using it again.

A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. Set the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage. • Do not place outdoors. • Do not place in the transportation system (ship, aircraft, trains, automobiles, etc.) • Do not place in a dusty or humid environment. • Do not place in a location where the steam comes directly on the screen. • Do not place near heat generating devices or a humidifier. To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord.Not doing so may result in fire or electric shock. Power supply: 100-120/200-240 Vac, 50/60 Hz To disconnect the power cord, grasp the plug firmly and pull. Tugging on the cord may damage and result in fire or electric shock. OK The equipment must be connected to a grounded main outlet. Not doing so may cause in fire or electric shock. Use the correct voltage. • The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User's Manual may cause fire, electric shock, or equipment damage. Power supply: 100-120/200-240 Vac, 50/60 Hz • Do not overload your power circuit, as this may result in fire or electric shock. Handle the power cord with care. • Do not place the cord underneath the unit or other heavy objects. • Do not pull on or tie the cord. If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or electric shock. Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock.

stand and install the unit securely. Not doing so may cause the unit to come unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely. Do not touch a damaged LCD panel directly with bare hands. The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms result, please consult your doctor. Lamps contain mercury, dispose according to local, state or federal laws. CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. • Do not place any objects on the ventilation slots. • Do not install the unit in a closed space. • Do not use the unit laid down or upside down. Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment damage. Do not touch the plug with wet hands. Doing so may result in electrical shock. Use an easily accessible power outlet. This will ensure that you can disconnect the power quickly in case of a problem. Periodically clean the area around the plug. Dust, water, or oil on the plug may result in fire. Unplug the unit before cleaning it. Cleaning the unit while it is plugged into a power outlet may result in electric shock. If you plan to leave the unit unused for an extended period, disconnect the power cord from the wall socket after turning off the power switch for the safety and the power conservation.

monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing pixels or lit pixels does not indicate damage to the LCD monitor. Percentage of effective pixels : 99.9994% or higher. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the screen, it may deteriorate or damage your LCD panel. Leave the screen white or black to decrease the prints. When the screen image is changed after displaying the same image for extended periods of time, an afterimage may appear. Use the screen saver or timer to avoid displaying the same image for extended periods of time. When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation disappears, otherwise it may cause some damages to it. Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the panel. Do not attempt to brush with tissues as this may scratch the LCD panel. To use the monitor comfortably An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the environmental conditions. Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

1-1. Features • 24" wide format LCD • Applicable to HDCP • Dual inputs compliant (DVI-I x 2) • DVI Digital input (TMDS ) compliant • [Horizontal scanning frequency] Analog: 24 - 94 kHz Digital: 31 - 76 kHz [Vertical scanning frequency] Analog: 49 - 86 Hz (1600 x 1200: 49 - 76 Hz / 1920 x 1200: 49 - 61 Hz) Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz) [Resolution] 1920 dots x 1200 lines • Frame Synchronous mode supported (59 - 61 Hz) • DICOM mode (CAL Switch function) • CAL Switch function for selecting an optimal calibration mode • The Portrait/Landscape display capability • The quality control software "RadiCS LE" (for Windows) used to calibrate the monitor is included(refer to the EIZO LCD Utility Disk). • The utility software "ScreenManager Pro for Medical" (for Windows) to control the monitor from a PC with mouse/keyboard is included (refer to the EIZO LCD Utility Disk). • Smoothing function incorporated for the adjustment of an enlarged image • Height adjustable stand • BrightRegulator function incorporate

1 2 4 5 6 7 8 3 9 1. Sensor (BrightRegulator) 2. Adjustment Lock button 3. Input Signal Selection button 4. Mode button 5. Auto Adjustment button 6. Enter button 7. Control buttons (Left, Down, Up, Right) 8. Power button 9. Power indicator Indicator status Operation status Blue The screen is displayed Orange Power saving Off Power off *ScreenManager® is an EIZO's nickname of the Adjustment menu. Buttons Adjustment menu (ScreenManager®*)

An "EIZO LCD Utility Disk" (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. Disk contents and software overview The disk includes a monitor information file, application software programs for adjustment, and User’s Manual. Refer to "Readme.txt” or the "Readme" file on the disk for software startup procedures or file access procedures. Item Overview For Windows For Macintosh A “Readme.txt” or “Readme” file √ √ Color Profiles (ICC Profiles) Color profiles - √ Screen Adjustment Program Available for easy adjustments of the monitor screen following adjustment patterns and procedures on the screen. √ √ RadiCS LE RadiCS LE is quality control software used to calibrate the monitor and manage the calibration history. (A PC must be connected to the monitor with the supplied USB cable.) Refer to the description later. √ - ScreenManager Pro for Medical A utility software program to control monitor adjustments from a PC using its mouse and keyboard. (A PC must be connected to the monitor with the supplied USB cable.) Refer to the description later. √ - User’s Manual (PDF file) √ √ To RadiCS LE or ScreenManager Pro for Medical Refer to the corresponding User's Manual on the CD-ROM disk in order to install and use the software. When using this software, you will need to connect a PC to the monitor with the supplied USB cable. For more information refer to the "2-2. Making Use of USB (Universal Serial Bus)" (page 11).

