Texas Instruments TPS62851 EVM-139 Series Operation & User’s Manual

www.ti.com Board Layout SLVUBY6A – AUGUST 2020 – REVISED JUNE 2021 Submit Document Feedback TPS62851xEVM-139 Evaluation Module 7 Copyright © 2021 Texas Instruments Incorporated ...

efficiency. The devices focus on high-efficiency, step-down conversion over a different output current range. The internal compensation circuit allows a compact solution and small external components. The device is available in a 2.1-mm × 1.6-mm (including pins) in SOT583 package. 1.1 Performance Specifications Table 1-1 provides a summary of the TPS62851xEVM-139 performance specifications. Table 1-1. Performance Specifications Summary SPECIFICATIONS TEST CONDITIONS MIN TYP M ...

www.ti.com Board Layout SLVUBY6A – AUGUST 2020 – REVISED JUNE 2021 Submit Document Feedback TPS62851xEVM-139 Evaluation Module 7 Copyright © 2021 Texas Instruments Incorporated ...

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Le prés ...

Board Layout www.ti.com 8 TPS62851xEVM-139 Evaluation Module SLVUBY6A – AUGUST 2020 – REVISED JUNE 2021 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated ...

1. Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein. User's acceptance of the EVM is expressly subject to the following terms. 1.1 EVMs are intended solely for product or software developers for use in a research and development setting to facilitate feasibility evaluation, experimentation, or scientific ...

FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product. This kit is not a finished product and when assembled may not be resold or otherwise marketed unless all required FCC equipment authorizations are first obtained. Operation is subject to the condition ...

2.1 Connector Descriptions J1, Pin 1 and 2 – VIN Positive input voltage connection from the input supply for the EVM J1, Pin 3 and 4 – S+/S– Input voltage sense connections. Measure the input voltage at this point. J1, Pin 5 and 6 – GND Input return connection from the input supply for the EVM J2, Pin 1 and 2 – VOUT Positive output voltage connection J2, Pin 3 and 4 – S+/S– Output voltage sense connections. Measure the output voltage at this point. J2, Pin 5 and 6 – GND Output return connection JP1 – EN ...