Two PCs can be connected to the monitor through the DVI-I connector on the back of the monitor. Connection examples PC 1 PC 2 (Ex.1) Digital DVI Signal Cable (FD-C39 enclosed) Signal Cable (FD-C16 enclosed) D-Sub mini 15 pin Analog (Ex.2) Analog D-Sub mini 15 pin Signal Cable (FD-C16 enclosed) Signal Cable (FD-C16 optional) D-Sub mini 15 pin Analog Selecting input signal Switch the input signal with . Input signal switches each time is pressed. When the signal is switched, the active signal type (Signal 1 or 2/ Analog or Digital) appears at the top right corner of the screen for two seconds. To set auto-switching of input signals [Input Signal] The monitor recognizes the connector through which PC signals are input. When either PC is turned off or enters the power-saving mode, the monitor automatically displays signals of another PC. Priority setting Function Auto When either PC is turned off or enters the power-saving mode, the monitor automatically displays signals of another PC. Manual The monitor does not detect the PC’s signals automatically. Select an active input signal with . [Input signal setting] 1. Choose from the Adjustment menu, and press . 2. Choose from the menu, and press . The menu appears. 3. Select "Auto" or "Manual" with or , and press . The Input Priority setting is completed. SIGNAL1 SIGNAL2 Input Signal Selection button

This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected. Required system environment • PC equipped with USB ports or another USB hub connected to the USB compliant PC • Windows 2000/XP/Vista // Mac OS 9.2.2 or later • USB Cable (MD-C93, enclosed) NOTE • The USB hub function may not work properly depending on the PC or peripherals. Please consult the manufacturer of each device about the USB support. • Using the USB Rev. 2.0 compatible PC or peripherals is recommended. • If the monitor is in the power saving mode, or if the monitor is connected to the power outlet with the monitor turned off, all the devices connected to the USB ports (upstream and downstream) work. Therefore, power consumption of the monitor varies with connected devices even in the power saving mode. • The followings are procedures for the Windows2000/XP/Vista and Mac OS. Connecting to the USB HUB 1 Connect the monitor to the PC with the signal cable first, then turn on the PC. 2 Connect the upstream port of the monitor to the downstream port of the USBcompliant PC or another hub by using the USB cable. After connecting the USB cable, the USB function can be set up automatically. 3 After setting up, the monitor's USB hub is available for connecting USB compliantperipherals to the downstream ports of the monitor. Downstream Upstream

3. Screen Adjustment and Settings 3-1. Basic Operation and Functions Adjustment menu allows you to adjust screen performance though the main menu and select a CAL Switch mode easily. NOTE •The Adjustment menu and the CAL Switch mode name cannot be displayed at the same time. 1 Entering the Adjustment menu Press once to display the main menu of the Adjustment menu. 2 Making Adjustments and Settings 1. Select the desired sub menu icon using and press . The sub menu appears. 2. Use to select the desired setting icon and press . The setting menu appears. 3. Use to make all required adjustments and press save the settings. 3 Exiting the Adjustment menu. 1. To return to the main menu, select the icon or press twice, followed by . 2. To exit the Adjustment menu, select icon or press twice, followed by . Tips • Double clicking at any time also exits the Adjustment menu. Adjustment menu (ScreenManagaer®) Mode button Control buttons (Left, Down, Up, Right) Power button Enter button CAL Switch Menu

13 Functions The following table shows all the Adjustmet menu's adjustment and setting menus. "*" indicates adjustments of analog input only and "**" indicates digital input only. Main menu Sub menu Reference Screen Clock * 3-2. Screen Adjustment Phase * Position * Resolution * Range Adjustment * Smoothing Signal Filter * Color(Custom)*1 Brightness 3-3. Color Adjustment Temperature Gamma Saturation Hue Gain 6 Colors Reset PowerManager DVI DMPM ** 3-4. Power-save Setup VESA DPMS * OFF Others Screen Size 3-9. Displaying Lower Resolutions Border Intensity Input Signal Set the input signal selection of automatic or manual. Off Timer Set the monitor's Off Timer to on or off. Menu Settings Menu Size Change the size of the menu. Menu Position Adjust the menu position. Menu Off Timer Set the menu displaying time. Translucent Set the transparency of the background. Orientation Set the orientation of the Adjustment menu. BrightRegulator Set automatic brightness adjustment. Power Indicator Make non-light for blue lighting when the screen is displayed. ( Power Indicator Setting. ) Reset Return to the factory Default settings. Information Information Review the Adjustment menu's settings, model name, serial number and usage time.*2 Language English, German, French, Spanish, Italian, Swedish, Chinese(Simplified), Chinese(Traditional) and Japanese Select the Adjustment menu's language. *1 The adjustable functions on the menu depend on the selected CAL Switch mode. The above table shows the sub menus when the "Custom" mode is selected (See " 3-3. Color Adjustment "). *2 Due to the inspection on the factory, the usage time may not "0 hour" at shipping.

3-2. Screen Adjustment NOTE • Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments. The monitor displays the digital input image correctly based on its pre-setting data. Analog Input Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode. It is also recommended to use the Adjustment menu function when first installing the display or whenever changing the system. For convenience, an easy set-up Program installed on the utility disk to assist in the set-up procedure is provided. Adjustment Procedure 1 Press on the control panel. The message "Your setting will be lost if you press again now." appears and remains on the screen for 5 seconds. While the message is on the screen, press the Auto Adjustment button again to automatically adjust the clock, phase, screen position and resolution. If you do not wish to do adjust the screen, do not press again. NOTE • The Auto adjustment function is intended for use on the Macintosh and on AT-compatible PC running Windows. It may not work properly in either of the following cases. When running an AT-compatible PC on MS-DOS (Not windows). The background color for the "wall paper" or "desktop" pattern is set to black. • It cannot work correctly using with some graphics cards. If the appropriate screen cannot be made by using , adjust the screen through the following procedures. If the appropriate screen can be made, proceed to 4. Range Adjustment . 2 Run the "Screen Adjustment Program". Having read the "Readme.txt" file, run the "Screen Adjustment Program" in the enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by the wizard guide. (If using the Windows, the program can be directly run from the menu screen of the CD-ROM.) Tips • If the user's operating system has no utility disk (e.g. OS/2), we recommend setting the desktop pattern to that as shown in the diagram on the following.

15 3 Adjust by using menu in the Adjustment menu. (1)Vertical bars appear on the screen Use the adjustment. Select the and eliminate the vertical bars by using and of the Control buttons. Do not continuously press the Control buttons, as the adjustment value will change quickly and make it difficult to locate the most suitable adjustment point. If the horizontal flickering, blur or bars appear, proceed to adjustment as follows. (2)Horizontal flickering, blurring or bars appear on the screen. Use the adjustment. Select the and eliminate the horizontal flickering, blurring or bars by using and buttons. NOTE • Horizontal bars may not completely disappear from the screen depending on the PC. (3)The screen position is incorrect. Use the adjustment. The correct displayed position of the monitor is decided because the number and the position of the pixels are fixed. The adjustment moves the image to the correct position. Select and adjust the position by using , , and . If vertical bars of distortion appear after finishing the adjustment, return to adjustment and repeat the previously explained adjustment procedure. ("Clock" => "Phase" => "Position")

(4)Screen image is smaller or larger than the actual screen images. Use the adjustment. Adjustment is needed when the input signal resolution and the resolution now being displayed are different. Select and confirm if the resolution now being displayed is the same as the input resolution. If it is not, adjust the vertical resolution using and and adjust the horizontal resolution using and . 4 Adjust the output signal range (Dynamic Range) of the signal. Use the of menu. This controls the level of output signal range to display the whole color gradation (256 colors). [Procedure] Select the in the Adjustment menu. While the message is on the screen, press on the control panel to adjust the Range Adjustment. The screen blanks for a moment and adjusts the color range to display the whole color gradation of the current output signal. Smaller than the actual screen images. Larger than the actual screen images.

17 3-3. Color Adjustment Simple adjustment [CAL Switch mode] This function allows you to select the best display mode for monitor brightness, etc. To select CAL Switch mode Directly pressing allows you to select the best suited mode for screen display from 4 CAL Switch modes; DICOM-CL, Text, Custom and CAL. Color settings each mode can be adjusted by using the menu of the Adjustment menu. Tips • The Adjustment menu and the CAL Switch mode name cannot be displayed at the same time. Exit Press to exit the menu. CAL Switch Mode Selectable CAL Switch modes are as follows. Mode Purpose DICOM-CL Available for setting tailored to X-ray film color (clear base). Text Suitable for displaying texts for word processing or spreadsheets. Custom Available for making desired setting. CAL Used for monitor calibration Color Adjustment of the Mode Settings , and settings can be adjusted on the CAL Switch menu. Select the desired function icon with and adjust with Control buttons. (Setting(s) of and/or is defined as standard default in some modes. NOTE • "CAL" mode can be adjusted only by Calibration Software. ->DICOM-CL -> Text -> Custom -> CAL Current Mode Mode button Power button CAL SwitchMenu Control buttons [EX.]Custom Settings status of Brightness, Temperature and Gamma Enter button

Advanced Adjustments[Adjustment menu] Color settings of each CAL Switch mode can be adjusted and saved by using the menu of the Adjustment menu. In the analog input, perform the "Range Adjustment" before making the color adjustments. Never change the CAL Switch mode during color adjustment. Select the mode in advance by using Adjustment Items The adjustable items and displayed icons on the menu depend on the selected CAL Switch mode. " √ ": Settable/Adjustable " - ": Fixed at the factory Icons Functions CAL Switch Mode DICOM-CL sRGB Cutom CAL Brightness* - √ √ - Temperature* - √ √ - Gamma* - √ √ - Saturation - √ √ - Hue - √ √ - Gain - - √ - 6 colors - - √ - Reset - √ √ - * These settings can be also adjusted on the CAL Switch menu. (See CAL Switch.) NOTE • Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments. (Allowthe monitor to warm up for at least 30 minutes before making adjustments.) • The values shown in percentages represent the current level within the specific adjustment. They areavailable only as a reference tool. (To create a uniform white or black screen, the percentages for eachwill probably not be the same.)

19 Adjustment Contents Menu Function Descriptions Adjustable range Brightness To set the brightness of the screen 0~100% Tips • The values shown in the “%” are available only as reference. Temperature To set the color temperature 6500K~15000K in 500 K increments (including 9300 K) Tips • The values shown in the Kelvin are available only as a reference tool. • While color temperature is adjusted, is adjusted automatically according to the color temperature. • Setting the temperature under 6500 K or over 15000 K invalidates the color temperature setting. (The color temperature's setting turns "OFF".) • Setting the invalidates the adjustment. Gamma To set the gamma value 1.8~2.6 Saturation To change the saturation -100~100 Setting the minimum level (-100) turns the image to the monochrome. NOTE • The adjustment may cause undisplayable color tone. Hue To change the flesh color, etc. -100~100 NOTE • Using adjustment may not obtain proper tone reproduction. Gain To change each color (red, green and blue) 0~100% By adjusting the red, green and blue color tones for each mode, custom colors can be defined. Display a white or gray background image and adjust the . Tips • The values shown in the “%” are available only as reference. • The setting invalidates this setting. The setting varies with color temperature. 6 colors To adjust and in each color (Red, Yellow, Green, Cyan, Blue and Magenta) Hue: -100 ~ 100 Saturation: -100 ~ 100 Reset To return the color settings to the default settings Select the .

3-4. Power-save Setup The menu in the Adjustment menu enables to set the power-save setup. NOTE • Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. • Even if the monitor is in a power saving mode, USB compliant devices function when they are connected to the monitor's USB (both the upstream and the downstream ports). Therefore, power consumption of the monitor will change according to the connected devices even if the monitor is in a power saving mode. Analog Input This monitor complies with the "VESA DPMS" standard and adopts a power saving method. [Procedure] 1. Set the PC's power saving settings. 2. Select "VESA DPMS" from the menu. [Power Saving System] PC Monitor Power Indicator Operation Operation Blue Power saving STAND-BY SUSPEND OFF Power saving Orange [Power Resumption Procedure] Operate the mouse or keyboard to return to a normal screen. Digital Input This monitor complies with the "DVI DMPM" [Procedure] 1. Set the PC's power saving settings. 2. Select "DVI DMPM" from the menu. [Power Saving System] The monitor enters the power saving mode in five seconds in connection with the PC setting. PC Monitor Power Indicator Operation Operation Blue Power saving Power saving Orange [Power Resumption Procedure] Operate the mouse or keyboard to return to a normal screen.

21 3-5. Off Timer The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed. This function was created to reduce Afterimage characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use. [Procedure] 1. Select in the Adjustment menu menu. 2. Select "Enable" and touch the Right and Left directing switches to adjust the operating time (1 to 23 hours). [Off Timer System] PC Monitor Power Indicator Operating time (1H - 23H) Operation Blue Last 15 min. in operating time Advance Notice *1 Blue Flashing Operating time expired Power Off Off *1 When is pressed during the advance notice period, the monitor continues to operate for additional 90 minutes. Extension of operation time can be set without limitation. [Power Resumption Procedure] Press to return a normal screen. NOTE • The off timer function works while the PowerManager is active, but there is no advance notice before the monitor's power is turned off. 3-6. Locking the settings Use the "Adjustment Lock" function to prevent any accidental changes. Locked function • (Enter button) / Adjustments/settings using • (Mode button) • (Auto Adjustment button) Unlocked function • (Input Signal Selection button) • (Power button) • (Adjustment Lock button) [How to lock] Press for at least 2 seconds to lock the settings. [How to unlock] Press for at least 2 seconds to release the lock. NOTE • The adjustment lock function may activate when calibration is performed with the calibration kit. The monitor can be unlocked using the same unlocking procedure described above.

3-7. Power Indicator Setting Light off the power indicator. This function is available for the multiple panels settings. [Procedure] 1. Select in the Adjustment menu menu. 2. Select "Disable". 3-8. Automatic brightness adjustment The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably. [Procedure] 1. Select in the Adjustment menu menu. 2. Select "Enable". NOTE • This function is not available in the DICOM-CL and CAL modes.

23 3-9. Displaying Lower Resolutions The lower resolutions are enlarged to full screen automatically. Using the function in the menu enables to change the screen size. 1 Enlarge the screen size when displaying a low resolution. Select the . Select the in the menu and select the screen size by using and . Mode Function Full Displays the picture on the screen in full, irrespective of the picture's resolution. Since the verticalresolution and the horizontal resolution are enlarged at different rates, some images may appeardistorted. Enlarged Displays the picture on the screen in full, irrespective of the picture's resolution. Since the vertical resolution and horizontal resolution are enlarged at same rates, some horizontal or vertical image maydisappear. Normal Displays the picture at the actual Screen resolution. Example: Displaying 1280 x 1024 2 Smooth the blurred texts of the enlarged screen. Switch the setting. Select the suitable level from 1 - 5 (Soft - Sharp). Select in the menu and adjust by using the right and left switches. NOTE • is disabled in the following cases. - Screen is displayed in the 1920 x1200. - "Enlarged" is selected in at 800 x 600 resolution. - "Enlarged" is selected in at 1600 x 1200 resolution. - "Normal" is selected in . (1920 × 1200) (1500 × 1200) (1280 × 1024) Full (Default Setting) Enlarged Normal

3 Set the brightness of the black area surrounding the displayed image. Set the . In the mode or mode, the outer area (border) is usually black. Select in the menu and adjust by using . 3-10. Setting the orientation of the Adjustment menu The orientation of the Adjustment menu can be changed. [Procedure] 1. Select in the Adjustment menu menu. 2. Select in the menu. 3. Use to select between "Portrait" and "Landscape". 3-11. EIZO Logo Appearing Function When switching on the power button on the front control panel, the EIZO logo is displayed for a while. If you desire to display or undisplay this logo, use this function. (Default is logo appearing.) [To undisplay] 1. Press to turn off the unit. 2. Press again while pressing . The EIZO logo does not appear on the screen. [To display] 1. Press to turn off the unit. 2. Press again while pressing . The EIZO logo appear on the screen. Border

• No-picture problems : See No.1 - No.2 • Imaging problems : See No.3 - No.14 • Other problems : See No.15 - No.18 • USB problems : See No.19 - No.20 Problems Possible cause and remedy 1. No picture • Power indicator does not light. • Check whether the power cord is connected correctly. If the problem persists, turn off the monitor, and then turn it on again a few minutes later. • Press . • Power indicator is lighting blue. • Check gain setting (page 19). • Power indicator is lighting orange. • Switch the input signal with . • Operate the mouse or keyboard. • Turn on the PC. 2. The message below appears. This message appears when the signal is not input correctly even when the monitor functions properly. • This message appears when no signal is input. (This is displayed for about 40 seconds) • The message shown left may appear, because some PCs do not output the signal soon after power-on. • Check whether the PC is turned on. • Check whether the signal cable is connected properly. • Switch the input signal with . • The message below shows that the input signal is out of the specified frequency range. (Such signal frequency is displayed in red.) Example: • Reboot the PC. • Select an appropriate display mode using the graphics board’s utility. Refer to the manual of the graphics board for details.

3. Display position is incorrect. • Adjust image position so that it is displayed properly within the display area using the adjustment (page 15). • Adjust image position so that it is displayed properly within the display area using the "Hor.Position" and "Ver. Position" adjustment (page 15). • If the problem persists, use the graphics board’s utility if available to change the display position. 4. Screen image displayed is smaller or larger than the actual screen image. • Adjust the resolution using so that the input signal resolution equals the resolution in the resolution adjustment menu (page 16). 5. Vertical bars appear on the screen or a part of the image is flickering. • Adjust using (page 15). 6. The characters and images have several vertical bars on their right side. • Adjust the characters and images using the . 7. Whole screen is flickering or blurring. • Adjust using (page 15). 8. Characters are blurred. • Adjust using (page 23). 9. Upper part of the screen is distorted as shown below. • This is caused when both composite sync (X-OR) signal and separate vertical sync signal are input simultaneously. Select either composite signal or separate signal 10.The screen is too bright or too dark. • Adjust . (The LCD monitor backlight has a fixed life span. When the screen becomes dark or begins to flicker, contact your local dealer.) 11.Afterimages appear. • Use a screen saver or off timer function for a long-time image display. • Afterimages are particular to LCD monitors. Avoid displaying the same image for a long time. 12.Green/red/blue/white dots or defective dots remain on the screen. • This is due to LCD panel characteristics and is not a failure. 13.Interference patterns or fingerprints remain on the screen. • Leave the monitor with a white screen or a black screen. The symptom may disappear.

14.Noise appears on the screen. • When entering the signals of analog input, select 1 to 4 in from the menu to change the mode. • When entering the signals of HDCP system, the normal images may not be displayed immediately. 15.The icon on the Adjustment menu cannot be selected. • is disabled when the screen is displayed in the following resolutions. •1920 × 1200 •Select "Enlarged" during in the resolution of 800 × 600 •Select "Enlarged" during in the resolution of 1600 × 1200 •Select "Normal" during mode. 16.The Main menu of Adjustment menu does not start. • Check for Adjustment Lock function (page 21). 17.The CAL Switch mode is not displayed. • Check for Adjustment Lock function (page 21). 18. does not function. • does not function when digital signal is input. • Check for Adjustment Lock function (page 21). 19.PC is hung up. / The peripherals connected to the downstream ports do not operate. • Check that the USB cable is correctly connected. • Check the downstream ports by connecting the peripherals to other downstream ports. If the problem is solved by doing this, contact an EIZO dealer. (For details, refer to the manual of the PC.) • Try executing the following method. •Restarting the PC •Connecting the PC and peripherals directly If the problem is solved by doing this, contact an EIZO dealer. 20.USB function cannot be setup. • Check that the USB cable is correctly connected. • Check that the PC and OS are USB compliant. (For verification of USB support, consult the manufacturer of each system.) • Check the PC's BIOS setting for USB. (For details, refer to the manual of the PC.)

The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD monitor. NOTE • If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting. - Hole spacing on the arm mounting 100 mm x 100 mm (VESA compliant) - Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such as a cable - TÜV/GS approved arm or stand • Please connect cables after attaching an arm stand. Setup Procedure 1 Lay the LCD monitor down. Do not scratch the panel. 2 Remove the tilt stand by loosening the screws. Unscrew the four screws securing the unit and the satand with the screwdriver. 3 Attach an arm stand to the LCD monitor securely. Secure the monitor to the arm or stand using the screws specified in the user's manual of the arm or stand.

NOTE • Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. Cabinet To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent. Do not spray wax or cleaner directly into the cabinet. (For details, refer to the manual of the PC.) LCD Panel • The LCD surface can be cleaned with a soft cloth, such as cotton or lens paper. • For stubborn stains, use the cleaning kit "ScreenCleaner"(Optional) or gently wipe the affected area using a cloth moistened with water or an ethanol-based cleaner.

Surface treatment : Anti-Glare Hard Coating Surface hardness : 3H Response Time : 16ms Viewing Angle Horizontal : 178°, Vertical : 178°(CR: 10 or more) Dot Pitch 0.270mm Horizontal Scan Frequency Analog 24~94 kHz (Automatic) Digital 31~76 kHz Vertical Scan Frequency Analog 49~86 Hz (Automatic) (1600x1200 : 49 ~ 76 Hz) (1920x1200 : 49 ~ 61 Hz) Digital 59 ~ 61 Hz (VGA TEXT: 69 ~ 71 Hz) Resolution 1920 dots x 1200 lines Dot Clock (Max.) Analog 202.5 MHz Digital 162 MHz Display Colors 16.77 million colors (max.) Display Area 518.4 mm (H) × 324.0 mm (V) (20.4" (H) x 12.8" (V)) Power Supply 100-120/200-240 VAC±10%, 50/60 Hz, 1.1 A/0.55A (with USB) Power Consumption Max. Max. (Normal) Power Saving Mode :110 W (with USB) :100W (without USB) :Less than 2 W (for single signal input without USB) Input Signal Connector DVI-I connector (Applicable to HDCP)×2 Analog Input Signal (Sync) Separate, TTL, Positive/Negative Composite, TTL, Positive/Negative Analog Input Signal (Video) 0.7 Vp-p / 75 ohms, Positive Input Signal (Digital) TMDS (Single Link) Signal registration Analog 45 (Factory preset: 30) Digital 10 (Factory preset: 0) Plug & Play VESA DDC 2B / EDID structure 1.3 Dimensions with stand 566 mm (W) x 456 ~ 538 mm (H) x 208.5 mm (D) (22.3"(W) x 18" ~ 21.2" (H) x 8.2"(D)) without stand 566 mm (W) x 367 mm (H) x 85 mm (D) (22.3"(W) x 14.4" (H) x 3.35"(D)) Weight with stand 10.4 kg (22.9 lbs.) without stand 7.4 kg (16.3 lbs.) Environment Conditions Temperature Operating Storage : 0°C ~ 35°C (32°F ~ 95°F) : -20°C ~ 60°C (-4°F ~ 140°F) Operating Storage : 30% to 80% R.H. Non-condensing : 30% to 80% R.H. Non-condensing Pressure Operating Storage : 700 to 1060 hPa. : 200 to 1060 hPa. USB standard USB Specification Revision 2.0 USB port Upstream port x 1 Downstream port x 2 Communication Speed 480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low) Power Supply Downstream: 500 mA for each (max.)

DICOM-CL PowerManager Analog input : VESA DPMS Digital input:DVI DMPM Screen Size Full Off Timer Disable Menu Settings Menu Size Normal Menu Off Timer 45 seconds BrightRegulator Disable Language English Dimensions 566(22.3) 520.4(20.5) 328(12.8) 367(14.4) 85(3.35) 56.3(2.22) 456～568(18～22.4) 168(6.6) 35° 35° 208.5(8.2) 100(3.9) 233(9.2) 233(9.2) 133.5(5.3) 100(3.9) 40° 222.5(8.8) 12～71.5(0.47～2.81) 287.5(11.3) 89(3.5) mm(inch)

5 6 7 8 9 10 11 12 13 14 15 16 19 20 21 17 18 22 23 24 C1 C2 C3 C4 C5 Pin No. Signal Pin No. Signal Pin No. Signal 1 TMDS Data 2- 11 TMDS Data1/3 Shield 21 NC* 2 TMDS Data 2+ 12 NC* 22 TMDS Clock shield 3 TMDS Data2/4 Shield 13 NC* 23 TMDS Clock+ 4 NC* 14 +5V Power 24 TMDS Clock- 5 NC* 15 Ground (return for +5V, Hsync and Vsync) C1 Analog Red 6 DDC Clock (SCL) 16 Hot Plug Detect C2 Analog Green 7 DDC Data (SDA) 17 TMDS Data0- C3 Analog Blue 8 Analog Vertical Sync 18 TMDS Data0+ C4 Analog Horizontal Sync 9 TMDSData1- 19 TMDS Data0/5 Shield C5 Analog Ground(analog R,G,&B return) 10 TMDS Data1+ 20 NC* (*NC: No Connection) •USB Port No. Signal Remarks 1 VCC Cable power 2 - Data Serial data 3 + Data Serial data 4 Ground Cable Ground Upstream Downstream Series B Connector Series A Connector

circuitry. To convert the signal correctly, the LCD monitor needs to produce the same number clock pulse as the dot clock of the graphics system. When the clock pulse is not correctly set, some vertical bars of distortion are displayed on the screen. DICOM (Digital Imaging and Communication in Medicine) DICOM is a standard for digital imaging and communication for medical use developed by American College of Radiology and National Electric Manufacturers Association. DVI (Digital Visual Interface) A digital flat panel interface. DVI can transmit digital data from the PC directly without loss with the signal transition method "TMDS". There are two kinds of DVI connectors. One is DVI-D connector for digital signal input only. The other is DVI-I connector for both digital and analog signal inputs. DVI DMPM (DVI Digital Monitor Power Management) The Power management system for the digital interface. The "Monitor ON" status (operation mode) and the "Active Off" status (power-saving mode) are indispensable for the DVI-DMPM as the monitor's power mode. Gain Adjustment Adjusts each color parameter for red, green and blue. The color of the LCD monitor is displayed through the color filter of the LCD panel. Red, green and blue are the three primary colors. The colors on the monitor are displayed by combining these three colors. The color tone can change by adjusting the illumination amount passed through each color's filter. Gamma Generally, the relationship that the light intensity values of a monitor change nonlinearly to the input signal level is called "Gamma Characteristic". On the monitor, low gamma values display the whitish images and high gamma values display the high contrast images. HDCP (High-bandwidth Digital Contents Protection) Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. This helps to transmit the digital contents safely by coding the digital contents sent via DVI terminal on the output side and decoding them on the input side. Any digital contents cannot be reproduced if both of the equipments on the output and input sides are not applicable to HDCP system. Phase The phase adjustment decides the sampling timing point for converting the analog input signal to a digital signal. Adjusting the phase after the clock adjustment will produce a clear screen. Range Adjustment The Range Adjustment controls the level of output signal range to display the whole color gradation.

image. This monitor consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920 x 1200 , all pixels are displayed as a full screen. Temperature Color Temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. At high temperatures the white tone appears somewhat blue, while at lower temperatures it appears somewhat red. Computer monitors generally give best performance at high temperature settings. 5000 K: Slightly reddish white. 6500 K: Warm-white tone, similar to white paper or daylight. 9300 K: Slightly bluish white. TMDS (Transition Minimized Differential Signaling) A signal transition method for the digital interface. VESA DPMS (Video Electronics Standards Association - Display Power Management Signaling) The acronym VESA stands for "Video Electronics Standards Association", and DPMS stands for "Display Power Management Signaling". DPMS is a communication standard that PCs and graphics boards use to implement power savings on the monitor side.

Timing-Übersichten für Analog Eingang Synchronisation des Signaux pour Analog numerique NOTE • Based on the signal diagram shown below factory presets have been registered in the monitor's microprocessor. • Der integrierte Mikroprozessor des Monitors unterstützt werkseitige Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme). • Signaux ont été enregistrés en usine dans le microprocesseur du moniteur, conformément au diagramme de synchronisation ci-dessous. Mode Dot Clock MHz Frequencies Sync Polarity Horizontal:kHz Vertical:Hz VGA 640×480@60Hz 25.2 MHz Horizontal 31.47 Negative Vertical 59.94 Negative VGA TEXT 720×400@70Hz 28.3 MHz Horizontal 31.47 Negative Vertical 70.09 Positive Macintosh 640×480@67Hz 30.2 MHz Horizontal 35.00 Negative Vertical 66.67 Negative Macintosh 832×624@75Hz 57.3 MHz Horizontal 49.73 Negative Vertical 74.55 Negative Macintosh 1152×870@75Hz 100.0 MHz Horizontal 68.68 Negative Vertical 75.06 Negative Macintosh 1280×960@75Hz 126.2 MHz Horizontal 74.76 Positive Vertical 74.76 Positive VESA 640×480@72Hz 31.5 MHz Horizontal 37.86 Negative Vertical 72.81 Negative VESA 640×480@75Hz 31.5 MHz Horizontal 37.50 Negative Vertical 75.00 Negative VESA 640×480@85Hz 36.0 MHz Horizontal 43.27 Negative Vertical 85.01 Negative VESA 800×600@56Hz 36.0 MHz Horizontal 35.16 Positive Vertical 56.25 Positive VESA 800×600@60Hz 40.0 MHz Horizontal 37.88 Positive Vertical 60.32 Positive VESA 800×600@72Hz 50.0 MHz Horizontal 48.08 Positive Vertical 72.19 Positive VESA 800×600@75Hz 49.5 MHz Horizontal 46.88 Positive Vertical 75.00 Positive VESA 800×600@85Hz 56.3 MHz Horizontal 53.67 Positive Vertical 85.06 Positive VESA 1024×768@60Hz 65.0 MHz Horizontal 48.36 Negative Vertical 60.00 Negative VESA 1024×768@70Hz 75.0 MHz Horizontal 56.48 Negative Vertical 70.07 Negative VESA 1024×768@75Hz 78.8 MHz Horizontal 60.02 Positive Vertical 75.03 Positive VESA 1024×768@85Hz 94.5 MHz Horizontal 68.68 Positive Vertical 85.00 Positive VESA 1152×864@75Hz 108.0 MHz Horizontal 67.50 Positive Vertical 75.00 Positive VESA 1280×960@60Hz 108.0 MHz Horizontal 60.00 Positive Vertical 60.00 Positive VESA 1280×1024@60Hz 108.0 MHz Horizontal 63.98 Positive Vertical 60.02 Positive VESA 1280×1024@75Hz 135.0 MHz Horizontal 79.98 Positive Vertical 75.03 Positive VESA 1280×1024@85Hz 157.5 MHz Horizontal 91.15 Positive Vertical 85.03 Positive VESA 1600×1200@60Hz 162.0 MHz Horizontal 75.00 Positive Vertical 60.00 Positive VESA 1600×1200@65Hz 175.0 MHz Horizontal 81.30 Positive Vertical 65.00 Positive

146.3 MHz Horizontal 65.29 Negative Vertical 59.95 Positive VESA CVT 1920×1200 60Hz 193.3 MHz Horizontal 74.56 Negative Vertical 59.89 Positive VESA CVT RB 1920×1200 60Hz 154.0 MHz Horizontal 74.04 Positive Vertical 59.95 Negative

means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment. Some of the features of the TCO’03 Display requirements: Ergonomics ● Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy ● Energy-saving mode after a certain time - beneficial both for the user and environment ● Electrical safety Emissions ● Electromagnetic fields ● Noise emissions Ecology ● The products must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14000 ● Restrictions on ● chlorinated and brominated flame retardants and polymers ● heavy metals such as cadmium, mercury and lead. The requirements includes in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit www.tcodevelopment.com

FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: FlexScan MX240W is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver. * Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (Enclosed) Canadian Notice This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.

Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen: Der Standfuß muß den nachfolgenden Anforderungen entsprechen: a) Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der zugehörenden Bedienungsanleitung angegeben. b) Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher als die Augenhöhe eines Benutzers in sitzender Position ist. c) Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt. d) Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach hinten ≥ 5°). e) Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ±180°). Der maximale Kraftaufwand dafür muß weniger als 100 N betragen. f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde. g) Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt). h) Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position kippsicher sein. Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB2000 mit dem Videosignal, 1920 × 1200 , Digital Eingang und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.) „Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779“